Message ID | 20171111212244.orvurxipakkywzde@lenoch (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 11/11/17 23:22, Ladislav Michl wrote: > Since the very first commit (36cd4fb5d277: "[MTD] [OneNAND] Add OMAP2 / OMAP3 > OneNAND driver") DMA is disabled for OMAP2. Later fixes thus went only into > OMAP3 specific DMA functions which turned out not to be so OMAP3 specific, > so merge those two implementations. > > Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Roger Quadros <rogerq@ti.com> > --- > Changes: > -v3: new patch > -v4: rebase on top of Peter's patch > > drivers/mtd/onenand/omap2.c | 129 ++------------------------------------------ > 1 file changed, 4 insertions(+), 125 deletions(-) > > diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c > index d22163271dc9..36314124488d 100644 > --- a/drivers/mtd/onenand/omap2.c > +++ b/drivers/mtd/onenand/omap2.c > @@ -315,9 +315,7 @@ static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c, > return 0; > } > > -#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2) > - > -static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, > +static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, > unsigned char *buffer, int offset, > size_t count) > { > @@ -379,7 +377,7 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, > return 0; > } > > -static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, > +static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, > const unsigned char *buffer, > int offset, size_t count) > { > @@ -434,120 +432,6 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, > return 0; > } > > -#else > - > -static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, > - unsigned char *buffer, int offset, > - size_t count) > -{ > - return -ENOSYS; > -} > - > -static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, > - const unsigned char *buffer, > - int offset, size_t count) > -{ > - return -ENOSYS; > -} > - > -#endif > - > -#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2) > - > -static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, > - unsigned char *buffer, int offset, > - size_t count) > -{ > - struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); > - struct onenand_chip *this = mtd->priv; > - dma_addr_t dma_src, dma_dst; > - int bram_offset, ret; > - > - bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; > - /* DMA is not used. Revisit PM requirements before enabling it. */ > - if (1 || (c->dma_channel < 0) || > - ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || > - (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { > - memcpy(buffer, (__force void *)(this->base + bram_offset), > - count); > - return 0; > - } > - > - dma_src = c->phys_base + bram_offset; > - dma_dst = dma_map_single(&c->pdev->dev, buffer, count, > - DMA_FROM_DEVICE); > - if (dma_mapping_error(&c->pdev->dev, dma_dst)) { > - dev_err(&c->pdev->dev, > - "Couldn't DMA map a %d byte buffer\n", > - count); > - return -1; > - } > - > - ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); > - dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE); > - > - if (ret) > - dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); > - > - return ret; > -} > - > -static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, > - const unsigned char *buffer, > - int offset, size_t count) > -{ > - struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); > - struct onenand_chip *this = mtd->priv; > - dma_addr_t dma_src, dma_dst; > - int bram_offset, ret; > - > - bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; > - /* DMA is not used. Revisit PM requirements before enabling it. */ > - if (1 || (c->dma_channel < 0) || > - ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || > - (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { > - memcpy((__force void *)(this->base + bram_offset), buffer, > - count); > - return 0; > - } > - > - dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count, > - DMA_TO_DEVICE); > - dma_dst = c->phys_base + bram_offset; > - if (dma_mapping_error(&c->pdev->dev, dma_src)) { > - dev_err(&c->pdev->dev, > - "Couldn't DMA map a %d byte buffer\n", > - count); > - return -1; > - } > - > - ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); > - dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE); > - > - if (ret) > - dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); > - > - return ret; > -} > - > -#else > - > -static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, > - unsigned char *buffer, int offset, > - size_t count) > -{ > - return -ENOSYS; > -} > - > -static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, > - const unsigned char *buffer, > - int offset, size_t count) > -{ > - return -ENOSYS; > -} > - > -#endif > - > static struct platform_driver omap2_onenand_driver; > > static void omap2_onenand_shutdown(struct platform_device *pdev) > @@ -671,13 +555,8 @@ static int omap2_onenand_probe(struct platform_device *pdev) > this = &c->onenand; > if (c->dma_channel >= 0) { > this->wait = omap2_onenand_wait; > - if (c->flags & ONENAND_IN_OMAP34XX) { > - this->read_bufferram = omap3_onenand_read_bufferram; > - this->write_bufferram = omap3_onenand_write_bufferram; > - } else { > - this->read_bufferram = omap2_onenand_read_bufferram; > - this->write_bufferram = omap2_onenand_write_bufferram; > - } > + this->read_bufferram = omap2_onenand_read_bufferram; > + this->write_bufferram = omap2_onenand_write_bufferram; > } > > if ((r = onenand_scan(&c->mtd, 1)) < 0) >
