diff mbox

[v4,4/9] usb: dwc3: core: Adapt to named interrupts

Message ID 20150902143457.GF8299@saruman.tx.rr.com (mailing list archive)
State New, archived
Headers show

Commit Message

Felipe Balbi Sept. 2, 2015, 2:34 p.m. UTC
On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
> From: Felipe Balbi <balbi@ti.com>
> 
> Add support to use interrupt names,
> 
> Following are the interrupt names
> 
> Peripheral Interrupt - peripheral
> HOST Interrupt - host
> OTG Interrupt - otg
> 
> [Roger Q]
> - If any of these are missing we use the
> first available IRQ resource so that we don't
> break with older DTBs.

this is what original commit did:

commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
Author: Felipe Balbi <balbi@ti.com>
Date:   Fri Jan 3 13:49:38 2014 -0600

    usb: dwc3: cleanup IRQ resources
    
    In order to make it easier for the driver to
    figure out which modes of operation it has,
    and because some dwc3 integrations have rather
    fuzzy IRQ routing, we now require three different
    IRQ numbers (peripheral, host, otg).
    
    In order to do that and maintain backwards compatibility,
    we still maintain support for the old IRQ resource name,
    but if you *really* want to have proper peripheral/host/otg
    support, you should make sure your resources are correct.
    
    Signed-off-by: Felipe Balbi <balbi@ti.com>


> 
> - Use gadget_irq in gadget driver.
> 
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  drivers/usb/dwc3/core.c   | 12 ++++++++++++
>  drivers/usb/dwc3/core.h   |  7 +++++++
>  drivers/usb/dwc3/gadget.c |  2 +-
>  3 files changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 2e36a9b..38b31df 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -958,6 +958,18 @@ static int dwc3_probe(struct platform_device *pdev)
>  	dwc->xhci_resources[1].flags = res->flags;
>  	dwc->xhci_resources[1].name = res->name;
>  
> +	dwc->otg_irq = platform_get_irq_byname(pdev, "otg");
> +	if (dwc->otg_irq < 0)
> +		dwc->otg_irq = res->start;
> +
> +	dwc->gadget_irq = platform_get_irq_byname(pdev, "peripheral");
> +	if (dwc->gadget_irq < 0)
> +		dwc->gadget_irq = res->start;
> +
> +	dwc->xhci_irq = platform_get_irq_byname(pdev, "host");
> +	if (dwc->xhci_irq < 0)
> +		dwc->xhci_irq = res->start;
> +
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	if (!res) {
>  		dev_err(dev, "missing memory resource\n");
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 4b85330..bd32cb2 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -742,6 +742,9 @@ struct dwc3_scratchpad_array {
>   * @maximum_speed: maximum speed requested (mainly for testing purposes)
>   * @revision: revision register contents
>   * @dr_mode: requested mode of operation
> + * @xhci_irq: IRQ number for XHCI IRQs
> + * @gadget_irq: IRQ number for Peripheral IRQs
> + * @otg_irq: IRQ number for OTG IRQs
>   * @usb2_phy: pointer to USB2 PHY
>   * @usb3_phy: pointer to USB3 PHY
>   * @usb2_generic_phy: pointer to USB2 PHY
> @@ -847,6 +850,10 @@ struct dwc3 {
>  
>  	enum usb_dr_mode	dr_mode;
>  
> +	int			gadget_irq;
> +	int			xhci_irq;
> +	int			otg_irq;
> +
>  	/* used for suspend/resume */
>  	u32			dcfg;
>  	u32			gctl;
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 0c25704..1148ec8 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1533,7 +1533,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
>  	int			irq;
>  	u32			reg;
>  
> -	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> +	irq = dwc->gadget_irq;
>  	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
>  			IRQF_SHARED, "dwc3", dwc);
>  	if (ret) {
> -- 
> 2.1.4
>

