| Message ID | 20190722154538.5314-4-david@lechnology.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | new driver for TI eQEP | expand |
* David Lechner <david@lechnology.com> [190722 15:46]: > This adds new nodes for the Texas Instruments Enhanced Quadrature > Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX. > > Signed-off-by: David Lechner <david@lechnology.com> > --- > arch/arm/boot/dts/am33xx-l4.dtsi | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi > index 3b1fb2ba4dff..7fdc2f61c553 100644 > --- a/arch/arm/boot/dts/am33xx-l4.dtsi > +++ b/arch/arm/boot/dts/am33xx-l4.dtsi > @@ -1908,6 +1908,15 @@ > status = "disabled"; > }; > > + eqep0: eqep@180 { > + compatible = "ti,am3352-eqep"; > + reg = <0x180 0x80>; > + clocks = <&l4ls_gclk>; > + clock-names = "fck"; > + interrupts = <79>; > + status = "disabled"; > + }; > + You probably no longer need to map any clocks here as this is now a child of the interconnect target module managed by ti-sysc driver. I have not checked but probably l4ls_gclk is same as clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0> already managed by ti-sysc. If so, then just using runtime PM calls in any of the child device drivers will keep it enabled. If l4ls_gclk is a separate functional clock, then it still needs to be managed by the child device driver directly. Regards, Tony
On 7/23/19 3:42 AM, Tony Lindgren wrote: > * David Lechner <david@lechnology.com> [190722 15:46]: >> This adds new nodes for the Texas Instruments Enhanced Quadrature >> Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX. >> >> Signed-off-by: David Lechner <david@lechnology.com> >> --- >> arch/arm/boot/dts/am33xx-l4.dtsi | 27 +++++++++++++++++++++++++++ >> 1 file changed, 27 insertions(+) >> >> diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi >> index 3b1fb2ba4dff..7fdc2f61c553 100644 >> --- a/arch/arm/boot/dts/am33xx-l4.dtsi >> +++ b/arch/arm/boot/dts/am33xx-l4.dtsi >> @@ -1908,6 +1908,15 @@ >> status = "disabled"; >> }; >> >> + eqep0: eqep@180 { >> + compatible = "ti,am3352-eqep"; >> + reg = <0x180 0x80>; >> + clocks = <&l4ls_gclk>; >> + clock-names = "fck"; >> + interrupts = <79>; >> + status = "disabled"; >> + }; >> + > > You probably no longer need to map any clocks here as this> is now a child of the interconnect target module managed > by ti-sysc driver. I have not checked but probably l4ls_gclk > is same as clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0> > already managed by ti-sysc. If so, then just using runtime PM > calls in any of the child device drivers will keep it enabled. > > If l4ls_gclk is a separate functional clock, then it still > needs to be managed by the child device driver directly. The clock is included so that we can get the clock rate for the timing aspects of the eQEP, not for power management. I chose to use the "fck" name to be consistent with the sibling EHRPWM and ECAP nodes that already have the same bindings for the same clock.
* David Lechner <david@lechnology.com> [190723 14:46]: > On 7/23/19 3:42 AM, Tony Lindgren wrote: > > * David Lechner <david@lechnology.com> [190722 15:46]: > > > This adds new nodes for the Texas Instruments Enhanced Quadrature > > > Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX. > > > > > > Signed-off-by: David Lechner <david@lechnology.com> > > > --- > > > arch/arm/boot/dts/am33xx-l4.dtsi | 27 +++++++++++++++++++++++++++ > > > 1 file changed, 27 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi > > > index 3b1fb2ba4dff..7fdc2f61c553 100644 > > > --- a/arch/arm/boot/dts/am33xx-l4.dtsi > > > +++ b/arch/arm/boot/dts/am33xx-l4.dtsi > > > @@ -1908,6 +1908,15 @@ > > > status = "disabled"; > > > }; > > > + eqep0: eqep@180 { > > > + compatible = "ti,am3352-eqep"; > > > + reg = <0x180 0x80>; > > > + clocks = <&l4ls_gclk>; > > > + clock-names = "fck"; > > > + interrupts = <79>; > > > + status = "disabled"; > > > + }; > > > + > > > > You probably no longer need to map any clocks here as this> is now a child of the interconnect target module managed > > by ti-sysc driver. I have not checked but probably l4ls_gclk > > is same as clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0> > > already managed by ti-sysc. If so, then just using runtime PM > > calls in any of the child device drivers will keep it enabled. > > > > If l4ls_gclk is a separate functional clock, then it still > > needs to be managed by the child device driver directly. > > The clock is included so that we can get the clock rate for > the timing aspects of the eQEP, not for power management. > > I chose to use the "fck" name to be consistent with the > sibling EHRPWM and ECAP nodes that already have the same > bindings for the same clock. OK makes sense to me thanks. Tony
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 3b1fb2ba4dff..7fdc2f61c553 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1908,6 +1908,15 @@ status = "disabled"; }; + eqep0: eqep@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <79>; + status = "disabled"; + }; + ehrpwm0: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -1961,6 +1970,15 @@ status = "disabled"; }; + eqep1: eqep@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <88>; + status = "disabled"; + }; + ehrpwm1: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; @@ -2014,6 +2032,15 @@ status = "disabled"; }; + eqep2: eqep@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <89>; + status = "disabled"; + }; + ehrpwm2: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
This adds new nodes for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX. Signed-off-by: David Lechner <david@lechnology.com> --- arch/arm/boot/dts/am33xx-l4.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)