diff mbox series

[11/13] PCI: j721e: Add TI J721E PCIe driver

Message ID 20191209092147.22901-12-kishon@ti.com (mailing list archive)
State New, archived
Headers show
Series Add PCIe support to TI's J721E SoC | expand

Commit Message

Kishon Vijay Abraham I Dec. 9, 2019, 9:21 a.m. UTC 
Add support for PCIe controller in J721E SoC. The controller uses the
Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
will work in both host mode and device mode.
Some of the features of the controller are:
  *) Supports both RC mode and EP mode
  *) Supports MSI and MSI-X support
  *) Supports upto GEN3 speed mode
  *) Supports SR-IOV capability
  *) Ability to route all transactions via SMMU (support will be added
     in a later patch).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/Kconfig     |  23 ++
 drivers/pci/controller/cadence/Makefile    |   1 +
 drivers/pci/controller/cadence/pci-j721e.c | 430 +++++++++++++++++++++
 3 files changed, 454 insertions(+)
 create mode 100644 drivers/pci/controller/cadence/pci-j721e.c

Comments

Andrew Murray Dec. 17, 2019, 2:23 p.m. UTC | #1 
On Mon, Dec 09, 2019 at 02:51:45PM +0530, Kishon Vijay Abraham I wrote:
> Add support for PCIe controller in J721E SoC. The controller uses the
> Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
> will work in both host mode and device mode.
> Some of the features of the controller are:
>   *) Supports both RC mode and EP mode
>   *) Supports MSI and MSI-X support
>   *) Supports upto GEN3 speed mode
>   *) Supports SR-IOV capability
>   *) Ability to route all transactions via SMMU (support will be added
>      in a later patch).
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/pci/controller/cadence/Kconfig     |  23 ++
>  drivers/pci/controller/cadence/Makefile    |   1 +
>  drivers/pci/controller/cadence/pci-j721e.c | 430 +++++++++++++++++++++
>  3 files changed, 454 insertions(+)
>  create mode 100644 drivers/pci/controller/cadence/pci-j721e.c
> 
> diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
> index b76b3cf55ce5..5d30564190e1 100644
> --- a/drivers/pci/controller/cadence/Kconfig
> +++ b/drivers/pci/controller/cadence/Kconfig
> @@ -42,4 +42,27 @@ config PCIE_CADENCE_PLAT_EP
>  	  endpoint mode. This PCIe controller may be embedded into many
>  	  different vendors SoCs.
>  
> +config PCI_J721E
> +	bool
> +
> +config PCI_J721E_HOST
> +	bool "TI J721E PCIe platform host controller"
> +	depends on OF
> +	select PCIE_CADENCE_HOST
> +	select PCI_J721E
> +	help
> +	  Say Y here if you want to support the TI J721E PCIe platform
> +	  controller in host mode. TI J721E PCIe controller uses Cadence PCIe
> +	  core.
> +
> +config PCI_J721E_EP
> +	bool "TI J721E PCIe platform endpoint controller"
> +	depends on OF
> +	depends on PCI_ENDPOINT
> +	select PCIE_CADENCE_EP
> +	select PCI_J721E
> +	help
> +	  Say Y here if you want to support the TI J721E PCIe platform
> +	  controller in endpoint mode. TI J721E PCIe controller uses Cadence PCIe
> +	  core.
>  endmenu
> diff --git a/drivers/pci/controller/cadence/Makefile b/drivers/pci/controller/cadence/Makefile
> index 232a3f20876a..9bac5fb2f13d 100644
> --- a/drivers/pci/controller/cadence/Makefile
> +++ b/drivers/pci/controller/cadence/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
>  obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
>  obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
>  obj-$(CONFIG_PCIE_CADENCE_PLAT) += pcie-cadence-plat.o
> +obj-$(CONFIG_PCI_J721E) += pci-j721e.o

Why pci-j721e and not pcie-j721e? Especially given that many of the structures
in the file use pcie (e.g. j721e_pcie_ep_data)


> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> new file mode 100644
> index 000000000000..9ffb7e88c739
> --- /dev/null
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -0,0 +1,430 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * pci-j721e - PCIe controller driver for TI's J721E SoCs
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/io.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +
> +#include "../../pci.h"
> +#include "pcie-cadence.h"
> +
> +#define J721E_PCIE_USER_CMD_STATUS	0x4
> +#define LINK_TRAINING_ENABLE		BIT(0)
> +
> +#define J721E_PCIE_USER_LINKSTATUS	0x14
> +#define LINK_STATUS			GENMASK(1, 0)
> +
> +enum link_status {
> +	NO_RECIEVERS_DETECTED,
> +	LINK_TRAINING_IN_PROGRESS,
> +	LINK_UP_DL_IN_PROGRESS,
> +	LINK_UP_DL_COMPLETED,
> +};
> +
> +#define J721E_MODE_RC			BIT(7)
> +#define LANE_COUNT_MASK			BIT(8)
> +#define LANE_COUNT(n)			((n) << 8)
> +
> +#define GENERATION_SEL_MASK		GENMASK(1, 0)
> +
> +#define MAX_LANES			2
> +
> +struct j721e_pcie {
> +	struct device		*dev;
> +	struct device_node	*node;
> +	u32			mode;
> +	u32			num_lanes;
> +	struct cdns_pcie	*cdns_pcie;
> +	void __iomem		*user_cfg_base;
> +};
> +
> +enum j721e_pcie_mode {
> +	PCI_MODE_RC,
> +	PCI_MODE_EP,
> +};
> +
> +struct j721e_pcie_data {
> +	enum j721e_pcie_mode	mode;
> +};
> +
> +static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
> +{
> +	return readl(pcie->user_cfg_base + offset);
> +}
> +
> +static inline void j721e_pcie_user_writel(struct j721e_pcie *pcie, u32 offset,
> +					  u32 value)
> +{
> +	writel(value, pcie->user_cfg_base + offset);
> +}
> +
> +static int j721e_pcie_start_link(struct cdns_pcie *cdns_pcie, bool start)
> +{
> +	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
> +	u32 reg;
> +
> +	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_CMD_STATUS);
> +	if (start)
> +		reg |= LINK_TRAINING_ENABLE;
> +	else
> +		reg &= ~LINK_TRAINING_ENABLE;
> +	j721e_pcie_user_writel(pcie, J721E_PCIE_USER_CMD_STATUS, reg);
> +
> +	return 0;
> +}
> +
> +static bool j721e_pcie_is_link_up(struct cdns_pcie *cdns_pcie)
> +{
> +	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
> +	u32 reg;
> +
> +	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_LINKSTATUS);
> +	reg &= LINK_STATUS;
> +	if (reg == LINK_UP_DL_COMPLETED)
> +		return true;
> +
> +	return false;
> +}
> +
> +static const struct cdns_pcie_ops j721e_ops_ops = {
> +	.read = cdns_pcie_read32,
> +	.write = cdns_pcie_write32,
> +	.start_link = j721e_pcie_start_link,
> +	.is_link_up = j721e_pcie_is_link_up,
> +};
> +
> +static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
> +{
> +	struct device *dev = pcie->dev;
> +	u32 mask = J721E_MODE_RC;
> +	u32 mode = pcie->mode;
> +	u32 val = 0;
> +	int ret = 0;
> +
> +	if (mode == PCI_MODE_RC)
> +		val = J721E_MODE_RC;
> +
> +	ret = regmap_update_bits(syscon, 0, mask, val);
> +	if (ret)
> +		dev_err(dev, "failed to set pcie mode\n");
> +
> +	return ret;
> +}
> +
> +static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
> +				     struct regmap *syscon)
> +{
> +	struct device *dev = pcie->dev;
> +	struct device_node *np = dev->of_node;
> +	int link_speed;
> +	u32 val = 0;
> +	int ret;
> +
> +	link_speed = of_pci_get_max_link_speed(np);
> +	if (link_speed < 2)
> +		link_speed = 2;
> +
> +	val = link_speed - 1;
> +	ret = regmap_update_bits(syscon, 0, GENERATION_SEL_MASK, val);
> +	if (ret)
> +		dev_err(dev, "failed to set link speed\n");
> +