Comments

Roger Quadros Sept. 3, 2015, 12:46 p.m. UTC | #1
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On 02/09/15 17:34, Felipe Balbi wrote:
> On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
>> From: Felipe Balbi <balbi@ti.com>
>>
>> Add support to use interrupt names,
>>
>> Following are the interrupt names
>>
>> Peripheral Interrupt - peripheral
>> HOST Interrupt - host
>> OTG Interrupt - otg
>>
>> [Roger Q]
>> - If any of these are missing we use the
>> first available IRQ resource so that we don't
>> break with older DTBs.
> 
> this is what original commit did:
> 
> commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
> Author: Felipe Balbi <balbi@ti.com>
> Date:   Fri Jan 3 13:49:38 2014 -0600
> 
>     usb: dwc3: cleanup IRQ resources
>     
>     In order to make it easier for the driver to
>     figure out which modes of operation it has,
>     and because some dwc3 integrations have rather
>     fuzzy IRQ routing, we now require three different
>     IRQ numbers (peripheral, host, otg).
>     
>     In order to do that and maintain backwards compatibility,
>     we still maintain support for the old IRQ resource name,
>     but if you *really* want to have proper peripheral/host/otg
>     support, you should make sure your resources are correct.
>     
>     Signed-off-by: Felipe Balbi <balbi@ti.com>

This is better since we request the resource only if needed and bail out
if it is not present.

> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 60580a01cdd2..1f01031873b7 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -556,10 +556,22 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
>  static int dwc3_core_init_mode(struct dwc3 *dwc)
>  {
>  	struct device *dev = dwc->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
>  	int ret;
>  
>  	switch (dwc->dr_mode) {
>  	case USB_DR_MODE_PERIPHERAL:
> +		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");

Shall we just name it just "peripheral"?

> +		if (dwc->gadget_irq < 0) {
> +			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");

How will this work? Currently we don't have a name for the IRQ in the DT.

> +			if (dwc->gadget_irq < 0) {
> +				dev_err(dev, "missing IRQ\n");
> +				return dwc->gadget_irq;
> +			} else {
> +				dev_warn(dev, "dwc_usb3 resource is deprecated\n");

Do we want to warn about legacy nodes?

> +			}
> +		}
> +
>  		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
>  		ret = dwc3_gadget_init(dwc);
>  		if (ret) {
> @@ -568,6 +580,22 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>  		}
>  		break;
>  	case USB_DR_MODE_HOST:
> +		dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
> +		if (dwc->xhci_irq < 0) {
> +			dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> +			if (dwc->xhci_irq < 0) {
> +				dev_err(dev, "missing Host IRQ\n");
> +				return dwc->xhci_irq;
> +			} else {
> +				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> +			}
> +
> +			dwc->xhci_resources[1].start = dwc->xhci_irq;
> +			dwc->xhci_resources[1].end = dwc->xhci_irq;
> +			dwc->xhci_resources[1].flags = IORESOURCE_IRQ;
> +			dwc->xhci_resources[1].name = "xhci";
> +		}
> +
>  		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
>  		ret = dwc3_host_init(dwc);
>  		if (ret) {
> @@ -576,6 +604,28 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>  		}
>  		break;
>  	case USB_DR_MODE_OTG:
> +		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
> +		if (dwc->gadget_irq < 0) {
> +			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> +			if (dwc->gadget_irq < 0) {
> +				dev_err(dev, "missing IRQ\n");
> +				return dwc->gadget_irq;
> +			} else {
> +				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> +			}
> +
> +			dwc->xhci_irq = dwc->gadget_irq;
> +			dwc->otg_irq = dwc->gadget_irq;
> +		} else {
> +			dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
> +			if (dwc->xhci_irq < 0) {
> +				dev_err(dev, "missing Host IRQ\n");
> +				return dwc->xhci_irq;
> +			}
> +
> +			dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");

need to check if error?

> +		}

Need to setup xhci_resource[1]?

