@@ -40,11 +40,6 @@
#define PWRDM_TRACE_STATES_FLAG (1<<31)
-enum {
- PWRDM_STATE_NOW = 0,
- PWRDM_STATE_PREV,
-};
-
/* Types of sleep_switch used in pwrdm_set_fpwrst() */
#define ALREADYACTIVE_SWITCH 0
#define FORCEWAKEUP_SWITCH 1
@@ -600,60 +595,97 @@ static void _pwrdm_update_pwrst_time(struct powerdomain *pwrdm, int prev)
#endif
}
-/* XXX Caller must hold pwrdm->_lock */
-static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
+/**
+ * _pwrdm_state_switch - record powerdomain usage data; track power state
+ * (before powerdomain state transition)
+ * @pwrdm: struct powerdomain * to observe
+ *
+ * If the powerdomain @pwrdm's current power state is not what we last
+ * observed it to be, then increment the counter for that power state.
+ * This is used to track context loss events, and for debugging. Also
+ * if CONFIG_PM_DEBUG=y, track the amount of time the powerdomain has
+ * spent in the current power state. Caller must hold pwrdm->_lock.
+ * Intended to be called immediately before the powerdomain's power
+ * state is likely to change. XXX Note that the counts and durations
+ * observed by this function may be inaccurate. Powerdomains can
+ * transition power states automatically, without the kernel being
+ * involved -- for example, a device can DMA data from memory while
+ * the MPU is asleep. This function does not attempt to account for
+ * that. XXX It may be possible to skip this function completely if
+ * PM debugging is not needed and off-mode and OSWR is disabled (e.g.,
+ * no context loss events). No return value.
+ */
+static void _pwrdm_state_switch(struct powerdomain *pwrdm)
{
- int prev, next, fpwrst, trace_state = 0;
-
- if (pwrdm == NULL)
- return -EINVAL;
+ int fpwrst;
fpwrst = _pwrdm_read_fpwrst(pwrdm);
-
- switch (flag) {
- case PWRDM_STATE_NOW:
- prev = pwrdm->fpwrst;
- break;
- case PWRDM_STATE_PREV:
- prev = _pwrdm_read_prev_fpwrst(pwrdm);
- if (pwrdm->fpwrst != prev)
- pwrdm->fpwrst_counter[prev - PWRDM_FPWRST_OFFSET]++;
- /*
- * If the power domain did not hit the desired state,
- * generate a trace event with both the desired and hit states
- */
- next = _pwrdm_read_next_fpwrst(pwrdm);
- if (next != prev) {
- trace_state = (PWRDM_TRACE_STATES_FLAG | next << 8 |
- prev);
- trace_power_domain_target(pwrdm->name, trace_state,
- smp_processor_id());
- }
- break;
- default:
- return -EINVAL;
- }
-
- if (fpwrst != prev)
+ if (fpwrst != pwrdm->fpwrst)
pwrdm->fpwrst_counter[fpwrst - PWRDM_FPWRST_OFFSET]++;
- _pwrdm_update_pwrst_time(pwrdm, prev);
+ _pwrdm_update_pwrst_time(pwrdm, pwrdm->fpwrst);
pwrdm->fpwrst = fpwrst;
-
- return 0;
}
static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
{
pwrdm_clear_all_prev_pwrst(pwrdm);
- _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+ _pwrdm_state_switch(pwrdm);
return 0;
}
+/**
+ * _pwrdm_post_transition_cb - record powerdomain usage data; track power state
+ * (after powerdomain power state transition)
+ * @pwrdm: struct powerdomain * to observe
+ *
+ * If the powerdomain @pwrdm's previous power state doesn't match our
+ * recollection of the powerdomain's current power state, then
+ * increment the counter for the previous power state. And if the
+ * powerdomain's previous power state doesn't match the current power
+ * state, increment the counter for the current power state. This
+ * function is used to track context loss events, and for debugging.
+ * Also if CONFIG_PM_DEBUG=y, track the approximate amount of time the
+ * powerdomain has spent in the previous power state. Caller must
+ * hold pwrdm->_lock. XXX Note that the counts and durations observed
+ * by this function may be inaccurate. Powerdomains can transition
+ * power states automatically, without the kernel being involved --
+ * for example, a device can DMA data from memory while the MPU is
+ * asleep. This function does not attempt to account for that. XXX
+ * It may be possible to skip this function completely if PM debugging
+ * is not needed and off-mode and OSWR is disabled (e.g., no context
+ * loss events). No return value.
+ */
static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
{
- _pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
+ int prev, next, fpwrst;
+ int trace_state = 0;
+
+ prev = _pwrdm_read_prev_fpwrst(pwrdm);
+ if (pwrdm->fpwrst != prev)
+ pwrdm->fpwrst_counter[prev - PWRDM_FPWRST_OFFSET]++;
+
+ _pwrdm_update_pwrst_time(pwrdm, prev);
+
+ /*
+ * If the power domain did not hit the desired state,
+ * generate a trace event with both the desired and hit states
+ */
+ next = _pwrdm_read_next_fpwrst(pwrdm);
+ if (next != prev) {
+ trace_state = (PWRDM_TRACE_STATES_FLAG | next << 8 |
+ prev);
+ trace_power_domain_target(pwrdm->name, trace_state,
+ smp_processor_id());
+ }
+
+ fpwrst = _pwrdm_read_fpwrst(pwrdm);
+ if (fpwrst != prev)
+ pwrdm->fpwrst_counter[fpwrst - PWRDM_FPWRST_OFFSET]++;
+
+ pwrdm->fpwrst = fpwrst;
+
return 0;
}
@@ -1055,7 +1087,7 @@ int pwrdm_state_switch_nolock(struct powerdomain *pwrdm)
ret = arch_pwrdm->pwrdm_wait_transition(pwrdm);
if (!ret)
- ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+ _pwrdm_state_switch(pwrdm);
return ret;
}
@@ -237,6 +237,7 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
int pwrdm_state_switch_nolock(struct powerdomain *pwrdm);
int pwrdm_state_switch(struct powerdomain *pwrdm);
+int pwrdm_state_switch_nolock(struct powerdomain *pwrdm);
int pwrdm_pre_transition(struct powerdomain *pwrdm);
int pwrdm_post_transition(struct powerdomain *pwrdm);
int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
Move the pwrdm_state_switch() code that deals with previous power states into the post-transition callback. This improves the clarity of pwrdm_state_switch() considerably. Add some sorely-needed kerneldoc for these functions. It should be possible to drop pwrdm_state_switch() completely during 3.9. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/powerdomain.c | 118 ++++++++++++++++++++++++------------- arch/arm/mach-omap2/powerdomain.h | 1 2 files changed, 76 insertions(+), 43 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html