@@ -1275,7 +1275,7 @@ static int denali_attach_chip(struct nand_chip *chip)
chip->ecc.write_page_raw = denali_write_page_raw;
chip->ecc.read_oob = denali_read_oob;
chip->ecc.write_oob = denali_write_oob;
- chip->erase = denali_erase;
+ chip->legacy.erase = denali_erase;
ret = denali_multidev_fixup(denali);
if (ret)
@@ -4730,7 +4730,11 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
(page + pages_per_block))
chip->pagebuf = -1;
- status = chip->erase(chip, page & chip->pagemask);
+ if (chip->legacy.erase)
+ status = chip->legacy.erase(chip,
+ page & chip->pagemask);
+ else
+ status = single_erase(chip, page & chip->pagemask);
/* See if block erase succeeded */
if (status) {
@@ -5756,7 +5760,6 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
chip->options |= NAND_ROW_ADDR_3;
chip->badblockbits = 8;
- chip->erase = single_erase;
/* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->legacy.cmdfunc == nand_command)
@@ -1189,6 +1189,7 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
* @waitfunc: hardware specific function for wait on ready.
* @block_bad: check if a block is bad, using OOB markers
* @block_markbad: mark a block bad
+ * @erase: erase function
*
* If you look at this structure you're already wrong. These fields/hooks are
* all deprecated.
@@ -1207,6 +1208,7 @@ struct nand_legacy {
int (*waitfunc)(struct nand_chip *chip);
int (*block_bad)(struct nand_chip *chip, loff_t ofs);
int (*block_markbad)(struct nand_chip *chip, loff_t ofs);
+ int (*erase)(struct nand_chip *chip, int page);
};
/**
@@ -1228,7 +1230,6 @@ struct nand_legacy {
* @buf_align: minimum buffer alignment required by a platform
* @dummy_controller: dummy controller implementation for drivers that can
* only control a single chip
- * @erase: [REPLACEABLE] erase function
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
@@ -1308,7 +1309,6 @@ struct nand_chip {
int (*exec_op)(struct nand_chip *chip,
const struct nand_operation *op,
bool check_only);
- int (*erase)(struct nand_chip *chip, int page);
int (*set_features)(struct nand_chip *chip, int feature_addr,
uint8_t *subfeature_para);
int (*get_features)(struct nand_chip *chip, int feature_addr,
The ->erase() hook have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or the driver uses a specific path for the ERASE operation (denali), instead of implementing it generically. In any case, we should discourage people from overloading this method and encourage them to implement ->exec_op() instead. Move the ->erase() hook to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> --- drivers/mtd/nand/raw/denali.c | 2 +- drivers/mtd/nand/raw/nand_base.c | 7 +++++-- include/linux/mtd/rawnand.h | 4 ++-- 3 files changed, 8 insertions(+), 5 deletions(-)