@@ -97,8 +97,6 @@ struct keystone_pcie {
struct irq_domain *legacy_irq_domain;
struct device_node *np;
- int error_irq;
-
/* Application register space */
void __iomem *va_app_base; /* DT 1st resource */
struct resource app;
@@ -726,12 +724,6 @@ static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
return ret;
}
-static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
-{
- if (ks_pcie->error_irq > 0)
- ks_pcie_enable_error_irq(ks_pcie);
-}
-
/*
* When a PCI device does not exist during config cycles, keystone host gets a
* bus error instead of returning 0xffffffff. This handler always returns 0
@@ -793,7 +785,6 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
ks_pcie_stop_link(pci);
ks_pcie_setup_rc_app_regs(ks_pcie);
- ks_pcie_setup_interrupts(ks_pcie);
writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
pci->dbi_base + PCI_IO_BASE);
@@ -837,23 +828,6 @@ static int __init ks_pcie_add_pcie_port(struct keystone_pcie *ks_pcie,
struct device *dev = &pdev->dev;
int ret;
- /*
- * Index 0 is the platform interrupt for error interrupt
- * from RC. This is optional.
- */
- ks_pcie->error_irq = irq_of_parse_and_map(ks_pcie->np, 0);
- if (ks_pcie->error_irq <= 0)
- dev_info(dev, "no error IRQ defined\n");
- else {
- ret = request_irq(ks_pcie->error_irq, ks_pcie_err_irq_handler,
- IRQF_SHARED, "pcie-error-irq", ks_pcie);
- if (ret < 0) {
- dev_err(dev, "failed to request error IRQ %d\n",
- ks_pcie->error_irq);
- return ret;
- }
- }
-
pp->ops = &ks_pcie_host_ops;
ret = ks_pcie_dw_host_init(ks_pcie);
if (ret) {
@@ -929,6 +903,7 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
u32 num_lanes;
char name[10];
int ret;
+ int irq;
int i;
ks_pcie = devm_kzalloc(dev, sizeof(*ks_pcie), GFP_KERNEL);
@@ -948,6 +923,20 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
return ret;
}
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "missing IRQ resource: %d\n", irq);
+ return irq;
+ }
+
+ ret = request_irq(irq, ks_pcie_err_irq_handler, IRQF_SHARED,
+ "ks-pcie-error-irq", ks_pcie);
+ if (ret < 0) {
+ dev_err(dev, "failed to request error IRQ %d\n",
+ irq);
+ return ret;
+ }
+
ret = of_property_read_u32(np, "num-lanes", &num_lanes);
if (ret)
num_lanes = 1;
@@ -1003,6 +992,8 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
if (ret < 0)
goto err_get_sync;
+ ks_pcie_enable_error_irq(ks_pcie);
+
return 0;
err_get_sync:
pci-keystone driver uses irq_of_parse_and_map to get irq number of error_irq. Use platform_get_irq instead and move platform_get_irq() and request_irq() of error_irq from ks_pcie_add_pcie_port to ks_pcie_probe since error_irq is common to both RC mode and EP mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/pci/controller/dwc/pci-keystone.c | 43 +++++++++-------------- 1 file changed, 17 insertions(+), 26 deletions(-)