> +
>  		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
>  		ret = dwc3_otg_init(dwc);
>  		if (ret) {
> @@ -647,18 +697,6 @@ static int dwc3_probe(struct platform_device *pdev)
>  	dwc->mem = mem;
>  	dwc->dev = dev;
>  
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (!res) {
> -		dev_err(dev, "missing IRQ\n");
> -		return -ENODEV;
> -	}
> -	dwc->xhci_resources[1].start = res->start;
> -	dwc->xhci_resources[1].end = res->end;
> -	dwc->xhci_resources[1].flags = res->flags;
> -	dwc->xhci_resources[1].name = res->name;
> -
> -	dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
> -
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	if (!res) {
>  		dev_err(dev, "missing memory resource\n");
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 8e2e579b4b1e..0b02186fad6f 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -671,6 +671,8 @@ struct dwc3_scratchpad_array {
>   * @maximum_speed: maximum speed requested (mainly for testing purposes)
>   * @revision: revision register contents
>   * @dr_mode: requested mode of operation
> + * @gadget_irq: IRQ number for Peripheral IRQs
> + * @xhci_irq: IRQ number for Host IRQs
>   * @otg_irq: IRQ number for OTG IRQs
>   * @usb2_phy: pointer to USB2 PHY
>   * @usb3_phy: pointer to USB3 PHY
> @@ -747,6 +749,8 @@ struct dwc3 {
>  
>  	enum usb_dr_mode	dr_mode;
>  
> +	int			gadget_irq;
> +	int			xhci_irq;
>  	int			otg_irq;
>  
>  	/* used for suspend/resume */
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index a8cf87b3de01..2a6e5155fc89 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1567,15 +1567,13 @@ static int dwc3_gadget_start(struct usb_gadget *g,
>  	struct dwc3_ep		*dep;
>  	unsigned long		flags;
>  	int			ret = 0;
> -	int			irq;
>  	u32			reg;
>  
> -	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> -	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
> -			IRQF_SHARED, "dwc3", dwc);
> +	ret = request_threaded_irq(dwc->gadget_irq, dwc3_interrupt,
> +			dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc);
>  	if (ret) {
>  		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
> -				irq, ret);
> +				dwc->gadget_irq, ret);
>  		goto err0;
>  	}
>  
> @@ -1668,7 +1666,7 @@ err2:
>  err1:
>  	spin_unlock_irqrestore(&dwc->lock, flags);
>  
> -	free_irq(irq, dwc);
> +	free_irq(dwc->gadget_irq, dwc);
>  
>  err0:
>  	return ret;
> @@ -1679,7 +1677,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
>  {
>  	struct dwc3		*dwc = gadget_to_dwc(g);
>  	unsigned long		flags;
> -	int			irq;
>  
>  	spin_lock_irqsave(&dwc->lock, flags);
>  
> @@ -1691,8 +1688,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
>  
>  	spin_unlock_irqrestore(&dwc->lock, flags);
>  
> -	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> -	free_irq(irq, dwc);
> +	free_irq(dwc->gadget_irq, dwc);
>  
>  	return 0;
>  }
> 

- --
cheers,
- -roger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
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=M0TG
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Felipe Balbi Sept. 3, 2015, 3:48 p.m. UTC | #2
Hi,