Hi, On Sat, Nov 11, 2017 at 10:22:44PM +0100, Ladislav Michl wrote: > Since the very first commit (36cd4fb5d277: "[MTD] [OneNAND] Add OMAP2 / OMAP3 > OneNAND driver") DMA is disabled for OMAP2. Later fixes thus went only into > OMAP3 specific DMA functions which turned out not to be so OMAP3 specific, > so merge those two implementations. > > Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> -- Sebastian > --- > Changes: > -v3: new patch > -v4: rebase on top of Peter's patch > > drivers/mtd/onenand/omap2.c | 129 ++------------------------------------------ > 1 file changed, 4 insertions(+), 125 deletions(-) > > diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c > index d22163271dc9..36314124488d 100644 > --- a/drivers/mtd/onenand/omap2.c > +++ b/drivers/mtd/onenand/omap2.c > @@ -315,9 +315,7 @@ static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c, > return 0; > } > > -#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2) > - > -static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, > +static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, > unsigned char *buffer, int offset, > size_t count) > { > @@ -379,7 +377,7 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, > return 0; > } > > -static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, > +static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, > const unsigned char *buffer, > int offset, size_t count) > { > @@ -434,120 +432,6 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, > return 0; > } > > -#else > - > -static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, > - unsigned char *buffer, int offset, > - size_t count) > -{ > - return -ENOSYS; > -} > - > -static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, > - const unsigned char *buffer, > - int offset, size_t count) > -{ > - return -ENOSYS; > -} > - > -#endif > - > -#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2) > - > -static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, > - unsigned char *buffer, int offset, > - size_t count) > -{ > - struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); > - struct onenand_chip *this = mtd->priv; > - dma_addr_t dma_src, dma_dst; > - int bram_offset, ret; > - > - bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; > - /* DMA is not used. Revisit PM requirements before enabling it. */ > - if (1 || (c->dma_channel < 0) || > - ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || > - (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { > - memcpy(buffer, (__force void *)(this->base + bram_offset), > - count); > - return 0; > - } > - > - dma_src = c->phys_base + bram_offset; > - dma_dst = dma_map_single(&c->pdev->dev, buffer, count, > - DMA_FROM_DEVICE); > - if (dma_mapping_error(&c->pdev->dev, dma_dst)) { > - dev_err(&c->pdev->dev, > - "Couldn't DMA map a %d byte buffer\n", > - count); > - return -1; > - } > - > - ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); > - dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE); > - > - if (ret) > - dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); > - > - return ret; > -} > - > -static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, > - const unsigned char *buffer, > - int offset, size_t count) > -{ > - struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); > - struct onenand_chip *this = mtd->priv; > - dma_addr_t dma_src, dma_dst; > - int bram_offset, ret; > - > - bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; > - /* DMA is not used. Revisit PM requirements before enabling it. */ > - if (1 || (c->dma_channel < 0) || > - ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || > - (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { > - memcpy((__force void *)(this->base + bram_offset), buffer, > - count); > - return 0; > - } > - > - dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count, > - DMA_TO_DEVICE); > - dma_dst = c->phys_base + bram_offset; > - if (dma_mapping_error(&c->pdev->dev, dma_src)) { > - dev_err(&c->pdev->dev, > - "Couldn't DMA map a %d byte buffer\n", > - count); > - return -1; > - } > - > - ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); > - dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE); > - > - if (ret) > - dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); > - > - return ret; > -} > - > -#else > - > -static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, > - unsigned char *buffer, int offset, > - size_t count) > -{ > - return -ENOSYS; > -} > - > -static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, > - const unsigned char *buffer, > - int offset, size_t count) > -{ > - return -ENOSYS; > -} > - > -#endif > - > static struct platform_driver omap2_onenand_driver; > > static void omap2_onenand_shutdown(struct platform_device *pdev) > @@ -671,13 +555,8 @@ static int omap2_onenand_probe(struct platform_device *pdev) > this = &c->onenand; > if (c->dma_channel >= 0) { > this->wait = omap2_onenand_wait; > - if (c->flags & ONENAND_IN_OMAP34XX) { > - this->read_bufferram = omap3_onenand_read_bufferram; > - this->write_bufferram = omap3_onenand_write_bufferram; > - } else { > - this->read_bufferram = omap2_onenand_read_bufferram; > - this->write_bufferram = omap2_onenand_write_bufferram; > - } > + this->read_bufferram = omap2_onenand_read_bufferram; > + this->write_bufferram = omap2_onenand_write_bufferram; > } > > if ((r = onenand_scan(&c->mtd, 1)) < 0) > -- > 2.11.