> +	return ret;
> +}
> +
> +static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
> +				     struct regmap *syscon)
> +{
> +	struct device *dev = pcie->dev;
> +	u32 lanes = pcie->num_lanes;
> +	u32 val = 0;
> +	int ret;
> +
> +	val = LANE_COUNT(lanes - 1);
> +	ret = regmap_update_bits(syscon, 0, LANE_COUNT_MASK, val);
> +	if (ret)
> +		dev_err(dev, "failed to set link count\n");
> +
> +	return ret;
> +}
> +
> +static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
> +{
> +	struct device *dev = pcie->dev;
> +	struct device_node *node = dev->of_node;
> +	struct regmap *syscon;
> +	int ret;
> +
> +	syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-pcie-ctrl");
> +	if (IS_ERR(syscon)) {
> +		dev_err(dev, "Unable to get ti,syscon-pcie-ctrl regmap\n");
> +		return PTR_ERR(syscon);
> +	}
> +
> +	ret = j721e_pcie_set_mode(pcie, syscon);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set pci mode\n");
> +		return ret;
> +	}
> +
> +	ret = j721e_pcie_set_link_speed(pcie, syscon);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set link speed\n");
> +		return ret;
> +	}
> +
> +	ret = j721e_pcie_set_lane_count(pcie, syscon);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set num-lanes\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int cdns_ti_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> +				    int where, int size, u32 *value)
> +{
> +	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
> +	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
> +	unsigned int busn = bus->number;
> +
> +	if (busn == rc->bus_range->start)
> +		return pci_generic_config_read32(bus, devfn, where, size,
> +						 value);
> +
> +	return pci_generic_config_read(bus, devfn, where, size, value);
> +}
> +
> +static int cdns_ti_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> +				     int where, int size, u32 value)
> +{
> +	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
> +	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
> +	unsigned int busn = bus->number;
> +
> +	if (busn == rc->bus_range->start)
> +		return pci_generic_config_write32(bus, devfn, where, size,
> +						  value);
> +
> +	return pci_generic_config_write(bus, devfn, where, size, value);
> +}
> +
> +static struct pci_ops cdns_ti_pcie_host_ops = {
> +	.map_bus	= cdns_pci_map_bus,
> +	.read		= cdns_ti_pcie_config_read,
> +	.write		= cdns_ti_pcie_config_write,
> +};
> +
> +static const struct j721e_pcie_data j721e_pcie_rc_data = {
> +	.mode = PCI_MODE_RC,
> +};
> +
> +static const struct j721e_pcie_data j721e_pcie_ep_data = {
> +	.mode = PCI_MODE_EP,
> +};
> +
> +static const struct of_device_id of_j721e_pcie_match[] = {
> +	{
> +		.compatible = "ti,j721e-pcie-host",
> +		.data = &j721e_pcie_rc_data,
> +	},
> +	{
> +		.compatible = "ti,j721e-pcie-ep",
> +		.data = &j721e_pcie_ep_data,
> +	},
> +	{},
> +};
> +
> +static int j721e_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = dev->of_node;
> +	const struct of_device_id *match;
> +	struct pci_host_bridge *bridge;
> +	struct j721e_pcie_data *data;
> +	struct cdns_pcie *cdns_pcie;
> +	struct j721e_pcie *pcie;
> +	struct cdns_pcie_rc *rc;
> +	struct cdns_pcie_ep *ep;
> +	struct gpio_desc *gpiod;
> +	struct resource *res;
> +	void __iomem *base;
> +	u32 num_lanes;
> +	u32 mode;
> +	int ret;
> +
> +	match = of_match_device(of_match_ptr(of_j721e_pcie_match), dev);
> +	if (!match)
> +		return -EINVAL;
> +
> +	data = (struct j721e_pcie_data *)match->data;