On Thu, Sep 03, 2015 at 03:46:43PM +0300, Roger Quadros wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
> 
> On 02/09/15 17:34, Felipe Balbi wrote:
> > On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
> >> From: Felipe Balbi <balbi@ti.com>
> >>
> >> Add support to use interrupt names,
> >>
> >> Following are the interrupt names
> >>
> >> Peripheral Interrupt - peripheral
> >> HOST Interrupt - host
> >> OTG Interrupt - otg
> >>
> >> [Roger Q]
> >> - If any of these are missing we use the
> >> first available IRQ resource so that we don't
> >> break with older DTBs.
> > 
> > this is what original commit did:
> > 
> > commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
> > Author: Felipe Balbi <balbi@ti.com>
> > Date:   Fri Jan 3 13:49:38 2014 -0600
> > 
> >     usb: dwc3: cleanup IRQ resources
> >     
> >     In order to make it easier for the driver to
> >     figure out which modes of operation it has,
> >     and because some dwc3 integrations have rather
> >     fuzzy IRQ routing, we now require three different
> >     IRQ numbers (peripheral, host, otg).
> >     
> >     In order to do that and maintain backwards compatibility,
> >     we still maintain support for the old IRQ resource name,
> >     but if you *really* want to have proper peripheral/host/otg
> >     support, you should make sure your resources are correct.
> >     
> >     Signed-off-by: Felipe Balbi <balbi@ti.com>
> 
> This is better since we request the resource only if needed and bail out
> if it is not present.
> 
> > 
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 60580a01cdd2..1f01031873b7 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -556,10 +556,22 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> >  static int dwc3_core_init_mode(struct dwc3 *dwc)
> >  {
> >  	struct device *dev = dwc->dev;
> > +	struct platform_device *pdev = to_platform_device(dev);
> >  	int ret;
> >  
> >  	switch (dwc->dr_mode) {
> >  	case USB_DR_MODE_PERIPHERAL:
> > +		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
> 
> Shall we just name it just "peripheral"?

sure, why not :-)

> > +		if (dwc->gadget_irq < 0) {
> > +			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> 
> How will this work? Currently we don't have a name for the IRQ in the DT.

we can just add interrupt-names, right ? Or, the fallback could be what
is already done today: just fetch it by index.

> 
> > +			if (dwc->gadget_irq < 0) {
> > +				dev_err(dev, "missing IRQ\n");
> > +				return dwc->gadget_irq;
> > +			} else {
> > +				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> 
> Do we want to warn about legacy nodes?

Sure :-)

Now, do you want me to update it, or will you do it ? BTW, if you decide
to do it, we need to patch all users :-)

> > @@ -576,6 +604,28 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> >  		}
> >  		break;
> >  	case USB_DR_MODE_OTG:
> > +		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
> > +		if (dwc->gadget_irq < 0) {
> > +			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
> > +			if (dwc->gadget_irq < 0) {
> > +				dev_err(dev, "missing IRQ\n");
> > +				return dwc->gadget_irq;
> > +			} else {
> > +				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
> > +			}
> > +
> > +			dwc->xhci_irq = dwc->gadget_irq;
> > +			dwc->otg_irq = dwc->gadget_irq;
> > +		} else {
> > +			dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
> > +			if (dwc->xhci_irq < 0) {
> > +				dev_err(dev, "missing Host IRQ\n");
> > +				return dwc->xhci_irq;
> > +			}
> > +
> > +			dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
> 
> need to check if error?

right

> > +		}
> 
> Need to setup xhci_resource[1]?

isn't it done above ?
Roger Quadros Sept. 4, 2015, 9:11 a.m. UTC | #3
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Hi,