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index d22163271dc9..36314124488d 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -315,9 +315,7 @@ static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c, return 0; } -#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2) - -static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, +static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, unsigned char *buffer, int offset, size_t count) { @@ -379,7 +377,7 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, return 0; } -static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, +static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, const unsigned char *buffer, int offset, size_t count) { @@ -434,120 +432,6 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, return 0; } -#else - -static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, - unsigned char *buffer, int offset, - size_t count) -{ - return -ENOSYS; -} - -static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, - const unsigned char *buffer, - int offset, size_t count) -{ - return -ENOSYS; -} - -#endif - -#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2) - -static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, - unsigned char *buffer, int offset, - size_t count) -{ - struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); - struct onenand_chip *this = mtd->priv; - dma_addr_t dma_src, dma_dst; - int bram_offset, ret; - - bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; - /* DMA is not used. Revisit PM requirements before enabling it. */ - if (1 || (c->dma_channel < 0) || - ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || - (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { - memcpy(buffer, (__force void *)(this->base + bram_offset), - count); - return 0; - } - - dma_src = c->phys_base + bram_offset; - dma_dst = dma_map_single(&c->pdev->dev, buffer, count, - DMA_FROM_DEVICE); - if (dma_mapping_error(&c->pdev->dev, dma_dst)) { - dev_err(&c->pdev->dev, - "Couldn't DMA map a %d byte buffer\n", - count); - return -1; - } - - ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); - dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE); - - if (ret) - dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); - - return ret; -} - -static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, - const unsigned char *buffer, - int offset, size_t count) -{ - struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); - struct onenand_chip *this = mtd->priv; - dma_addr_t dma_src, dma_dst; - int bram_offset, ret; - - bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; - /* DMA is not used. Revisit PM requirements before enabling it. */ - if (1 || (c->dma_channel < 0) || - ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || - (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { - memcpy((__force void *)(this->base + bram_offset), buffer, - count); - return 0; - } - - dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count, - DMA_TO_DEVICE); - dma_dst = c->phys_base + bram_offset; - if (dma_mapping_error(&c->pdev->dev, dma_src)) { - dev_err(&c->pdev->dev, - "Couldn't DMA map a %d byte buffer\n", - count); - return -1; - } - - ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); - dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE); - - if (ret) - dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); - - return ret; -} - -#else - -static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, - unsigned char *buffer, int offset, - size_t count) -{ - return -ENOSYS; -} - -static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, - const unsigned char *buffer, - int offset, size_t count) -{ - return -ENOSYS; -} - -#endif - static struct platform_driver omap2_onenand_driver; static void omap2_onenand_shutdown(struct platform_device *pdev) @@ -671,13 +555,8 @@ static int omap2_onenand_probe(struct platform_device *pdev) this = &c->onenand; if (c->dma_channel >= 0) { this->wait = omap2_onenand_wait; - if (c->flags & ONENAND_IN_OMAP34XX) { - this->read_bufferram = omap3_onenand_read_bufferram; - this->write_bufferram = omap3_onenand_write_bufferram; - } else { - this->read_bufferram = omap2_onenand_read_bufferram; - this->write_bufferram = omap2_onenand_write_bufferram; - } + this->read_bufferram = omap2_onenand_read_bufferram; + this->write_bufferram = omap2_onenand_write_bufferram; } if ((r = onenand_scan(&c->mtd, 1)) < 0)
Since the very first commit (36cd4fb5d277: "[MTD] [OneNAND] Add OMAP2 / OMAP3 OneNAND driver") DMA is disabled for OMAP2. Later fixes thus went only into OMAP3 specific DMA functions which turned out not to be so OMAP3 specific, so merge those two implementations. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> --- Changes: -v3: new patch -v4: rebase on top of Peter's patch drivers/mtd/onenand/omap2.c | 129 ++------------------------------------------ 1 file changed, 4 insertions(+), 125 deletions(-)