I think you can use of_device_get_match_data(dev) here instead.


> +	mode = (u32)data->mode;
> +
> +	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	pcie->dev = dev;
> +	pcie->node = node;
> +	pcie->mode = mode;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "user_cfg");
> +	base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +	pcie->user_cfg_base = base;
> +
> +	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
> +	if (ret || num_lanes > MAX_LANES)
> +		num_lanes = 1;
> +	pcie->num_lanes = num_lanes;
> +
> +	dev_set_drvdata(dev, pcie);
> +	pm_runtime_enable(dev);
> +	ret = pm_runtime_get_sync(dev);
> +	if (ret < 0) {
> +		dev_err(dev, "pm_runtime_get_sync failed\n");
> +		goto err_get_sync;

This means we'll call pm_runtime_put - are you sure you want to do that?

Thanks,

Andrew Murray


> +	}
> +
> +	ret = j721e_pcie_ctrl_init(pcie);
> +	if (ret < 0) {
> +		dev_err(dev, "pm_runtime_get_sync failed\n");
> +		goto err_get_sync;
> +	}
> +
> +	switch (mode) {
> +	case PCI_MODE_RC:
> +		if (!IS_ENABLED(CONFIG_PCIE_CADENCE_HOST)) {
> +			ret = -ENODEV;
> +			goto err_get_sync;
> +		}
> +
> +		bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
> +		if (!bridge) {
> +			ret = -ENOMEM;
> +			goto err_get_sync;
> +		}
> +
> +		bridge->ops = &cdns_ti_pcie_host_ops;
> +		rc = pci_host_bridge_priv(bridge);
> +
> +		cdns_pcie = &rc->pcie;
> +		cdns_pcie->dev = dev;
> +		cdns_pcie->ops = &j721e_ops_ops;
> +		pcie->cdns_pcie = cdns_pcie;
> +
> +		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +		if (IS_ERR(gpiod)) {
> +			ret = PTR_ERR(gpiod);
> +			if (ret != -EPROBE_DEFER)
> +				dev_err(dev, "Failed to get reset GPIO\n");
> +			goto err_get_sync;
> +		}
> +
> +		ret = cdns_pcie_init_phy(dev, cdns_pcie);
> +		if (ret) {
> +			dev_err(dev, "Failed to init phy\n");
> +			goto err_get_sync;
> +		}
> +
> +		/*
> +		 * "Power Sequencing and Reset Signal Timings" table in
> +		 * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 3.0
> +		 * indicates PERST# should be deasserted after minimum of 100us
> +		 * once REFCLK is stable. The REFCLK to the connector in RC
> +		 * mode is selected while enabling the PHY. So deassert PERST#
> +		 * after 100 us.
> +		 */
> +		if (gpiod) {
> +			usleep_range(100, 200);
> +			gpiod_set_value_cansleep(gpiod, 1);
> +		}
> +
> +		ret = cdns_pcie_host_setup(rc);
> +		if (ret < 0)
> +			goto err_pcie_setup;
> +
> +		break;
> +	case PCI_MODE_EP:
> +		if (!IS_ENABLED(CONFIG_PCIE_CADENCE_EP)) {
> +			ret = -ENODEV;
> +			goto err_get_sync;
> +		}
> +
> +		ep = devm_kzalloc(dev, sizeof(*ep), GFP_KERNEL);
> +		if (!ep) {
> +			ret = -ENOMEM;
> +			goto err_get_sync;
> +		}
> +
> +		cdns_pcie = &ep->pcie;
> +		cdns_pcie->dev = dev;
> +		cdns_pcie->ops = &j721e_ops_ops;
> +		pcie->cdns_pcie = cdns_pcie;
> +
> +		ret = cdns_pcie_init_phy(dev, cdns_pcie);
> +		if (ret) {
> +			dev_err(dev, "Failed to init phy\n");
> +			goto err_get_sync;
> +		}
> +
> +		ret = cdns_pcie_ep_setup(ep);
> +		if (ret < 0)
> +			goto err_pcie_setup;
> +
> +		break;
> +	default:
> +		dev_err(dev, "INVALID device type %d\n", mode);
> +	}
> +
> +	return 0;
> +
> +err_pcie_setup:
> +	cdns_pcie_disable_phy(cdns_pcie);
> +
> +err_get_sync:
> +	pm_runtime_put(dev);
> +	pm_runtime_disable(dev);
> +
> +	return ret;
> +}
> +
> +static int j721e_pcie_remove(struct platform_device *pdev)
> +{
> +	struct j721e_pcie *pcie = platform_get_drvdata(pdev);
> +	struct cdns_pcie *cdns_pcie = pcie->cdns_pcie;
> +	struct device *dev = &pdev->dev;
> +
> +	cdns_pcie_disable_phy(cdns_pcie);
> +	pm_runtime_put(dev);
> +	pm_runtime_disable(dev);
> +	of_platform_depopulate(dev);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver j721e_pcie_driver = {
> +	.probe  = j721e_pcie_probe,
> +	.remove = j721e_pcie_remove,
> +	.driver = {
> +		.name	= "j721e-pcie",
> +		.of_match_table = of_j721e_pcie_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +builtin_platform_driver(j721e_pcie_driver);
> -- 
> 2.17.1
>
Bjorn Helgaas Dec. 19, 2019, 10:47 p.m. UTC | #2 
On Mon, Dec 09, 2019 at 02:51:45PM +0530, Kishon Vijay Abraham I wrote:
> Add support for PCIe controller in J721E SoC. The controller uses the
> Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
> will work in both host mode and device mode.
> Some of the features of the controller are:
>   *) Supports both RC mode and EP mode
>   *) Supports MSI and MSI-X support
>   *) Supports upto GEN3 speed mode
>   *) Supports SR-IOV capability
>   *) Ability to route all transactions via SMMU (support will be added
>      in a later patch).
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/pci/controller/cadence/Kconfig     |  23 ++
>  drivers/pci/controller/cadence/Makefile    |   1 +
>  drivers/pci/controller/cadence/pci-j721e.c | 430 +++++++++++++++++++++
>  3 files changed, 454 insertions(+)
>  create mode 100644 drivers/pci/controller/cadence/pci-j721e.c
> 
> diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
> index b76b3cf55ce5..5d30564190e1 100644
> --- a/drivers/pci/controller/cadence/Kconfig
> +++ b/drivers/pci/controller/cadence/Kconfig
> @@ -42,4 +42,27 @@ config PCIE_CADENCE_PLAT_EP
>  	  endpoint mode. This PCIe controller may be embedded into many
>  	  different vendors SoCs.
>  
> +config PCI_J721E
> +	bool
> +
> +config PCI_J721E_HOST
> +	bool "TI J721E PCIe platform host controller"
> +	depends on OF
> +	select PCIE_CADENCE_HOST
> +	select PCI_J721E
> +	help
> +	  Say Y here if you want to support the TI J721E PCIe platform
> +	  controller in host mode. TI J721E PCIe controller uses Cadence PCIe
> +	  core.
> +
> +config PCI_J721E_EP
> +	bool "TI J721E PCIe platform endpoint controller"