On 03/09/15 18:48, Felipe Balbi wrote:
> Hi,
> 
> On Thu, Sep 03, 2015 at 03:46:43PM +0300, Roger Quadros wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA256
>>
>> On 02/09/15 17:34, Felipe Balbi wrote:
>>> On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
>>>> From: Felipe Balbi <balbi@ti.com>
>>>>
>>>> Add support to use interrupt names,
>>>>
>>>> Following are the interrupt names
>>>>
>>>> Peripheral Interrupt - peripheral
>>>> HOST Interrupt - host
>>>> OTG Interrupt - otg
>>>>
>>>> [Roger Q]
>>>> - If any of these are missing we use the
>>>> first available IRQ resource so that we don't
>>>> break with older DTBs.
>>>
>>> this is what original commit did:
>>>
>>> commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
>>> Author: Felipe Balbi <balbi@ti.com>
>>> Date:   Fri Jan 3 13:49:38 2014 -0600
>>>
>>>     usb: dwc3: cleanup IRQ resources
>>>     
>>>     In order to make it easier for the driver to
>>>     figure out which modes of operation it has,
>>>     and because some dwc3 integrations have rather
>>>     fuzzy IRQ routing, we now require three different
>>>     IRQ numbers (peripheral, host, otg).
>>>     
>>>     In order to do that and maintain backwards compatibility,
>>>     we still maintain support for the old IRQ resource name,
>>>     but if you *really* want to have proper peripheral/host/otg
>>>     support, you should make sure your resources are correct.
>>>     
>>>     Signed-off-by: Felipe Balbi <balbi@ti.com>
>>
>> This is better since we request the resource only if needed and bail out
>> if it is not present.
>>
>>>
>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>> index 60580a01cdd2..1f01031873b7 100644
>>> --- a/drivers/usb/dwc3/core.c
>>> +++ b/drivers/usb/dwc3/core.c
>>> @@ -556,10 +556,22 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
>>>  static int dwc3_core_init_mode(struct dwc3 *dwc)
>>>  {
>>>  	struct device *dev = dwc->dev;
>>> +	struct platform_device *pdev = to_platform_device(dev);
>>>  	int ret;
>>>  
>>>  	switch (dwc->dr_mode) {
>>>  	case USB_DR_MODE_PERIPHERAL:
>>> +		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
>>
>> Shall we just name it just "peripheral"?
> 
> sure, why not :-)
> 
>>> +		if (dwc->gadget_irq < 0) {
>>> +			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
>>
>> How will this work? Currently we don't have a name for the IRQ in the DT.
> 
> we can just add interrupt-names, right ? Or, the fallback could be what
> is already done today: just fetch it by index.
> 
>>
>>> +			if (dwc->gadget_irq < 0) {
>>> +				dev_err(dev, "missing IRQ\n");
>>> +				return dwc->gadget_irq;
>>> +			} else {
>>> +				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
>>
>> Do we want to warn about legacy nodes?
> 
> Sure :-)
> 
> Now, do you want me to update it, or will you do it ? BTW, if you decide
> to do it, we need to patch all users :-)

Would appreciate if you can do it. It is independent of dual-role support and can go in early.
BTW omap users are already using the named interrupt property.

> 
>>> @@ -576,6 +604,28 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>>>  		}
>>>  		break;
>>>  	case USB_DR_MODE_OTG:
>>> +		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
>>> +		if (dwc->gadget_irq < 0) {
>>> +			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
>>> +			if (dwc->gadget_irq < 0) {
>>> +				dev_err(dev, "missing IRQ\n");
>>> +				return dwc->gadget_irq;
>>> +			} else {
>>> +				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
>>> +			}
>>> +
>>> +			dwc->xhci_irq = dwc->gadget_irq;
>>> +			dwc->otg_irq = dwc->gadget_irq;
>>> +		} else {
>>> +			dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
>>> +			if (dwc->xhci_irq < 0) {
>>> +				dev_err(dev, "missing Host IRQ\n");
>>> +				return dwc->xhci_irq;
>>> +			}
>>> +
>>> +			dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
>>
>> need to check if error?
> 
> right
> 
>>> +		}
>>
>> Need to setup xhci_resource[1]?
> 
> isn't it done above ?
> 

It is done in the USB_DR_MODE_HOST case, but that won't be executed for USB_DR_MODE_OTG case, no?
I'm talking about this part

+			dwc->xhci_resources[1].start = dwc->xhci_irq;
+			dwc->xhci_resources[1].end = dwc->xhci_irq;
+			dwc->xhci_resources[1].flags = IORESOURCE_IRQ;
+			dwc->xhci_resources[1].name = "xhci";

