@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
+ omap3-n900.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
new file mode 100644
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 (or later) as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/include/ "omap34xx.dtsi"
+
+/ {
+ model = "Nokia N900";
+ compatible = "nokia,omap3-n900", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+// cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+};
+
+&i2c1 {
+ clock-frequency = <2200000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&twl_gpio {
+ ti,pullups = <0x0>;
+ ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mmc1 {
+ status = "disabled";
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mcspi1 {
+ mipid@2 {
+ compatible = "acx565akm";
+ spi-max-frequency = <6000000>;
+ reg = <2>;
+ };
+};
+
+/*
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ mode = <2>;
+ power = <50>;
+};
+*/
new file mode 100644
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP35xx SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ /* OMAP343x/OMAP35xx variants OPP1-5 */
+ operating-points = <
+ /* kHz uV */
+ 125000 975000
+ 250000 1075000
+ 500000 1200000
+ 550000 1270000
+ 600000 1350000
+ >;
+ clock-latency = <300000>; /* From legacy driver */
+ };
+ };
+};
@@ -21,6 +21,10 @@
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
+#include "sdram-nokia.h"
+#include "soc.h"
+#include "board-rx51-secure.h"
+#include <linux/regulator/machine.h>
#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
#define intc_of_init NULL
@@ -35,20 +39,57 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
{ }
};
-static void __init omap_generic_init(void)
+extern void rx51_init_base(void);
+extern void rx51_init(void);
+extern int __init rx51_i2c_init(void);
+extern void __init rx51_peripherals_init(void);
+extern void __init rx51_spi_init(void);
+
+
+void __init omap_generic_init(void)
{
- omap_sdrc_init(NULL, NULL);
+ struct omap_sdrc_params *sdrc_params;
+
+#ifdef CONFIG_ARM_ERRATA_430973
+ if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+ printk(KERN_INFO "RX-51: Enabling ARM errata 430973 workaround.\n");
+ /* set IBE to 1 */
+ rx51_secure_update_aux_cr(1 << 6, 0);
+ } else {
+ extern bool early_print_redirect;
+
+ early_print_redirect = 1;
+ }
+#endif
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
+#if 1
+ printk("*** omap: populating platform\n");
of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+#endif
/*
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
*/
- if (of_machine_is_compatible("ti,omap4-panda"))
+ if (of_machine_is_compatible("ti,omap4-panda")) {
omap4_panda_display_init_of();
- else if (of_machine_is_compatible("ti,omap4-sdp"))
+ return;
+ }
+ if (of_machine_is_compatible("ti,omap4-sdp")) {
omap_4430sdp_display_init_of();
+ return;
+ }
+#ifdef CONFIG_MACH_NOKIA_RX51
+ if (of_machine_is_compatible("nokia,omap3-n900")) {
+ regulator_use_dummy_regulator();
+ rx51_spi_init();
+ return;
+ }
+ panic("really want to init video\n");
+#endif
}
#ifdef CONFIG_SOC_OMAP2420
@@ -131,6 +131,7 @@ static long twl4030_madc_ioctl(struct file *filp, unsigned int cmd,
switch (cmd) {
case TWL4030_MADC_IOCX_ADC_RAW_READ: {
+#if 0
struct twl4030_madc_request req;
if (par.channel >= TWL4030_MADC_MAX_CHANNELS)
return -EINVAL;
@@ -151,6 +152,9 @@ static long twl4030_madc_ioctl(struct file *filp, unsigned int cmd,
} else {
par.status = val;
}
+#else
+ panic("no raw readings from adc");
+#endif
break;
}
default:
@@ -1647,6 +1647,12 @@ fail:
printk(KERN_ERR "Bluetooth device registration failed\n");
}
+void __init rx51_spi_init(void)
+{
+ spi_register_board_info(rx51_peripherals_spi_board_info,
+ ARRAY_SIZE(rx51_peripherals_spi_board_info));
+}
+
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
@@ -1664,8 +1670,7 @@ void __init rx51_peripherals_init(void)
