@@ -1,5 +1,122 @@
/*
- * arch/arm/mach-omap1/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include <plat/serial.h>
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP7XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP1UART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap7xx/8xx based boards using UART1 with shift 0 */
+ DEBUG_LL_OMAP7XX(1, herald);
+ DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+ /* omap15xx/16xx based boards using UART1 */
+ DEBUG_LL_OMAP1(1, ams_delta);
+ DEBUG_LL_OMAP1(1, nokia770);
+ DEBUG_LL_OMAP1(1, omap_h2);
+ DEBUG_LL_OMAP1(1, omap_h3);
+ DEBUG_LL_OMAP1(1, omap_innovator);
+ DEBUG_LL_OMAP1(1, omap_osk);
+ DEBUG_LL_OMAP1(1, omap_palmte);
+ DEBUG_LL_OMAP1(1, omap_palmz71);
+
+ /* omap15xx/16xx based boards using UART2 */
+ DEBUG_LL_OMAP1(2, omap_palmtt);
+
+ /* omap15xx/16xx based boards using UART3 */
+ DEBUG_LL_OMAP1(3, sx1);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
@@ -1,5 +1,176 @@
/*
- * arch/arm/mach-omap2/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include <plat/serial.h>
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP2(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP4UART##p)
+
+#define DEBUG_LL_OMAP5(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP5UART##p)
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach) \
+ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+#define DEBUG_LL_TI81XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI81XXUART##p)
+
+#define DEBUG_LL_AM33XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ AM33XXUART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap2 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap_2430sdp);
+ DEBUG_LL_OMAP2(1, omap_apollon);
+ DEBUG_LL_OMAP2(1, omap_h4);
+
+ /* omap2 based boards using UART3 */
+ DEBUG_LL_OMAP2(3, nokia_n800);
+ DEBUG_LL_OMAP2(3, nokia_n810);
+ DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+ /* omap3 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap3evm);
+ DEBUG_LL_OMAP3(1, omap_3430sdp);
+ DEBUG_LL_OMAP3(1, omap_3630sdp);
+ DEBUG_LL_OMAP3(1, omap3530_lv_som);
+ DEBUG_LL_OMAP3(1, omap3_torpedo);
+
+ /* omap3 based boards using UART3 */
+ DEBUG_LL_OMAP3(3, cm_t35);
+ DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
+ DEBUG_LL_OMAP3(3, craneboard);
+ DEBUG_LL_OMAP3(3, devkit8000);
+ DEBUG_LL_OMAP3(3, igep0020);
+ DEBUG_LL_OMAP3(3, igep0030);
+ DEBUG_LL_OMAP3(3, nokia_rm680);
+ DEBUG_LL_OMAP3(3, nokia_rm696);
+ DEBUG_LL_OMAP3(3, nokia_rx51);
+ DEBUG_LL_OMAP3(3, omap3517evm);
+ DEBUG_LL_OMAP3(3, omap3_beagle);
+ DEBUG_LL_OMAP3(3, omap3_pandora);
+ DEBUG_LL_OMAP3(3, omap_ldp);
+ DEBUG_LL_OMAP3(3, overo);
+ DEBUG_LL_OMAP3(3, touchbook);
+
+ /* omap4 based boards using UART3 */
+ DEBUG_LL_OMAP4(3, omap_4430sdp);
+ DEBUG_LL_OMAP4(3, omap4_panda);
+
+ /* omap5 based boards using UART3 */
+ DEBUG_LL_OMAP5(3, omap5_sevm);
+
+ /* zoom2/3 external uart */
+ DEBUG_LL_ZOOM(omap_zoom2);
+ DEBUG_LL_ZOOM(omap_zoom3);
+
+ /* TI8168 base boards using UART3 */
+ DEBUG_LL_TI81XX(3, ti8168evm);
+
+ /* TI8148 base boards using UART1 */
+ DEBUG_LL_TI81XX(1, ti8148evm);
+
+ /* AM33XX base boards using UART1 */
+ DEBUG_LL_AM33XX(1, am335xevm);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
deleted file mode 100644
@@ -1,204 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include <plat/serial.h>
-
-#define MDR1_MODE_MASK 0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
- /*
- * Get address of some.bss variable and round it down
- * a la CONFIG_AUTO_ZRELADDR.