cheers,
- -roger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
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=fDSz
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 60580a01cdd2..1f01031873b7 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -556,10 +556,22 @@  static int dwc3_core_get_phy(struct dwc3 *dwc)
 static int dwc3_core_init_mode(struct dwc3 *dwc)
 {
 	struct device *dev = dwc->dev;
+	struct platform_device *pdev = to_platform_device(dev);
 	int ret;
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
+		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
+		if (dwc->gadget_irq < 0) {
+			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
+			if (dwc->gadget_irq < 0) {
+				dev_err(dev, "missing IRQ\n");
+				return dwc->gadget_irq;
+			} else {
+				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
+			}
+		}
+
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
@@ -568,6 +580,22 @@  static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_HOST:
+		dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
+		if (dwc->xhci_irq < 0) {
+			dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc_usb3");
+			if (dwc->xhci_irq < 0) {
+				dev_err(dev, "missing Host IRQ\n");
+				return dwc->xhci_irq;
+			} else {
+				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
+			}
+
+			dwc->xhci_resources[1].start = dwc->xhci_irq;
+			dwc->xhci_resources[1].end = dwc->xhci_irq;
+			dwc->xhci_resources[1].flags = IORESOURCE_IRQ;
+			dwc->xhci_resources[1].name = "xhci";
+		}
+
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
@@ -576,6 +604,28 @@  static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_OTG:
+		dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
+		if (dwc->gadget_irq < 0) {
+			dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
+			if (dwc->gadget_irq < 0) {
+				dev_err(dev, "missing IRQ\n");
+				return dwc->gadget_irq;
+			} else {
+				dev_warn(dev, "dwc_usb3 resource is deprecated\n");
+			}
+
+			dwc->xhci_irq = dwc->gadget_irq;
+			dwc->otg_irq = dwc->gadget_irq;
+		} else {
+			dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
+			if (dwc->xhci_irq < 0) {
+				dev_err(dev, "missing Host IRQ\n");
+				return dwc->xhci_irq;
+			}
+
+			dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
+		}
+
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
 		ret = dwc3_otg_init(dwc);
 		if (ret) {
@@ -647,18 +697,6 @@  static int dwc3_probe(struct platform_device *pdev)
 	dwc->mem = mem;
 	dwc->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(dev, "missing IRQ\n");
-		return -ENODEV;
-	}
-	dwc->xhci_resources[1].start = res->start;
-	dwc->xhci_resources[1].end = res->end;
-	dwc->xhci_resources[1].flags = res->flags;
-	dwc->xhci_resources[1].name = res->name;
-
-	dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "missing memory resource\n");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 8e2e579b4b1e..0b02186fad6f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -671,6 +671,8 @@  struct dwc3_scratchpad_array {
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
  * @revision: revision register contents
  * @dr_mode: requested mode of operation
+ * @gadget_irq: IRQ number for Peripheral IRQs
+ * @xhci_irq: IRQ number for Host IRQs
  * @otg_irq: IRQ number for OTG IRQs
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
@@ -747,6 +749,8 @@  struct dwc3 {
 
 	enum usb_dr_mode	dr_mode;
 
+	int			gadget_irq;
+	int			xhci_irq;
 	int			otg_irq;
 
 	/* used for suspend/resume */
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a8cf87b3de01..2a6e5155fc89 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1567,15 +1567,13 @@  static int dwc3_gadget_start(struct usb_gadget *g,
 	struct dwc3_ep		*dep;
 	unsigned long		flags;
 	int			ret = 0;
-	int			irq;
 	u32			reg;
 
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
-			IRQF_SHARED, "dwc3", dwc);
+	ret = request_threaded_irq(dwc->gadget_irq, dwc3_interrupt,
+			dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc);
 	if (ret) {
 		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
-				irq, ret);
+				dwc->gadget_irq, ret);
 		goto err0;
 	}
 
@@ -1668,7 +1666,7 @@  err2:
 err1:
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
-	free_irq(irq, dwc);
+	free_irq(dwc->gadget_irq, dwc);
 
 err0:
 	return ret;
@@ -1679,7 +1677,6 @@  static int dwc3_gadget_stop(struct usb_gadget *g,
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
 	unsigned long		flags;
-	int			irq;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
@@ -1691,8 +1688,7 @@  static int dwc3_gadget_stop(struct usb_gadget *g,
 
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-	free_irq(irq, dwc);
+	free_irq(dwc->gadget_irq, dwc);
 
 	return 0;
 }