rx51_cmt_init();
rx51_ssi_init();
rx51_bt_init();
- spi_register_board_info(rx51_peripherals_spi_board_info,
- ARRAY_SIZE(rx51_peripherals_spi_board_info));
+ rx51_spi_init();
partition = omap_mux_get("core");
if (partition)
@@ -68,7 +68,7 @@ static struct omap_dss_board_info rx51_dss_board_info = {
static int __init rx51_video_init(void)
{
- if (!machine_is_nokia_rx51())
+ if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
return 0;
if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
@@ -33,9 +33,12 @@
#include "pm.h"
#include "sdram-nokia.h"
#include "board-rx51-secure.h"
+#include "soc.h"
#define RX51_GPIO_SLEEP_IND 162
+/* This lights up left part of keyboard */
+
static struct gpio_led gpio_leds[] = {
{
.name = "sleep_ind",
@@ -107,9 +110,11 @@ static void __init rx51_init(void)
rx51_camera_init();
#ifdef CONFIG_ARM_ERRATA_430973
- printk(KERN_INFO "RX-51: Enabling ARM errata 430973 workaround.\n");
- /* set IBE to 1 */
- rx51_secure_update_aux_cr(1 << 6, 0);
+ if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+ printk(KERN_INFO "RX-51: Enabling ARM errata 430973 workaround.\n");
+ /* set IBE to 1 */
+ rx51_secure_update_aux_cr(1 << 6, 0);
+ }
#endif
/* Ensure SDRC pins are mux'd for self-refresh */
@@ -124,6 +129,7 @@ static void __init rx51_reserve(void)
omap_reserve();
}
+#if 0
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
.atag_offset = 0x100,
@@ -137,3 +143,4 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
+#endif
@@ -39,6 +39,8 @@
#include "devices.h"
#include "dma.h"
+#define OF_DT 0
+
#define L3_MODULES_MAX_LEN 12
#define L3_MODULES 3
@@ -764,7 +766,7 @@ static inline void omap_init_ocp2scp(void) { }
static int __init omap2_init_devices(void)
{
/* Enable dummy states for those platforms without pinctrl support */
- if (!of_have_populated_dt())
+ if (!OF_DT)
pinctrl_provide_dummies();
/*
@@ -194,6 +194,7 @@ static int __init sdi_init_display(struct omap_dss_device *dssdev)
if (IS_ERR(vdds_sdi)) {
DSSERR("can't get VDDS_SDI regulator\n");
return PTR_ERR(vdds_sdi);
+// return 0;
}
sdi.vdds_sdi_reg = vdds_sdi;
@@ -757,11 +757,24 @@ static int __init ignore_loglevel_setup(char *str)
return 0;
}
+bool __read_mostly early_print_redirect;
+
+static int __init early_print_setup(char *str)
+{
+ early_print_redirect = 1;
+ early_printk("copying printk to early_printk\n");
+
+ return 0;
+}
+
+
early_param("ignore_loglevel", ignore_loglevel_setup);
module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ignore_loglevel, "ignore loglevel setting, to"
"print all kernel messages to the console.");
+early_param("early_print", early_print_setup);
+
#ifdef CONFIG_BOOT_PRINTK_DELAY
static int boot_delay; /* msecs delay after each printk during bootup */
@@ -1265,6 +1278,12 @@ static void call_console_drivers(int level, const char *text, size_t len)
{
struct console *con;
+ if (early_print_redirect) {
+ int i;
+ for (i=0; i<len; i++)
+ early_printk("%c", text[i]);
+ }
+
trace_console(text, 0, len, len);
if (level >= console_loglevel && !ignore_loglevel)
@@ -396,8 +396,10 @@ static int rx51_soc_probe(struct platform_device *pdev)
struct snd_soc_card *card = &rx51_sound_card;
int err;
- if (!machine_is_nokia_rx51())
+ if (!of_machine_is_compatible("nokia,omap3-n900")) {
+ printk("FIXME: rx51_soc_probe on non-nokia\n");
return -ENODEV;
+ }
err = gpio_request_one(RX51_TVOUT_SEL_GPIO,
GPIOF_DIR_OUT | GPIOF_INIT_LOW, "tvout_sel");
Hi! After major fight, I ended up with patch that can be posted to the mailing list without major risk, and where video still works on emulator & real hardware... So... here it is. One hack that is still neccessary is old-style spi init. Without that, I get display on emulator, but not on actual hardware. Bad. Ideas welcome. Oh and this all is with very reduced .config. Not for merge, but Signed-off-by: Pavel Machek <pavel@ucw.cz> Enjoy :-), Pavel