Most drivers call these "PCIe host controller" and "PCIe endpoint
controller" or similar.  Does adding "platform" indicate something
useful?

> +	depends on OF
> +	depends on PCI_ENDPOINT
> +	select PCIE_CADENCE_EP
> +	select PCI_J721E
> +	help
> +	  Say Y here if you want to support the TI J721E PCIe platform
> +	  controller in endpoint mode. TI J721E PCIe controller uses Cadence PCIe
> +	  core.
>  endmenu
> diff --git a/drivers/pci/controller/cadence/Makefile b/drivers/pci/controller/cadence/Makefile
> index 232a3f20876a..9bac5fb2f13d 100644
> --- a/drivers/pci/controller/cadence/Makefile
> +++ b/drivers/pci/controller/cadence/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
>  obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
>  obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
>  obj-$(CONFIG_PCIE_CADENCE_PLAT) += pcie-cadence-plat.o
> +obj-$(CONFIG_PCI_J721E) += pci-j721e.o
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> new file mode 100644
> index 000000000000..9ffb7e88c739
> --- /dev/null
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -0,0 +1,430 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * pci-j721e - PCIe controller driver for TI's J721E SoCs
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/io.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +
> +#include "../../pci.h"
> +#include "pcie-cadence.h"
> +
> +#define J721E_PCIE_USER_CMD_STATUS	0x4
> +#define LINK_TRAINING_ENABLE		BIT(0)
> +
> +#define J721E_PCIE_USER_LINKSTATUS	0x14
> +#define LINK_STATUS			GENMASK(1, 0)
> +
> +enum link_status {
> +	NO_RECIEVERS_DETECTED,

s/NO_RECIEVERS_DETECTED/NO_RECEIVERS_DETECTED/

> +	LINK_TRAINING_IN_PROGRESS,
> +	LINK_UP_DL_IN_PROGRESS,
> +	LINK_UP_DL_COMPLETED,
> +};
> +
> +#define J721E_MODE_RC			BIT(7)
> +#define LANE_COUNT_MASK			BIT(8)
> +#define LANE_COUNT(n)			((n) << 8)
> +
> +#define GENERATION_SEL_MASK		GENMASK(1, 0)
> +
> +#define MAX_LANES			2
> +
> +struct j721e_pcie {
> +	struct device		*dev;
> +	struct device_node	*node;
> +	u32			mode;
> +	u32			num_lanes;
> +	struct cdns_pcie	*cdns_pcie;
> +	void __iomem		*user_cfg_base;
> +};
> +
> +enum j721e_pcie_mode {
> +	PCI_MODE_RC,
> +	PCI_MODE_EP,
> +};
> +
> +struct j721e_pcie_data {
> +	enum j721e_pcie_mode	mode;
> +};
> +
> +static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
> +{
> +	return readl(pcie->user_cfg_base + offset);
> +}
> +
> +static inline void j721e_pcie_user_writel(struct j721e_pcie *pcie, u32 offset,
> +					  u32 value)
> +{
> +	writel(value, pcie->user_cfg_base + offset);
> +}
> +
> +static int j721e_pcie_start_link(struct cdns_pcie *cdns_pcie, bool start)
> +{
> +	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
> +	u32 reg;
> +
> +	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_CMD_STATUS);
> +	if (start)
> +		reg |= LINK_TRAINING_ENABLE;
> +	else
> +		reg &= ~LINK_TRAINING_ENABLE;
> +	j721e_pcie_user_writel(pcie, J721E_PCIE_USER_CMD_STATUS, reg);
> +
> +	return 0;
> +}
> +
> +static bool j721e_pcie_is_link_up(struct cdns_pcie *cdns_pcie)

There are many *_pcie_link_up() definitions that looks essentially
like this; maybe this could be simply j721e_pcie_link_up() to match?

> +{
> +	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
> +	u32 reg;
> +
> +	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_LINKSTATUS);
> +	reg &= LINK_STATUS;
> +	if (reg == LINK_UP_DL_COMPLETED)
> +		return true;
> +
> +	return false;
> +}
> +
> +static const struct cdns_pcie_ops j721e_ops_ops = {
> +	.read = cdns_pcie_read32,
> +	.write = cdns_pcie_write32,
> +	.start_link = j721e_pcie_start_link,
> +	.is_link_up = j721e_pcie_is_link_up,
> +};

Can these match struct dw_pcie_ops more closely, e.g., ".link_up"
instead of ".is_link_up", ".start_link" and ".stop_link" instead of
".start_link(..., bool)"?

Bjorn
diff mbox series

Patch

diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
index b76b3cf55ce5..5d30564190e1 100644
--- a/drivers/pci/controller/cadence/Kconfig
+++ b/drivers/pci/controller/cadence/Kconfig
@@ -42,4 +42,27 @@  config PCIE_CADENCE_PLAT_EP
 	  endpoint mode. This PCIe controller may be embedded into many
 	  different vendors SoCs.
 
+config PCI_J721E
+	bool
+
+config PCI_J721E_HOST
+	bool "TI J721E PCIe platform host controller"
+	depends on OF
+	select PCIE_CADENCE_HOST
+	select PCI_J721E
+	help
+	  Say Y here if you want to support the TI J721E PCIe platform
+	  controller in host mode. TI J721E PCIe controller uses Cadence PCIe
+	  core.
+
+config PCI_J721E_EP
+	bool "TI J721E PCIe platform endpoint controller"
+	depends on OF
+	depends on PCI_ENDPOINT
+	select PCIE_CADENCE_EP
+	select PCI_J721E
+	help
+	  Say Y here if you want to support the TI J721E PCIe platform
+	  controller in endpoint mode. TI J721E PCIe controller uses Cadence PCIe
+	  core.
 endmenu
diff --git a/drivers/pci/controller/cadence/Makefile b/drivers/pci/controller/cadence/Makefile
index 232a3f20876a..9bac5fb2f13d 100644
--- a/drivers/pci/controller/cadence/Makefile
+++ b/drivers/pci/controller/cadence/Makefile
@@ -3,3 +3,4 @@  obj-$(CONFIG_PCIE_CADENCE) += pcie-cadence.o
 obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
 obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
 obj-$(CONFIG_PCIE_CADENCE_PLAT) += pcie-cadence-plat.o
+obj-$(CONFIG_PCI_J721E) += pci-j721e.o
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
new file mode 100644
index 000000000000..9ffb7e88c739
--- /dev/null
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -0,0 +1,430 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * pci-j721e - PCIe controller driver for TI's J721E SoCs
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "../../pci.h"
+#include "pcie-cadence.h"
+
+#define J721E_PCIE_USER_CMD_STATUS	0x4
+#define LINK_TRAINING_ENABLE		BIT(0)
+
+#define J721E_PCIE_USER_LINKSTATUS	0x14
+#define LINK_STATUS			GENMASK(1, 0)
+
+enum link_status {
+	NO_RECIEVERS_DETECTED,
+	LINK_TRAINING_IN_PROGRESS,
+	LINK_UP_DL_IN_PROGRESS,
+	LINK_UP_DL_COMPLETED,
+};
+
+#define J721E_MODE_RC			BIT(7)
+#define LANE_COUNT_MASK			BIT(8)
+#define LANE_COUNT(n)			((n) << 8)
+
+#define GENERATION_SEL_MASK		GENMASK(1, 0)
+
+#define MAX_LANES			2
+
+struct j721e_pcie {
+	struct device		*dev;
+	struct device_node	*node;
+	u32			mode;
+	u32			num_lanes;
+	struct cdns_pcie	*cdns_pcie;
+	void __iomem		*user_cfg_base;
+};
+
+enum j721e_pcie_mode {
+	PCI_MODE_RC,
+	PCI_MODE_EP,
+};
+
+struct j721e_pcie_data {
+	enum j721e_pcie_mode	mode;
+};
+
+static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
+{
+	return readl(pcie->user_cfg_base + offset);
+}
+
+static inline void j721e_pcie_user_writel(struct j721e_pcie *pcie, u32 offset,
+					  u32 value)
+{
+	writel(value, pcie->user_cfg_base + offset);
+}
+
+static int j721e_pcie_start_link(struct cdns_pcie *cdns_pcie, bool start)
+{
+	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+	u32 reg;
+
+	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_CMD_STATUS);
+	if (start)
+		reg |= LINK_TRAINING_ENABLE;
+	else
+		reg &= ~LINK_TRAINING_ENABLE;
+	j721e_pcie_user_writel(pcie, J721E_PCIE_USER_CMD_STATUS, reg);
