| Message ID | 20150409225600.GA17542@kahuna (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Nishanth Menon <nm@ti.com> [150409 15:57]: > On 17:33-20150409, Nishanth Menon wrote: > > BeagleBoard-X15 pre-production change includes switching over to UART > > pins that now allow for UART download capability. All original boards > > should either have been returned for modifications or already modified > > for the required change and maintaining compatibility for older boards > > are no longer needed. > > > > Signed-off-by: Nishanth Menon <nm@ti.com> > > --- > > arch/arm/boot/dts/am57xx-beagle-x15.dts | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts > > index 15f198e4864d..cea3be3a051c 100644 > > --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts > > +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts > > @@ -130,8 +130,8 @@ > > > > uart3_pins_default: uart3_pins_default { > > pinctrl-single,pins = < > > - 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ > > - 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ > > + 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ > > + 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ > > >; > > }; > > > > -- > > 1.7.9.5 > > > > Drat!.. I missed the daisychain merge that took place :( updated V2 patch > below. Do let me know if you'd like me to repost this. No need to repost, applying both into omap-for-v4.1/fixes thanks. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 15f198e4864d..01661e9013fe 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -130,8 +130,8 @@ uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ - 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ + 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ + 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ >; }; @@ -478,7 +478,7 @@ &uart3 { status = "okay"; interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x248>; + <&dra7_pmx_core 0x3f8>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins_default>;