@@ -5,23 +5,13 @@
/dts-v1/;
#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "TI AM335x BeagleBone Blue";
compatible = "ti,am335x-bone-blue", "ti,am33xx";
- cpus {
- cpu@0 {
- cpu0-supply = <&dcdc2_reg>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000>; /* 512 MB */
- };
-
chosen {
stdout-path = &uart0;
};
@@ -142,13 +132,6 @@
>;
};
- i2c0_pins: pinmux_i2c0_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
- AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
- >;
- };
-
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
@@ -352,16 +335,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
-
- status = "okay";
- clock-frequency = <400000>;
-
- tps: tps@24 {
- reg = <0x24>;
- };
-
baseboard_eeprom: baseboard_eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
@@ -405,66 +378,13 @@
/include/ "tps65217.dtsi"
&tps {
- interrupts = <7>; /* NMI */
- interrupt-parent = <&intc>;
+ /delete-property/ ti,pmic-shutdown-controller;
charger {
interrupts = <0>, <1>;
interrupt-names = "USB", "AC";
status = "okay";
};
-
- pwrbutton {
- interrupts = <2>;
- status = "okay";
- };
-
- regulators {
- dcdc1_reg: regulator@0 {
- regulator-name = "vdds_dpr";
- regulator-always-on;
- };
-
- dcdc2_reg: regulator@1 {
- /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
- regulator-name = "vdd_mpu";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1351500>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- dcdc3_reg: regulator@2 {
- /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
- regulator-name = "vdd_core";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1150000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: regulator@3 {
- regulator-name = "vio,vrtc,vdds";
- regulator-always-on;
- };
-
- ldo2_reg: regulator@4 {
- regulator-name = "vdd_3v3aux";
- regulator-always-on;
- };
-
- ldo3_reg: regulator@5 {
- regulator-name = "vdd_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: regulator@6 {
- regulator-name = "vdd_3v3a";
- regulator-always-on;
- };
- };
};
&mmc1 {
@@ -526,14 +446,6 @@
};
};
-&aes {
- status = "okay";
-};
-
-&sham {
- status = "okay";
-};
-
&rtc {
system-power-controller;
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
This makes use of the am335x-osd335x-common.dtsi file that contains the common device tree components for Octavo Systems AM335x System-in- Package that is used on the BeagleBone Blue. This has two minor side-effects: 1. pinmux_i2c0_pins is renamed to pinmux-i2c0-pins 2. the 1000MHz cpufreq operating point is enabled Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: David Lechner <david@lechnology.com> --- v2 changes: - fix typo s/1MHz/1000MHz/ in commit message arch/arm/boot/dts/am335x-boneblue.dts | 92 +-------------------------- 1 file changed, 2 insertions(+), 90 deletions(-)