| Message ID | 20171219085823.8695-4-kishon@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Dec 19, 2017 at 02:28:23PM +0530, Kishon Vijay Abraham I wrote: > dra74x/dra76x and dra72x has separate compatible strings. Add support s/has/have > for these compatible strings in pci-dra7xx driver to perform syscon > configurations required to get x2 mode working. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 90 insertions(+) > > diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c > index e77a4ceed74c..3b4427c10228 100644 > --- a/drivers/pci/dwc/pci-dra7xx.c > +++ b/drivers/pci/dwc/pci-dra7xx.c > @@ -83,11 +83,15 @@ > #define MSI_REQ_GRANT BIT(0) > #define MSI_VECTOR_SHIFT 7 > > +#define PCIE_1LANE_2LANE_SELECTION BIT(13) > +#define PCIE_B1C0_MODE_SEL BIT(2) > + > struct dra7xx_pcie { > struct dw_pcie *pci; > void __iomem *base; /* DT ti_conf */ > int phy_count; /* DT phy-names count */ > struct phy **phy; > + u32 *b1c0_mask; This looks unused in the current patch. > int link_gen; > struct irq_domain *irq_domain; > enum dw_pcie_device_mode mode; > @@ -95,6 +99,7 @@ struct dra7xx_pcie { > > struct dra7xx_pcie_of_data { > enum dw_pcie_device_mode mode; > + u32 b1co_mode_sel_mask; > }; > > #define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev) > @@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = { > .mode = DW_PCIE_EP_TYPE, > }; > > +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = { > + .b1co_mode_sel_mask = BIT(2), Nit: DT guys are more familiar than me on how this data should be encoded but maybe bit offset + length can be better ? I do not know, I have no problem leaving them as masks. > + .mode = DW_PCIE_RC_TYPE, > +}; > + > +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = { > + .b1co_mode_sel_mask = GENMASK(3, 2), > + .mode = DW_PCIE_RC_TYPE, > +}; > + > +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = { > + .b1co_mode_sel_mask = BIT(2), > + .mode = DW_PCIE_EP_TYPE, > +}; > + > +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = { > + .b1co_mode_sel_mask = GENMASK(3, 2), > + .mode = DW_PCIE_EP_TYPE, > +}; > + > static const struct of_device_id of_dra7xx_pcie_match[] = { > { > .compatible = "ti,dra7-pcie", > @@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = { > .compatible = "ti,dra7-pcie-ep", > .data = &dra7xx_pcie_ep_of_data, > }, > + { > + .compatible = "ti,dra746-pcie-rc", > + .data = &dra746_pcie_rc_of_data, > + }, > + { > + .compatible = "ti,dra726-pcie-rc", > + .data = &dra726_pcie_rc_of_data, > + }, > + { > + .compatible = "ti,dra746-pcie-ep", > + .data = &dra746_pcie_ep_of_data, > + }, > + { > + .compatible = "ti,dra726-pcie-ep", > + .data = &dra726_pcie_ep_of_data, > + }, > {}, > }; > > @@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev) > return ret; > } > > +static int dra7xx_pcie_configure_two_lane(struct device *dev, > + u32 b1co_mode_sel_mask) > +{ > + struct device_node *np = dev->of_node; > + struct regmap *pcie_syscon; > + unsigned int pcie_reg; > + > + pcie_syscon = syscon_regmap_lookup_by_phandle(np, > + "ti,syscon-lane-conf"); > + if (IS_ERR(pcie_syscon)) { > + dev_err(dev, "unable to get ti,syscon-lane-conf\n"); > + return -EINVAL; > + } > + > + if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1, > + &pcie_reg)) { > + dev_err(dev, "couldn't get lane configuration reg offset\n"); > + return -EINVAL; > + } > + > + regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION, > + PCIE_1LANE_2LANE_SELECTION); I do not know if this can create issues but the regmap should clear those bits in the error path ? > + > + pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel"); > + if (IS_ERR(pcie_syscon)) { > + dev_err(dev, "unable to get ti,syscon-lane-sel\n"); > + return -EINVAL; > + } > + > + if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1, > + &pcie_reg)) { > + dev_err(dev, "couldn't get lane selection reg offset\n"); > + return -EINVAL; > + } > + > + regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask, > + PCIE_B1C0_MODE_SEL); > + > + return 0; > +} > + > static int __init dra7xx_pcie_probe(struct platform_device *pdev) > { > u32 reg; > @@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) > const struct of_device_id *match; > const struct dra7xx_pcie_of_data *data; > enum dw_pcie_device_mode mode; > + u32 b1co_mode_sel_mask; Again, do you need this temporary variable (given that you pass the value below) ? Thanks, Lorenzo > match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev); > if (!match) > @@ -615,6 +698,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) > > data = (struct dra7xx_pcie_of_data *)match->data; > mode = (enum dw_pcie_device_mode)data->mode; > + b1co_mode_sel_mask = data->b1co_mode_sel_mask; > > dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL); > if (!dra7xx) > @@ -673,6 +757,12 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) > dra7xx->pci = pci; > dra7xx->phy_count = phy_count; > > + if (phy_count == 2) { > + ret = dra7xx_pcie_configure_two_lane(dev, b1co_mode_sel_mask); > + if (ret < 0) > + goto err_link; > + } > + > ret = dra7xx_pcie_enable_phy(dra7xx); > if (ret) { > dev_err(dev, "failed to enable phy\n"); > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Lorenzo, On Monday 26 February 2018 04:00 PM, Lorenzo Pieralisi wrote: > On Tue, Dec 19, 2017 at 02:28:23PM +0530, Kishon Vijay Abraham I wrote: >> dra74x/dra76x and dra72x has separate compatible strings. Add support > > s/has/have > >> for these compatible strings in pci-dra7xx driver to perform syscon >> configurations required to get x2 mode working. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 90 insertions(+) >> >> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c >> index e77a4ceed74c..3b4427c10228 100644 >> --- a/drivers/pci/dwc/pci-dra7xx.c >> +++ b/drivers/pci/dwc/pci-dra7xx.c >> @@ -83,11 +83,15 @@ >> #define MSI_REQ_GRANT BIT(0) >> #define MSI_VECTOR_SHIFT 7 >> >> +#define PCIE_1LANE_2LANE_SELECTION BIT(13) >> +#define PCIE_B1C0_MODE_SEL BIT(2) >> + >> struct dra7xx_pcie { >> struct dw_pcie *pci; >> void __iomem *base; /* DT ti_conf */ >> int phy_count; /* DT phy-names count */ >> struct phy **phy; >> + u32 *b1c0_mask; > > This looks unused in the current patch. yeah, I'll remove it while sending the next revision. > >> int link_gen; >> struct irq_domain *irq_domain; >> enum dw_pcie_device_mode mode; >> @@ -95,6 +99,7 @@ struct dra7xx_pcie { >> >> struct dra7xx_pcie_of_data { >> enum dw_pcie_device_mode mode; >> + u32 b1co_mode_sel_mask; >> }; >> >> #define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev) >> @@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = { >> .mode = DW_PCIE_EP_TYPE, >> }; >> >> +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = { >> + .b1co_mode_sel_mask = BIT(2), > > Nit: DT guys are more familiar than me on how this data should be > encoded but maybe bit offset + length can be better ? I do not know, I > have no problem leaving them as masks. > >> + .mode = DW_PCIE_RC_TYPE, >> +}; >> + >> +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = { >> + .b1co_mode_sel_mask = GENMASK(3, 2), >> + .mode = DW_PCIE_RC_TYPE, >> +}; >> + >> +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = { >> + .b1co_mode_sel_mask = BIT(2), >> + .mode = DW_PCIE_EP_TYPE, >> +}; >> + >> +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = { >> + .b1co_mode_sel_mask = GENMASK(3, 2), >> + .mode = DW_PCIE_EP_TYPE, >> +}; >> + >> static const struct of_device_id of_dra7xx_pcie_match[] = { >> { >> .compatible = "ti,dra7-pcie", >> @@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = { >> .compatible = "ti,dra7-pcie-ep", >> .data = &dra7xx_pcie_ep_of_data, >> }, >> + { >> + .compatible = "ti,dra746-pcie-rc", >> + .data = &dra746_pcie_rc_of_data, >> + }, >> + { >> + .compatible = "ti,dra726-pcie-rc", >> + .data = &dra726_pcie_rc_of_data, >> + }, >> + { >> + .compatible = "ti,dra746-pcie-ep", >> + .data = &dra746_pcie_ep_of_data, >> + }, >> + { >> + .compatible = "ti,dra726-pcie-ep", >> + .data = &dra726_pcie_ep_of_data, >> + }, >> {}, >> }; >> >> @@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev) >> return ret; >> } >> >> +static int dra7xx_pcie_configure_two_lane(struct device *dev, >> + u32 b1co_mode_sel_mask) >> +{ >> + struct device_node *np = dev->of_node; >> + struct regmap *pcie_syscon; >> + unsigned int pcie_reg; >> + >> + pcie_syscon = syscon_regmap_lookup_by_phandle(np, >> + "ti,syscon-lane-conf"); >> + if (IS_ERR(pcie_syscon)) { >> + dev_err(dev, "unable to get ti,syscon-lane-conf\n"); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1, >> + &pcie_reg)) { >> + dev_err(dev, "couldn't get lane configuration reg offset\n"); >> + return -EINVAL; >> + } >> + >> + regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION, >> + PCIE_1LANE_2LANE_SELECTION); > > I do not know if this can create issues but the regmap should clear > those bits in the error path ? hmm yeah, maybe we should try to fall back to 1 lane mode. > >> + >> + pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel"); >> + if (IS_ERR(pcie_syscon)) { >> + dev_err(dev, "unable to get ti,syscon-lane-sel\n"); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1, >> + &pcie_reg)) { >> + dev_err(dev, "couldn't get lane selection reg offset\n"); >> + return -EINVAL; >> + } >> + >> + regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask, >> + PCIE_B1C0_MODE_SEL); >> + >> + return 0; >> +} >> + >> static int __init dra7xx_pcie_probe(struct platform_device *pdev) >> { >> u32 reg; >> @@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) >> const struct of_device_id *match; >> const struct dra7xx_pcie_of_data *data; >> enum dw_pcie_device_mode mode; >> + u32 b1co_mode_sel_mask; > > Again, do you need this temporary variable (given that you pass the > value below) ? I used so that we don't cross the 80 line character limit below. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c index e77a4ceed74c..3b4427c10228 100644 --- a/drivers/pci/dwc/pci-dra7xx.c +++ b/drivers/pci/dwc/pci-dra7xx.c @@ -83,11 +83,15 @@ #define MSI_REQ_GRANT BIT(0) #define MSI_VECTOR_SHIFT 7 +#define PCIE_1LANE_2LANE_SELECTION BIT(13) +#define PCIE_B1C0_MODE_SEL BIT(2) + struct dra7xx_pcie { struct dw_pcie *pci; void __iomem *base; /* DT ti_conf */ int phy_count; /* DT phy-names count */ struct phy **phy; + u32 *b1c0_mask; int link_gen; struct irq_domain *irq_domain; enum dw_pcie_device_mode mode; @@ -95,6 +99,7 @@ struct dra7xx_pcie { struct dra7xx_pcie_of_data { enum dw_pcie_device_mode mode; + u32 b1co_mode_sel_mask; }; #define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev) @@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = { .mode = DW_PCIE_EP_TYPE, }; +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = { + .b1co_mode_sel_mask = BIT(2), + .mode = DW_PCIE_RC_TYPE, +}; + +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = { + .b1co_mode_sel_mask = GENMASK(3, 2), + .mode = DW_PCIE_RC_TYPE, +}; + +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = { + .b1co_mode_sel_mask = BIT(2), + .mode = DW_PCIE_EP_TYPE, +}; + +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = { + .b1co_mode_sel_mask = GENMASK(3, 2), + .mode = DW_PCIE_EP_TYPE, +}; + static const struct of_device_id of_dra7xx_pcie_match[] = { { .compatible = "ti,dra7-pcie", @@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = { .compatible = "ti,dra7-pcie-ep", .data = &dra7xx_pcie_ep_of_data, }, + { + .compatible = "ti,dra746-pcie-rc", + .data = &dra746_pcie_rc_of_data, + }, + { + .compatible = "ti,dra726-pcie-rc", + .data = &dra726_pcie_rc_of_data, + }, + { + .compatible = "ti,dra746-pcie-ep", + .data = &dra746_pcie_ep_of_data, + }, + { + .compatible = "ti,dra726-pcie-ep", + .data = &dra726_pcie_ep_of_data, + }, {}, }; @@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev) return ret; } +static int dra7xx_pcie_configure_two_lane(struct device *dev, + u32 b1co_mode_sel_mask) +{ + struct device_node *np = dev->of_node; + struct regmap *pcie_syscon; + unsigned int pcie_reg; + + pcie_syscon = syscon_regmap_lookup_by_phandle(np, + "ti,syscon-lane-conf"); + if (IS_ERR(pcie_syscon)) { + dev_err(dev, "unable to get ti,syscon-lane-conf\n"); + return -EINVAL; + } + + if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1, + &pcie_reg)) { + dev_err(dev, "couldn't get lane configuration reg offset\n"); + return -EINVAL; + } + + regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION, + PCIE_1LANE_2LANE_SELECTION); + + pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel"); + if (IS_ERR(pcie_syscon)) { + dev_err(dev, "unable to get ti,syscon-lane-sel\n"); + return -EINVAL; + } + + if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1, + &pcie_reg)) { + dev_err(dev, "couldn't get lane selection reg offset\n"); + return -EINVAL; + } + + regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask, + PCIE_B1C0_MODE_SEL); + + return 0; +} + static int __init dra7xx_pcie_probe(struct platform_device *pdev) { u32 reg; @@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) const struct of_device_id *match; const struct dra7xx_pcie_of_data *data; enum dw_pcie_device_mode mode; + u32 b1co_mode_sel_mask; match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev); if (!match) @@ -615,6 +698,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) data = (struct dra7xx_pcie_of_data *)match->data; mode = (enum dw_pcie_device_mode)data->mode; + b1co_mode_sel_mask = data->b1co_mode_sel_mask; dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL); if (!dra7xx) @@ -673,6 +757,12 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) dra7xx->pci = pci; dra7xx->phy_count = phy_count; + if (phy_count == 2) { + ret = dra7xx_pcie_configure_two_lane(dev, b1co_mode_sel_mask); + if (ret < 0) + goto err_link; + } + ret = dra7xx_pcie_enable_phy(dra7xx); if (ret) { dev_err(dev, "failed to enable phy\n");
dra74x/dra76x and dra72x has separate compatible strings. Add support for these compatible strings in pci-dra7xx driver to perform syscon configurations required to get x2 mode working. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+)