- */
- u32 ram_start = (u32)&uart_shift & 0xf8000000;
- u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
- *uart_info = port;
-}
-
-static void putc(int c)
-{
- if (!uart_base)
- return;
-
- /* Check for UART 16x mode */
- if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
- return;
-
- while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
- barrier();
- uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
- if (machine_is_##mach()) { \
- uart_base = (volatile u8 *)(dbg_uart); \
- uart_shift = (dbg_shft); \
- port = (dbg_id); \
- set_omap_uart_info(port); \
- break; \
- }
-
-#define DEBUG_LL_OMAP7XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP2(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP2UART##p)
-
-#define DEBUG_LL_OMAP3(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP3UART##p)
-
-#define DEBUG_LL_OMAP4(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP4UART##p)
-
-#define DEBUG_LL_OMAP5(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP5UART##p)
-/* Zoom2/3 shift is different for UART1 and external port */
-#define DEBUG_LL_ZOOM(mach) \
- _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-
-#define DEBUG_LL_TI81XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- TI81XXUART##p)
-
-#define DEBUG_LL_AM33XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- AM33XXUART##p)
-
-static inline void arch_decomp_setup(void)
-{
- int port = 0;
-
- /*
- * Initialize the port based on the machine ID from the bootloader.
- * Note that we're using macros here instead of switch statement
- * as machine_is functions are optimized out for the boards that
- * are not selected.
- */
- do {
- /* omap7xx/8xx based boards using UART1 with shift 0 */
- DEBUG_LL_OMAP7XX(1, herald);
- DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
- /* omap15xx/16xx based boards using UART1 */
- DEBUG_LL_OMAP1(1, ams_delta);
- DEBUG_LL_OMAP1(1, nokia770);
- DEBUG_LL_OMAP1(1, omap_h2);
- DEBUG_LL_OMAP1(1, omap_h3);
- DEBUG_LL_OMAP1(1, omap_innovator);
- DEBUG_LL_OMAP1(1, omap_osk);
- DEBUG_LL_OMAP1(1, omap_palmte);
- DEBUG_LL_OMAP1(1, omap_palmz71);
-
- /* omap15xx/16xx based boards using UART2 */
- DEBUG_LL_OMAP1(2, omap_palmtt);
-
- /* omap15xx/16xx based boards using UART3 */
- DEBUG_LL_OMAP1(3, sx1);
-
- /* omap2 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap_2430sdp);
- DEBUG_LL_OMAP2(1, omap_apollon);
- DEBUG_LL_OMAP2(1, omap_h4);
-
- /* omap2 based boards using UART3 */
- DEBUG_LL_OMAP2(3, nokia_n800);
- DEBUG_LL_OMAP2(3, nokia_n810);
- DEBUG_LL_OMAP2(3, nokia_n810_wimax);
-
- /* omap3 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap3evm);
- DEBUG_LL_OMAP3(1, omap_3430sdp);
- DEBUG_LL_OMAP3(1, omap_3630sdp);
- DEBUG_LL_OMAP3(1, omap3530_lv_som);
- DEBUG_LL_OMAP3(1, omap3_torpedo);
-
- /* omap3 based boards using UART3 */
- DEBUG_LL_OMAP3(3, cm_t35);
- DEBUG_LL_OMAP3(3, cm_t3517);
- DEBUG_LL_OMAP3(3, cm_t3730);
- DEBUG_LL_OMAP3(3, craneboard);
- DEBUG_LL_OMAP3(3, devkit8000);
- DEBUG_LL_OMAP3(3, igep0020);
- DEBUG_LL_OMAP3(3, igep0030);
- DEBUG_LL_OMAP3(3, nokia_rm680);
- DEBUG_LL_OMAP3(3, nokia_rm696);
- DEBUG_LL_OMAP3(3, nokia_rx51);
- DEBUG_LL_OMAP3(3, omap3517evm);
- DEBUG_LL_OMAP3(3, omap3_beagle);
- DEBUG_LL_OMAP3(3, omap3_pandora);
- DEBUG_LL_OMAP3(3, omap_ldp);
- DEBUG_LL_OMAP3(3, overo);
- DEBUG_LL_OMAP3(3, touchbook);
-
- /* omap4 based boards using UART3 */
- DEBUG_LL_OMAP4(3, omap_4430sdp);
- DEBUG_LL_OMAP4(3, omap4_panda);
-
- /* omap5 based boards using UART3 */
- DEBUG_LL_OMAP5(3, omap5_sevm);
-
- /* zoom2/3 external uart */
- DEBUG_LL_ZOOM(omap_zoom2);
- DEBUG_LL_ZOOM(omap_zoom3);
-
- /* TI8168 base boards using UART3 */
- DEBUG_LL_TI81XX(3, ti8168evm);
-
- /* TI8148 base boards using UART1 */
- DEBUG_LL_TI81XX(1, ti8148evm);
-
- /* AM33XX base boards using UART1 */
- DEBUG_LL_AM33XX(1, am335xevm);
- } while (0);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
This allows us to eventually move omap2+ to generic debug code that's configured in Kconfig for the port. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/include/mach/uncompress.h | 121 +++++++++++++++ arch/arm/mach-omap2/include/mach/uncompress.h | 175 +++++++++++++++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 204 ------------------------- 3 files changed, 292 insertions(+), 208 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/uncompress.h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html