+
+	return 0;
+}
+
+static bool j721e_pcie_is_link_up(struct cdns_pcie *cdns_pcie)
+{
+	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+	u32 reg;
+
+	reg = j721e_pcie_user_readl(pcie, J721E_PCIE_USER_LINKSTATUS);
+	reg &= LINK_STATUS;
+	if (reg == LINK_UP_DL_COMPLETED)
+		return true;
+
+	return false;
+}
+
+static const struct cdns_pcie_ops j721e_ops_ops = {
+	.read = cdns_pcie_read32,
+	.write = cdns_pcie_write32,
+	.start_link = j721e_pcie_start_link,
+	.is_link_up = j721e_pcie_is_link_up,
+};
+
+static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
+{
+	struct device *dev = pcie->dev;
+	u32 mask = J721E_MODE_RC;
+	u32 mode = pcie->mode;
+	u32 val = 0;
+	int ret = 0;
+
+	if (mode == PCI_MODE_RC)
+		val = J721E_MODE_RC;
+
+	ret = regmap_update_bits(syscon, 0, mask, val);
+	if (ret)
+		dev_err(dev, "failed to set pcie mode\n");
+
+	return ret;
+}
+
+static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
+				     struct regmap *syscon)
+{
+	struct device *dev = pcie->dev;
+	struct device_node *np = dev->of_node;
+	int link_speed;
+	u32 val = 0;
+	int ret;
+
+	link_speed = of_pci_get_max_link_speed(np);
+	if (link_speed < 2)
+		link_speed = 2;
+
+	val = link_speed - 1;
+	ret = regmap_update_bits(syscon, 0, GENERATION_SEL_MASK, val);
+	if (ret)
+		dev_err(dev, "failed to set link speed\n");
+
+	return ret;
+}
+
+static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
+				     struct regmap *syscon)
+{
+	struct device *dev = pcie->dev;
+	u32 lanes = pcie->num_lanes;
+	u32 val = 0;
+	int ret;
+
+	val = LANE_COUNT(lanes - 1);
+	ret = regmap_update_bits(syscon, 0, LANE_COUNT_MASK, val);
+	if (ret)
+		dev_err(dev, "failed to set link count\n");
+
+	return ret;
+}
+
+static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	struct device_node *node = dev->of_node;
+	struct regmap *syscon;
+	int ret;
+
+	syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-pcie-ctrl");
+	if (IS_ERR(syscon)) {
+		dev_err(dev, "Unable to get ti,syscon-pcie-ctrl regmap\n");
+		return PTR_ERR(syscon);
+	}
+
+	ret = j721e_pcie_set_mode(pcie, syscon);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set pci mode\n");
+		return ret;
+	}
+
+	ret = j721e_pcie_set_link_speed(pcie, syscon);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set link speed\n");
+		return ret;
+	}
+
+	ret = j721e_pcie_set_lane_count(pcie, syscon);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set num-lanes\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cdns_ti_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 *value)
+{
+	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
+	unsigned int busn = bus->number;
+
+	if (busn == rc->bus_range->start)
+		return pci_generic_config_read32(bus, devfn, where, size,
+						 value);
+
+	return pci_generic_config_read(bus, devfn, where, size, value);
+}
+
+static int cdns_ti_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
+				     int where, int size, u32 value)
+{
+	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+	struct cdns_pcie_rc *rc = pci_host_bridge_priv(bridge);
+	unsigned int busn = bus->number;
+
+	if (busn == rc->bus_range->start)
+		return pci_generic_config_write32(bus, devfn, where, size,
+						  value);
+
+	return pci_generic_config_write(bus, devfn, where, size, value);
+}
+
+static struct pci_ops cdns_ti_pcie_host_ops = {
+	.map_bus	= cdns_pci_map_bus,
+	.read		= cdns_ti_pcie_config_read,
+	.write		= cdns_ti_pcie_config_write,
+};
+
+static const struct j721e_pcie_data j721e_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+};
+
+static const struct j721e_pcie_data j721e_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+};
+
+static const struct of_device_id of_j721e_pcie_match[] = {
+	{
+		.compatible = "ti,j721e-pcie-host",
+		.data = &j721e_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,j721e-pcie-ep",
+		.data = &j721e_pcie_ep_data,
+	},
+	{},
+};
+
