diff mbox series

[2/4] ARM: dts: imx: Use new CODEC reset pin name

Message ID 20190329181313.21009-2-afd@ti.com (mailing list archive)
State New, archived
Headers show
Series [1/4] ARM: dts: imx6: RDU2: Use new CODEC reset pin name | expand

Commit Message

Andrew Davis March 29, 2019, 6:13 p.m. UTC 
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 9cb9a7439121..aee9221f0f29 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -311,7 +311,7 @@ 
 	tlv320aic3105: codec@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
 		/* Regulators */