new file mode 100644
@@ -0,0 +1,394 @@
+/*
+ * Low level suspend code for AM43XX SoCs
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Dave Gerlach, Vaibhav Bedia
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/ti-emif-sram.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/memory.h>
+
+#include "cm33xx.h"
+#include "common.h"
+#include "iomap.h"
+#include "omap-secure.h"
+#include "omap44xx.h"
+#include "prm33xx.h"
+#include "prcm43xx.h"
+
+#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
+#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
+#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002
+
+#define AM43XX_EMIF_POWEROFF_ENABLE 0x1
+#define AM43XX_EMIF_POWEROFF_DISABLE 0x0
+
+#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP 0x1
+#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO 0x3
+
+#define AM43XX_CM_BASE 0x44DF0000
+
+#define AM43XX_CM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM43XX_CM_BASE + (inst) + (reg))
+
+#define AM43XX_CM_MPU_CLKSTCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
+ AM43XX_CM_MPU_MPU_CDOFFS)
+#define AM43XX_CM_MPU_MPU_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
+ AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET)
+#define AM43XX_CM_PER_EMIF_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_PER_INST, \
+ AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+#define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030
+
+ .arm
+ .align 3
+
+ENTRY(am43xx_do_wfi)
+ stmfd sp!, {r4 - r11, lr} @ save registers on stack
+
+ /* Retrieve l2 cache virt address BEFORE we shut off EMIF */
+ ldr r1, get_l2cache_base
+ blx r1
+ mov r8, r0
+
+ /*
+ * Flush all data from the L1 and L2 data cache before disabling
+ * SCTLR.C bit.
+ */
+ ldr r1, kernel_flush
+ blx r1
+
+ /*
+ * Clear the SCTLR.C bit to prevent further data cache
+ * allocation. Clearing SCTLR.C would make all the data accesses
+ * strongly ordered and would not hit the cache.
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #(1 << 2) @ Disable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+ dsb
+
+ /*
+ * Invalidate L1 and L2 data cache.
+ */
+ ldr r1, kernel_flush
+ blx r1
+
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Clean and invalidate the L2 cache.
+ */
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x03
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ dsb
+ smc #0
+ dsb
+#endif
+ mov r0, r8
+ adr r4, am43xx_pm_ro_sram_data
+ ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
+
+ mov r2, r0
+ ldr r0, [r2, #L2X0_AUX_CTRL]
+ str r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
+ ldr r0, [r2, #L310_PREFETCH_CTRL]
+ str r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
+
+ ldr r0, l2_val
+ str r0, [r2, #L2X0_CLEAN_INV_WAY]
+wait:
+ ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
+ ldr r1, l2_val
+ ands r0, r0, r1
+ bne wait
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x00
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ dsb
+ smc #0
+ dsb
+#endif
+l2x_sync:
+ mov r0, r8
+ mov r2, r0
+ mov r0, #0x0
+ str r0, [r2, #L2X0_CACHE_SYNC]
+sync:
+ ldr r0, [r2, #L2X0_CACHE_SYNC]
+ ands r0, r0, #0x1
+ bne sync
+#endif
+
+ adr r9, am43xx_emif_sram_table
+
+ ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
+ blx r3
+
+ ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
+ blx r3
+
+ /* Disable EMIF */
+ ldr r1, am43xx_virt_emif_clkctrl
+ ldr r2, [r1]
+ bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+ str r2, [r1]
+
+wait_emif_disable:
+ ldr r2, [r1]
+ mov r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
+ cmp r2, r3
+ bne wait_emif_disable
+
+ /*
+ * For the MPU WFI to be registered as an interrupt
+ * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
+ * to DISABLED
+ */
+ ldr r1, am43xx_virt_mpu_clkctrl
+ ldr r2, [r1]
+ bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+ str r2, [r1]
+
+ /*
+ * Put MPU CLKDM to SW_SLEEP
+ */
+ ldr r1, am43xx_virt_mpu_clkstctrl
+ mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
+ str r2, [r1]
+
+ /*
+ * Execute a barrier instruction to ensure that all cache,
+ * TLB and branch predictor maintenance operations issued
+ * have completed.
+ */
+ dsb
+ dmb
+
+ /*
+ * Execute a WFI instruction and wait until the
+ * STANDBYWFI output is asserted to indicate that the
+ * CPU is in idle and low power state. CPU can specualatively
+ * prefetch the instructions so add NOPs after WFI. Sixteen
+ * NOPs as per Cortex-A9 pipeline.
