From patchwork Tue Nov 13 14:01:33 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 10680723 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 140A514E2 for ; Tue, 13 Nov 2018 14:02:46 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 005CA2A980 for ; Tue, 13 Nov 2018 14:02:46 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id F24742A9C0; Tue, 13 Nov 2018 14:02:45 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id AA8692A9C5 for ; Tue, 13 Nov 2018 14:02:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2388170AbeKNAA7 (ORCPT ); Tue, 13 Nov 2018 19:00:59 -0500 Received: from mail-wr1-f68.google.com ([209.85.221.68]:35783 "EHLO mail-wr1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2388167AbeKNAA7 (ORCPT ); Tue, 13 Nov 2018 19:00:59 -0500 Received: by mail-wr1-f68.google.com with SMTP id z16-v6so13463742wrv.2 for ; Tue, 13 Nov 2018 06:02:40 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=iOIa5X6V4cgJ8Er7nxbPwFfoAVpLi0/2bfR7wn0jpPY=; b=olbsR3bryUL+m8cdBqebdbl5sXiBN6FUNTIZZrrRemVlScb33XIwsuM9Q9JcwdtlaI 3uldKDTKUG0/HCy3olbzzAGVV3WMn5IaxgRBtR+z2cfOvBvCJfMz7jPlmmOY9ovfqpnW W7peLuHFcHJRN79Qkfs6u4BwO3jrld5XA2jhNz46Qv2dT17h7Sb5uuxfnVggmm3AEINA ixyyOemKA4Mrg+EtP2ZxEoY0HNP93lKrKE5QUVRryKO1H+nLj5B4n4IWsMivfWSg8Qnv 8i57Osmv1WgjjkOJc7SqrwWBR3rnzS9qoGU2Rtur7p44jllEE7YXbhqhSVK0aEaSoNtr /pkw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=iOIa5X6V4cgJ8Er7nxbPwFfoAVpLi0/2bfR7wn0jpPY=; b=Hx6l1B26FIGdXjuIVJO69kP+kFpUPSky1+7v1dUg+b1hgABuEw8fIQ2nE1bkIfYPIj Z2qrAC2sUx82pZfzVr+V+63r0HdweeWQ911FDZm3Fkj/3h7A4Zty1c3ABO1U9edvrIuE qZrklAXwAV42P88V3cgX0CgU7ML3wHbif68/crbsvB4uLM8pnwF+MdGyyZTD7339oNcw IkTfMpkwCrav/3ibNOw1/F/WRjzAG54BRLubJCQzLJNZg8qpvv0MdbrN8bSf6jzPmuNp DywAAeRqvyytehnJD2whJ1W/s8JfIkAkfvxsoVoSmwGV/qPhrqFbww4vvF6n/3wueVUJ b/nw== X-Gm-Message-State: AGRZ1gImc3bp5lDHwtm1ByUjEUONoK4eLXfBtZ3cIxdSOe7Zc/7l/2Iw 451du73/MQ50CY4yLOsaKAtFEA== X-Google-Smtp-Source: AJdET5cElr1EIc919X00x8jS3UjEmAF6AlgNsuVE+jywos4OXpcGORBZeCSnsTE50fMcsp3jQTkJeQ== X-Received: by 2002:adf:f8d0:: with SMTP id f16-v6mr5271023wrq.265.1542117759794; Tue, 13 Nov 2018 06:02:39 -0800 (PST) Received: from debian-brgl.home ([2a01:cb1d:af:5b00:6d6c:8493:1ab5:dad7]) by smtp.gmail.com with ESMTPSA id m69-v6sm16604122wmb.8.2018.11.13.06.02.38 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 13 Nov 2018 06:02:39 -0800 (PST) From: Bartosz Golaszewski To: Sekhar Nori , Kevin Hilman , Russell King , Arnd Bergmann , Greg Kroah-Hartman , David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Nicolas Ferre , "David S . Miller" , Grygorii Strashko , Srinivas Kandagatla , Andrew Lunn , Florian Fainelli , Rob Herring , Frank Rowand , Wolfram Sang Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, linux-mtd@lists.infradead.org, netdev@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH v2 25/25] eeprom: at24: remove at24_platform_data Date: Tue, 13 Nov 2018 15:01:33 +0100 Message-Id: <20181113140133.17385-26-brgl@bgdev.pl> X-Mailer: git-send-email 2.19.1 In-Reply-To: <20181113140133.17385-1-brgl@bgdev.pl> References: <20181113140133.17385-1-brgl@bgdev.pl> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Bartosz Golaszewski There are no more users of at24_platform_data. Remove the relevant header and modify the driver code to not use it anymore. Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 1 - drivers/misc/eeprom/at24.c | 162 +++++++++++++---------------- include/linux/platform_data/at24.h | 60 ----------- 3 files changed, 75 insertions(+), 148 deletions(-) delete mode 100644 include/linux/platform_data/at24.h diff --git a/MAINTAINERS b/MAINTAINERS index 0abecc528dac..b3ee25e95bd0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2456,7 +2456,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 636ed7149793..f189a5307abd 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include #include #include -#include #include #include +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -107,10 +121,6 @@ module_param_named(write_timeout, at24_write_timeout, uint, 0); MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -468,63 +478,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "address-width", &val); - if (!err) { - switch (val) { - case 8: - if (chip->flags & AT24_FLAG_ADDR16) - dev_warn(dev, "Override address width to be 8, while default is 16\n"); - chip->flags &= ~AT24_FLAG_ADDR16; - break; - case 16: - chip->flags |= AT24_FLAG_ADDR16; - break; - default: - dev_warn(dev, "Bad \"address-width\" property: %u\n", - val); - } - } - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -541,13 +499,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -616,7 +570,8 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + u32 byte_len, page_size, flags, addrw; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; @@ -631,35 +586,72 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); if (err) - return err; + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "address-width", &addrw); + if (!err) { + switch (addrw) { + case 8: + if (flags & AT24_FLAG_ADDR16) + dev_warn(dev, + "Override address width to be 8, while default is 16\n"); + flags &= ~AT24_FLAG_ADDR16; + break; + case 16: + flags |= AT24_FLAG_ADDR16; + break; + default: + dev_warn(dev, "Bad \"address-width\" property: %u\n", + addrw); + } + } + + err = device_property_read_u32(dev, "size", &byte_len); + if (err) + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) + if (flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -672,11 +664,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -684,10 +676,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -730,7 +722,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -739,13 +731,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include -#include -#include - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */