diff mbox

[06/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for pixcir_ts

Message ID 20170929164429.780-7-afd@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andrew Davis Sept. 29, 2017, 4:44 p.m. UTC 
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 822e54cffd29..9c4ac6f715ec 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -323,12 +323,18 @@ 
 			>;
 		};
 
-		pixcir_ts_pins: pixcir_ts_pins {
+		pixcir_ts_pins_default: pixcir_ts_pins_default {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
 			>;
 		};
 
+		pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
 		hdq_pins: pinmux_hdq_pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
@@ -538,8 +544,10 @@ 
 
 	pixcir_ts@5c {
 		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pixcir_ts_pins_default>;
+		pinctrl-1 = <&pixcir_ts_pins_sleep>;
+
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;