+ */
+ wfi
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* We come here in case of an abort due to a late interrupt */
+ ldr r1, am43xx_virt_mpu_clkstctrl
+ mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
+ str r2, [r1]
+
+ /* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
+ ldr r1, am43xx_virt_mpu_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+
+ /* Re-enable EMIF */
+ ldr r1, am43xx_virt_emif_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+wait_emif_enable:
+ ldr r3, [r1]
+ cmp r2, r3
+ bne wait_emif_enable
+
+ /*
+ * Set SCTLR.C bit to allow data cache allocation
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ orr r0, r0, #(1 << 2) @ Enable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+
+ ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
+ blx r1
+
+ /* Let the suspend code know about the abort */
+ mov r0, #1
+ ldmfd sp!, {r4 - r11, pc} @ restore regs and return
+ENDPROC(am43xx_do_wfi)
+
+ .align
+ENTRY(am43xx_resume_offset)
+ .word . - am43xx_do_wfi
+
+ENTRY(am43xx_resume_from_deep_sleep)
+ /* Set MPU CLKSTCTRL to HW AUTO so that CPUidle works properly */
+ ldr r1, am43xx_virt_mpu_clkstctrl
+ mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
+ str r2, [r1]
+
+ /* For AM43xx, use EMIF power down until context is restored */
+ ldr r2, am43xx_phys_emif_poweroff
+ mov r1, #AM43XX_EMIF_POWEROFF_ENABLE
+ str r1, [r2, #0x0]
+
+ /* Re-enable EMIF */
+ ldr r1, am43xx_phys_emif_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+wait_emif_enable1:
+ ldr r3, [r1]
+ cmp r2, r3
+ bne wait_emif_enable1
+
+ adr r9, am43xx_emif_sram_table
+
+ ldr r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
+ blx r1
+
+ ldr r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
+ blx r1
+
+ ldr r2, am43xx_phys_emif_poweroff
+ mov r1, #AM43XX_EMIF_POWEROFF_DISABLE
+ str r1, [r2, #0x0]
+
+#ifdef CONFIG_CACHE_L2X0
+ ldr r2, l2_cache_base
+ ldr r0, [r2, #L2X0_CTRL]
+ and r0, #0x0f
+ cmp r0, #1
+ beq skip_l2en @ Skip if already enabled
+
+ adr r4, am43xx_pm_ro_sram_data
+ ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET]
+ ldr r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
+
+ ldr r12, l2_smc1
+ dsb
+ smc #0
+ dsb
+set_aux_ctrl:
+ ldr r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
+ ldr r12, l2_smc2
+ dsb
+ smc #0
+ dsb
+
+ /* L2 invalidate on resume */
+ ldr r0, l2_val
+ ldr r2, l2_cache_base
+ str r0, [r2, #L2X0_INV_WAY]
+wait2:
+ ldr r0, [r2, #L2X0_INV_WAY]
+ ldr r1, l2_val
+ ands r0, r0, r1
+ bne wait2
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x00
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ dsb
+ smc #0
+ dsb
+#endif
+l2x_sync2:
+ ldr r2, l2_cache_base
+ mov r0, #0x0
+ str r0, [r2, #L2X0_CACHE_SYNC]
+sync2:
+ ldr r0, [r2, #L2X0_CACHE_SYNC]
+ ands r0, r0, #0x1
+ bne sync2
+
+ mov r0, #0x1
+ ldr r12, l2_smc3
+ dsb
+ smc #0
+ dsb
+#endif
+skip_l2en:
+ /* We are back. Branch to the common CPU resume routine */
+ mov r0, #0
+ ldr pc, resume_addr
+ENDPROC(am43xx_resume_from_deep_sleep)
+
+/*
+ * Local variables
+ */
+ .align
+resume_addr:
+ .word cpu_resume - PAGE_OFFSET + 0x80000000
+get_l2cache_base:
+ .word omap4_get_l2cache_base
+kernel_flush:
+ .word v7_flush_dcache_all
+ddr_start:
+ .word PAGE_OFFSET
+
+am43xx_phys_emif_poweroff:
+ .word (AM43XX_CM_BASE + AM43XX_PRM_DEVICE_INST + \
+ AM43XX_PRM_EMIF_CTRL_OFFSET)
+am43xx_virt_mpu_clkstctrl:
+ .word (AM43XX_CM_MPU_CLKSTCTRL)
+am43xx_virt_mpu_clkctrl:
+ .word (AM43XX_CM_MPU_MPU_CLKCTRL)
+am43xx_virt_emif_clkctrl:
+ .word (AM43XX_CM_PER_EMIF_CLKCTRL)
+am43xx_phys_emif_clkctrl:
+ .word (AM43XX_CM_BASE + AM43XX_CM_PER_INST + \
+ AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+
+/* L2 cache related defines for AM437x */
+l2_cache_base:
+ .word OMAP44XX_L2CACHE_BASE
+l2_smc1:
+ .word OMAP4_MON_L2X0_PREFETCH_INDEX
+l2_smc2:
+ .word OMAP4_MON_L2X0_AUXCTRL_INDEX
+l2_smc3:
+ .word OMAP4_MON_L2X0_CTRL_INDEX
+l2_val:
+ .word 0xffff
+
+.align 3
+/* DDR related defines */
+ENTRY(am43xx_emif_sram_table)
+ .space EMIF_PM_FUNCTIONS_SIZE
+
+ENTRY(am43xx_pm_sram)
+.word am43xx_do_wfi
+.word am43xx_do_wfi_sz
+.word am43xx_resume_offset
+.word am43xx_emif_sram_table
+.word am43xx_pm_ro_sram_data
+
+.align 3
+
+ENTRY(am43xx_pm_ro_sram_data)
+ .space AMX3_PM_RO_SRAM_DATA_SIZE
+
+ENTRY(am43xx_do_wfi_sz)
+ .word . - am43xx_do_wfi
Although similar to AM33XX, introduce a new low-level asm file for suspend containing new context save and restore paths for EMIF and l2 cache disabling and enabling. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> --- v2->v3: * Reverse the order of entering self refresh and saving context so that we save the exact state of the emif at suspend time. arch/arm/mach-omap2/sleep43xx.S | 394 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 394 insertions(+) create mode 100644 arch/arm/mach-omap2/sleep43xx.S