| Message ID | 20190319063533.12171-3-faiz_abbas@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Fixes for commands errors during tuning | expand |
Hi Faiz, On 19/03/19 12:05 PM, Faiz Abbas wrote: > commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset > callback") skips data resets during tuning operation. Because of this, > a data error or data finish interrupt might still arrive after a command > error has been handled and the mrq ended. This ends up with a "mmc0: Got > data interrupt 0x00000002 even though no data operation was in progress" > error message. > > Fix this by adding a platform specific callback for sdhci_irq. Mark the > mrq as a failure but wait for a data interrupt instead of calling > finish_mrq(). > > Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> > --- > drivers/mmc/host/sdhci-omap.c | 36 +++++++++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c > index b1a66ca3821a..765873dff7ca 100644 > --- a/drivers/mmc/host/sdhci-omap.c > +++ b/drivers/mmc/host/sdhci-omap.c > @@ -797,6 +797,41 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask) > sdhci_reset(host, mask); > } > > +#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) > +#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE) > + > +static irqreturn_t sdhci_omap_irq(struct sdhci_host *host, u32 intmask) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); > + > + if (omap_host->is_tuning && (intmask & CMD_ERR_MASK)) { > + > + /* > + * Since we are not resetting data lines during tuning > + * operation, data error or data complete interrupts > + * might still arrive. Mark this request as a failure > + * but still wait for the data interrupt > + */ > + if (intmask & SDHCI_INT_TIMEOUT) CMD_ERR_MASK doesn't have SDHCI_INT_TIMEOUT. So this will never be true. Thanks Kishon
Hi Kishon, On 19/03/19 1:37 PM, Kishon Vijay Abraham I wrote: > Hi Faiz, > > On 19/03/19 12:05 PM, Faiz Abbas wrote: >> commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset >> callback") skips data resets during tuning operation. Because of this, >> a data error or data finish interrupt might still arrive after a command >> error has been handled and the mrq ended. This ends up with a "mmc0: Got >> data interrupt 0x00000002 even though no data operation was in progress" >> error message. >> >> Fix this by adding a platform specific callback for sdhci_irq. Mark the >> mrq as a failure but wait for a data interrupt instead of calling >> finish_mrq(). >> >> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> >> --- >> drivers/mmc/host/sdhci-omap.c | 36 +++++++++++++++++++++++++++++++++++ >> 1 file changed, 36 insertions(+) >> >> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c >> index b1a66ca3821a..765873dff7ca 100644 >> --- a/drivers/mmc/host/sdhci-omap.c >> +++ b/drivers/mmc/host/sdhci-omap.c >> @@ -797,6 +797,41 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask) >> sdhci_reset(host, mask); >> } >> >> +#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) >> +#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE) >> + >> +static irqreturn_t sdhci_omap_irq(struct sdhci_host *host, u32 intmask) >> +{ >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); >> + struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); >> + >> + if (omap_host->is_tuning && (intmask & CMD_ERR_MASK)) { >> + >> + /* >> + * Since we are not resetting data lines during tuning >> + * operation, data error or data complete interrupts >> + * might still arrive. Mark this request as a failure >> + * but still wait for the data interrupt >> + */ >> + if (intmask & SDHCI_INT_TIMEOUT) > > CMD_ERR_MASK doesn't have SDHCI_INT_TIMEOUT. So this will never be true. > Yeah, need to SDHCI_INT_TIMEOUT to CMD_ERR_MASK. Thanks, Faiz
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index b1a66ca3821a..765873dff7ca 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -797,6 +797,41 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask) sdhci_reset(host, mask); } +#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) +#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE) + +static irqreturn_t sdhci_omap_irq(struct sdhci_host *host, u32 intmask) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); + + if (omap_host->is_tuning && (intmask & CMD_ERR_MASK)) { + + /* + * Since we are not resetting data lines during tuning + * operation, data error or data complete interrupts + * might still arrive. Mark this request as a failure + * but still wait for the data interrupt + */ + if (intmask & SDHCI_INT_TIMEOUT) + host->cmd->error = -ETIMEDOUT; + else + host->cmd->error = -EILSEQ; + + sdhci_finish_command(host); + + /* + * Sometimes command error interrupts and command complete + * interrupt will arrive together. Clear all command related + * interrupts here. + */ + sdhci_writel(host, intmask & CMD_MASK, SDHCI_INT_STATUS); + intmask &= ~CMD_MASK; + } + + return intmask; +} + static struct sdhci_ops sdhci_omap_ops = { .set_clock = sdhci_omap_set_clock, .set_power = sdhci_omap_set_power, @@ -807,6 +842,7 @@ static struct sdhci_ops sdhci_omap_ops = { .platform_send_init_74_clocks = sdhci_omap_init_74_clocks, .reset = sdhci_omap_reset, .set_uhs_signaling = sdhci_omap_set_uhs_signaling, + .irq = sdhci_omap_irq, }; static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)
commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset callback") skips data resets during tuning operation. Because of this, a data error or data finish interrupt might still arrive after a command error has been handled and the mrq ended. This ends up with a "mmc0: Got data interrupt 0x00000002 even though no data operation was in progress" error message. Fix this by adding a platform specific callback for sdhci_irq. Mark the mrq as a failure but wait for a data interrupt instead of calling finish_mrq(). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- drivers/mmc/host/sdhci-omap.c | 36 +++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)