From patchwork Fri Sep 2 09:06:00 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nishanth Menon X-Patchwork-Id: 9310607 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 5513260756 for ; Fri, 2 Sep 2016 09:06:55 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 40E6F296D2 for ; Fri, 2 Sep 2016 09:06:55 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 3458129727; Fri, 2 Sep 2016 09:06:55 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E9C91296D2 for ; Fri, 2 Sep 2016 09:06:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752927AbcIBJGi (ORCPT ); Fri, 2 Sep 2016 05:06:38 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:51464 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752812AbcIBJGd (ORCPT ); Fri, 2 Sep 2016 05:06:33 -0400 Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by comal.ext.ti.com (8.13.7/8.13.7) with ESMTP id u829634Q011051; Fri, 2 Sep 2016 04:06:03 -0500 Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id u82962Zx025687; Fri, 2 Sep 2016 04:06:02 -0500 Received: from dlep32.itg.ti.com (157.170.170.100) by DFLE72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.3.294.0; Fri, 2 Sep 2016 04:06:01 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by dlep32.itg.ti.com (8.14.3/8.13.8) with ESMTP id u82961sM001536; Fri, 2 Sep 2016 04:06:01 -0500 From: Nishanth Menon To: Tony Lindgren CC: Tomi Valkeinen , Kishon Vijay Abraham I , , , , , Nishanth Menon Subject: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1 Date: Fri, 2 Sep 2016 04:06:00 -0500 Message-ID: <20160902090600.27262-3-nm@ti.com> X-Mailer: git-send-email 2.9.1.200.gb1ec08f In-Reply-To: <20160902090600.27262-1-nm@ti.com> References: <20160902090600.27262-1-nm@ti.com> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Latest update to the BeagleBoard-X15 platform (revision B1)[1] updates for allowing UHS SD cards to function with the split of supply to SD card from a dedicated LDO. As a result of this, AM57xx BeagleBoard-X15 now uses gpio2_30 instead of gpio6_28 for HDMI because HDMI_LS_OE should now be switched from GPIO6_28(Y9) to GPIO2_30 (AG8) to avoid a 1.8V GPIO toggling a 3.3V SoC input when the SD card is in UHS 1.8V mode. NOTE: For UHS mode to function, we need full fledged IODelay support in kernel to be functional. IODelay support is yet to be added. Further, It does not make much sense to spin off a new board compatible flag since there is no real functional benefit for the same. Note: Even though production version is supposed to be B1, there is over ~200 boards of previous version (A2)[2] out there which continue to get supported with the existing dts file and the production board is now supported as revb1 [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BEAGLEBOARD_X15_REV_B1.pdf [2] http://marc.info/?l=linux-arm-kernel&m=147273929820708&w=2 Signed-off-by: Nishanth Menon Tested-by: Tomi Valkeinen --- NOTE: even though I have used -C -M option with git-format-patch, the diff for x15.dts might look a little weird. we could alternatively split the patch into two by creating a common dtsi and then introducing revb1 -> but, at least for the moment, I felt it to be an overkill. Also, please note that even though revb1 is the production platform, there are sufficient quantities of x15 A2s (pre-prod) in the wild currently to leave existing dts in sync with A2 and introduce b1 as a seperate dts (instead of the other way around). arch/arm/boot/dts/Makefile | 1 + ...eagle-x15.dts => am57xx-beagle-x15-common.dtsi} | 8 +- arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts | 24 + arch/arm/boot/dts/am57xx-beagle-x15.dts | 592 +-------------------- 4 files changed, 33 insertions(+), 592 deletions(-) copy arch/arm/boot/dts/{am57xx-beagle-x15.dts => am57xx-beagle-x15-common.dtsi} (97%) create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faacd52370d2..b8d9840895c2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -570,6 +570,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ + am57xx-beagle-x15-revb1.