+static int j721e_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	const struct of_device_id *match;
+	struct pci_host_bridge *bridge;
+	struct j721e_pcie_data *data;
+	struct cdns_pcie *cdns_pcie;
+	struct j721e_pcie *pcie;
+	struct cdns_pcie_rc *rc;
+	struct cdns_pcie_ep *ep;
+	struct gpio_desc *gpiod;
+	struct resource *res;
+	void __iomem *base;
+	u32 num_lanes;
+	u32 mode;
+	int ret;
+
+	match = of_match_device(of_match_ptr(of_j721e_pcie_match), dev);
+	if (!match)
+		return -EINVAL;
+
+	data = (struct j721e_pcie_data *)match->data;
+	mode = (u32)data->mode;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pcie->dev = dev;
+	pcie->node = node;
+	pcie->mode = mode;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "user_cfg");
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+	pcie->user_cfg_base = base;
+
+	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
+	if (ret || num_lanes > MAX_LANES)
+		num_lanes = 1;
+	pcie->num_lanes = num_lanes;
+
+	dev_set_drvdata(dev, pcie);
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync failed\n");
+		goto err_get_sync;
+	}
+
+	ret = j721e_pcie_ctrl_init(pcie);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync failed\n");
+		goto err_get_sync;
+	}
+
+	switch (mode) {
+	case PCI_MODE_RC:
+		if (!IS_ENABLED(CONFIG_PCIE_CADENCE_HOST)) {
+			ret = -ENODEV;
+			goto err_get_sync;
+		}
+
+		bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
+		if (!bridge) {
+			ret = -ENOMEM;
+			goto err_get_sync;
+		}
+
+		bridge->ops = &cdns_ti_pcie_host_ops;
+		rc = pci_host_bridge_priv(bridge);
+
+		cdns_pcie = &rc->pcie;
+		cdns_pcie->dev = dev;
+		cdns_pcie->ops = &j721e_ops_ops;
+		pcie->cdns_pcie = cdns_pcie;
+
+		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(gpiod)) {
+			ret = PTR_ERR(gpiod);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get reset GPIO\n");
+			goto err_get_sync;
+		}
+
+		ret = cdns_pcie_init_phy(dev, cdns_pcie);
+		if (ret) {
+			dev_err(dev, "Failed to init phy\n");
+			goto err_get_sync;
+		}
+
+		/*
+		 * "Power Sequencing and Reset Signal Timings" table in
+		 * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 3.0
+		 * indicates PERST# should be deasserted after minimum of 100us
+		 * once REFCLK is stable. The REFCLK to the connector in RC
+		 * mode is selected while enabling the PHY. So deassert PERST#
+		 * after 100 us.
+		 */
+		if (gpiod) {
+			usleep_range(100, 200);
+			gpiod_set_value_cansleep(gpiod, 1);
+		}
+
+		ret = cdns_pcie_host_setup(rc);
+		if (ret < 0)
+			goto err_pcie_setup;
+
+		break;
+	case PCI_MODE_EP:
+		if (!IS_ENABLED(CONFIG_PCIE_CADENCE_EP)) {
+			ret = -ENODEV;
+			goto err_get_sync;
+		}
+
+		ep = devm_kzalloc(dev, sizeof(*ep), GFP_KERNEL);
+		if (!ep) {
+			ret = -ENOMEM;
+			goto err_get_sync;
+		}
+
+		cdns_pcie = &ep->pcie;
+		cdns_pcie->dev = dev;
+		cdns_pcie->ops = &j721e_ops_ops;
+		pcie->cdns_pcie = cdns_pcie;
+
+		ret = cdns_pcie_init_phy(dev, cdns_pcie);
+		if (ret) {
+			dev_err(dev, "Failed to init phy\n");
+			goto err_get_sync;
+		}
+
+		ret = cdns_pcie_ep_setup(ep);
+		if (ret < 0)
+			goto err_pcie_setup;
+
+		break;
+	default:
+		dev_err(dev, "INVALID device type %d\n", mode);
+	}
+
+	return 0;
+
+err_pcie_setup:
+	cdns_pcie_disable_phy(cdns_pcie);
+
+err_get_sync:
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int j721e_pcie_remove(struct platform_device *pdev)
+{
+	struct j721e_pcie *pcie = platform_get_drvdata(pdev);
+	struct cdns_pcie *cdns_pcie = pcie->cdns_pcie;
+	struct device *dev = &pdev->dev;
+
+	cdns_pcie_disable_phy(cdns_pcie);
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+	of_platform_depopulate(dev);
+
+	return 0;
+}
+
+static struct platform_driver j721e_pcie_driver = {
+	.probe  = j721e_pcie_probe,
+	.remove = j721e_pcie_remove,
+	.driver = {
+		.name	= "j721e-pcie",
+		.of_match_table = of_j721e_pcie_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(j721e_pcie_driver);