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi similarity index 97% copy from arch/arm/boot/dts/am57xx-beagle-x15.dts copy to arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index ef21da558ea3..ec85ff9004e8 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,7 +13,6 @@ #include / { - model = "TI AM5728 BeagleBoard-X15"; compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; aliases { @@ -114,10 +113,6 @@ tpd12s015: encoder { compatible = "ti,tpd12s015"; - gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ - <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ - <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ - ports { #address-cells = <1>; #size-cells = <0>; @@ -448,7 +443,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; - vmmc-supply = <&ldo1_reg>; bus-width = <4>; cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts new file mode 100644 index 000000000000..da61dbba7768 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-beagle-x15-common.dtsi" + +/ { + model = "TI AM5728 BeagleBoard-X15 rev B1"; +}; + +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio6_30, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ +}; + +&mmc1 { + vmmc-supply = <&vdd_3v3>; + vmmc-aux-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index ef21da558ea3..b47ac4bbfde6 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -1,602 +1,24 @@ /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/dts-v1/; -#include "dra74x.dtsi" -#include "am57xx-commercial-grade.dtsi" -#include -#include +#include "am57xx-beagle-x15-common.dtsi" / { model = "TI AM5728 BeagleBoard-X15"; - compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - aliases { - rtc0 = &mcp_rtc; - rtc1 = &tps659038_rtc; - rtc2 = &rtc; - display0 = &hdmi0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x80000000>; - }; - - vdd_3v3: fixedregulator-vdd_3v3 { - compatible = "regulator-fixed"; - regulator-name = "vdd_3v3"; - vin-supply = <®en1>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - aic_dvdd: fixedregulator-aic_dvdd { - compatible = "regulator-fixed"; - regulator-name = "aic_dvdd_fixed"; - vin-supply = <&vdd_3v3>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vtt_fixed: fixedregulator-vtt { - /* TPS51200 */ - compatible = "regulator-fixed"; - regulator-name = "vtt_fixed"; - vin-supply = <&smps3_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - - led0 { - label = "beagle-x15:usr0"; - gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led1 { - label = "beagle-x15:usr1"; - gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "cpu0"; - default-state = "off"; - }; - - led2 { - label = "beagle-x15:usr2"; - gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led3 { - label = "beagle-x15:usr3"; - gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - default-state = "off"; - }; - }; - - gpio_fan: gpio_fan { - /* Based on 5v 500mA AFB02505HHB */ - compatible = "gpio-fan"; - gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0>, - <13000 1>; - #cooling-cells = <2>; - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; - - tpd12s015: encoder { - compatible = "ti,tpd12s015"; - - gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ - <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ - <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - sound0: sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "BeagleBoard-X15"; - simple-audio-card,widgets = - "Line", "Line Out", - "Line", "Line In"; - simple-audio-card,routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "MIC2L", "Line In", - "MIC2R", "Line In"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound0_master>; - simple-audio-card,frame-master = <&sound0_master>; - simple-audio-card,bitclock-inversion; - - simple-audio-card,cpu { - sound-dai = <&mcasp3>; - }; - - sound0_master: simple-audio-card,codec { - sound-dai = <&tlv320aic3104>; - clocks = <&clkout2_clk>; - }; - }; -}; - -&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; -}; -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - - tps659038: tps659038@58 { - compatible = "ti,tps659038"; - reg = <0x58>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - #interrupt-cells = <2>; - interrupt-controller; - - ti,system-power-controller; - - tps659038_pmic { - compatible = "ti,tps659038-pmic"; - - regulators { - smps12_reg: smps12 { - /* VDD_MPU */ - regulator-name = "smps12"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps3_reg: smps3 { - /* VDD_DDR */ - regulator-name = "smps3"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - smps45_reg: smps45 { - /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ - regulator-name = "smps45"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps6_reg: smps6 { - /* VDD_CORE */ - regulator-name = "smps6"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - - /* SMPS7 unused */ - - smps8_reg: smps8 { - /* VDD_1V8 */ - regulator-name = "smps8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - /* SMPS9 unused */ - - ldo1_reg: ldo1 { - /* VDD_SD / VDDSHV8 */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - /* VDD_SHV5 */ - regulator-name = "ldo2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHYA */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_1V8_PHYB */ - regulator-name = "ldo4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo9_reg: ldo9 { - /* VDD_RTC */ - regulator-name = "ldo9"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - regulator-boot-on; - }; - - ldoln_reg: ldoln { - /* VDDA_1V8_PLL */ - regulator-name = "ldoln"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldousb_reg: ldousb { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldousb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - regen1: regen1 { - /* VDD_3V3_ON */ - regulator-name = "regen1"; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - - tps659038_rtc: tps659038_rtc { - compatible = "ti,palmas-rtc"; - interrupt-parent = <&tps659038>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - - tps659038_pwr_button: tps659038_pwr_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps659038>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - ti,palmas-long-press-seconds = <12>; - }; - - tps659038_gpio: tps659038_gpio { - compatible = "ti,palmas-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - extcon_usb2: tps659038_usb { - compatible = "ti,palmas-usb-vid"; - ti,enable-vbus-detection; - vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - }; - - }; - - tmp102: tmp102@48 { - compatible = "ti,tmp102"; - reg = <0x48>; - interrupt-parent = <&gpio7>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; - }; - - tlv320aic3104: tlv320aic3104@18 { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3104"; - reg = <0x18>; - assigned-clocks = <&clkoutmux2_clk_mux>; - assigned-clock-parents = <&sys_clk2_dclk_div>; - - status = "okay"; - adc-settle-ms = <40>; - - AVDD-supply = <&vdd_3v3>; - IOVDD-supply = <&vdd_3v3>; - DRVDD-supply = <&vdd_3v3>; - DVDD-supply = <&aic_dvdd>; - }; - - eeprom: eeprom@50 { - compatible = "at,24c32"; - reg = <0x50>; - }; }; -&i2c3 { - status = "okay"; - clock-frequency = <400000>; - - mcp_rtc: rtc@6f { - compatible = "microchip,mcp7941x"; - reg = <0x6f>; - interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>, - <&dra7_pmx_core 0x424>; - interrupt-names = "irq", "wakeup"; - - vcc-supply = <&vdd_3v3>; - wakeup-source; - }; -}; - -&gpio7 { - ti,no-reset-on-init; - ti,no-idle-on-init; -}; - -&cpu0 { - cpu0-supply = <&smps12_reg>; - voltage-tolerance = <1>; -}; - -&uart3 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3f8>; -}; - -&mac { - status = "okay"; - dual_emac; -}; - -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <1>; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <2>; +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ }; &mmc1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ -}; - -&mmc2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - vmmc-supply = <&vdd_3v3>; - bus-width = <8>; - ti,non-removable; - cap-mmc-dual-data-rate; -}; - -&sata { - status = "okay"; -}; - -&usb2_phy1 { - phy-supply = <&ldousb_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldousb_reg>; -}; - -&usb1 { - dr_mode = "host"; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - -&usb2 { - /* - * Stand alone usage is peripheral only. - * However, with some resistor modifications - * this port can be used via expansion connectors - * as "host" or "dual-role". If so, provide - * the necessary dr_mode override in the expansion - * board's DT. - */ - dr_mode = "peripheral"; -}; - -&cpu_trips { - cpu_alert1: cpu_alert1 { - temperature = <50000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; -}; - -&cpu_cooling_maps { - map1 { - trip = <&cpu_alert1>; - cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; -}; - -&thermal_zones { - board_thermal: board_thermal { - polling-delay-passive = <1250>; /* milliseconds */ - polling-delay = <1500>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&tmp102 0>; - - board_trips: trips { - board_alert0: board_alert { - temperature = <40000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - board_crit: board_crit { - temperature = <105000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - board_cooling_maps: cooling-maps { - map0 { - trip = <&board_alert0>; - cooling-device = - <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; - -&dss { - status = "ok"; - - vdda_video-supply = <&ldoln_reg>; -}; - -&hdmi { - status = "ok"; - vdda-supply = <&ldo4_reg>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; - -&pcie1 { - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&sys_clkin2>; - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; + vmmc-aux-supply = <&ldo1_reg>; };