| Message ID | 20200224232126.3385250-2-sebastian.reichel@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel | expand |
Hi Sebastian, Thank you for the patch. On Tue, Feb 25, 2020 at 12:20:31AM +0100, Sebastian Reichel wrote: > The standard binding for DSI requires, that the channel number > of the panel is encoded in DT. This adds the channel number in > all OMAP3-5 boards, in preparation for using common infrastructure. > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> > --- > .../devicetree/bindings/display/panel/panel-dsi-cm.txt | 4 +++- > arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++- > arch/arm/boot/dts/omap3-n950.dts | 3 ++- > arch/arm/boot/dts/omap3.dtsi | 3 +++ > arch/arm/boot/dts/omap4-sdp.dts | 6 ++++-- > arch/arm/boot/dts/omap4.dtsi | 6 ++++++ > arch/arm/boot/dts/omap5.dtsi | 6 ++++++ > 7 files changed, 26 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > index dce48eb9db57..f92d5c9adfc5 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > @@ -3,6 +3,7 @@ Generic MIPI DSI Command Mode Panel > > Required properties: > - compatible: "panel-dsi-cm" > +- reg: DSI channel number > > Optional properties: > - label: a symbolic name for the panel > @@ -15,9 +16,10 @@ Required nodes: > Example > ------- > > -lcd0: display { > +lcd0: panel@0 { > compatible = "tpo,taal", "panel-dsi-cm"; > label = "lcd0"; > + reg = <0>; > > reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; > While at it, how about converting this to yaml ? > diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi > index 85665506f4f8..a5e4ba7c8dab 100644 > --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi > +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi > @@ -199,8 +199,9 @@ dsi1_out_ep: endpoint { > }; > }; > > - lcd0: display { > + lcd0: panel@0 { > compatible = "panel-dsi-cm"; > + reg = <0>; > label = "lcd0"; > vddi-supply = <&lcd_regulator>; > reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ > diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts > index 31d47a1fad84..80cf4e1177da 100644 > --- a/arch/arm/boot/dts/omap3-n950.dts > +++ b/arch/arm/boot/dts/omap3-n950.dts > @@ -225,8 +225,9 @@ dsi_out_ep: endpoint { > }; > }; > > - lcd0: display { > + lcd0: panel@0 { > compatible = "nokia,himalaya", "panel-dsi-cm"; > + reg = <0>; > label = "lcd0"; > > pinctrl-names = "default"; > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi > index 634ea16a711e..409d434a9b18 100644 > --- a/arch/arm/boot/dts/omap3.dtsi > +++ b/arch/arm/boot/dts/omap3.dtsi > @@ -820,6 +820,9 @@ dsi: encoder@4804fc00 { > ti,hwmods = "dss_dsi1"; > clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > rfbi: encoder@48050800 { > diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts > index 91480ac1f328..8a8307517dab 100644 > --- a/arch/arm/boot/dts/omap4-sdp.dts > +++ b/arch/arm/boot/dts/omap4-sdp.dts > @@ -662,8 +662,9 @@ dsi1_out_ep: endpoint { > }; > }; > > - lcd0: display { > + lcd0: panel@0 { > compatible = "tpo,taal", "panel-dsi-cm"; > + reg = <0>; > label = "lcd0"; > > reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ > @@ -687,8 +688,9 @@ dsi2_out_ep: endpoint { > }; > }; > > - lcd1: display { > + lcd1: panel@0 { > compatible = "tpo,taal", "panel-dsi-cm"; > + reg = <0>; > label = "lcd1"; > > reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ > diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi > index 9a87440d0b9d..a75734065cac 100644 > --- a/arch/arm/boot/dts/omap4.dtsi > +++ b/arch/arm/boot/dts/omap4.dtsi > @@ -465,6 +465,9 @@ dsi1: encoder@58004000 { > clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, > <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > dsi2: encoder@58005000 { > @@ -479,6 +482,9 @@ dsi2: encoder@58005000 { > clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, > <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > hdmi: encoder@58006000 { > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index d0ecf54d5a23..5c7462e04716 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -333,6 +333,9 @@ dsi1: encoder@58004000 { > clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, > <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > dsi2: encoder@58005000 { > @@ -347,6 +350,9 @@ dsi2: encoder@58005000 { > clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, > <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > hdmi: encoder@58060000 {
Hi Laurent, On Tue, Feb 25, 2020 at 01:38:21AM +0200, Laurent Pinchart wrote: > Hi Sebastian, > > Thank you for the patch. > > On Tue, Feb 25, 2020 at 12:20:31AM +0100, Sebastian Reichel wrote: > > The standard binding for DSI requires, that the channel number > > of the panel is encoded in DT. This adds the channel number in > > all OMAP3-5 boards, in preparation for using common infrastructure. > > > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> > > --- > > .../devicetree/bindings/display/panel/panel-dsi-cm.txt | 4 +++- > > arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++- > > arch/arm/boot/dts/omap3-n950.dts | 3 ++- > > arch/arm/boot/dts/omap3.dtsi | 3 +++ > > arch/arm/boot/dts/omap4-sdp.dts | 6 ++++-- > > arch/arm/boot/dts/omap4.dtsi | 6 ++++++ > > arch/arm/boot/dts/omap5.dtsi | 6 ++++++ > > 7 files changed, 26 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > > index dce48eb9db57..f92d5c9adfc5 100644 > > --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > > +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > > @@ -3,6 +3,7 @@ Generic MIPI DSI Command Mode Panel > > > > Required properties: > > - compatible: "panel-dsi-cm" > > +- reg: DSI channel number > > > > Optional properties: > > - label: a symbolic name for the panel > > @@ -15,9 +16,10 @@ Required nodes: > > Example > > ------- > > > > -lcd0: display { > > +lcd0: panel@0 { > > compatible = "tpo,taal", "panel-dsi-cm"; > > label = "lcd0"; > > + reg = <0>; > > > > reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; > > > > While at it, how about converting this to yaml ? Ack. I was waiting for the dsi-controller YAML bindings to land, which has happened in the meantime. I think it's better to do this in a separate patch though, so that this one can easily be backported. -- Sebastian > > diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi > > index 85665506f4f8..a5e4ba7c8dab 100644 > > --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi > > +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi > > @@ -199,8 +199,9 @@ dsi1_out_ep: endpoint { > > }; > > }; > > > > - lcd0: display { > > + lcd0: panel@0 { > > compatible = "panel-dsi-cm"; > > + reg = <0>; > > label = "lcd0"; > > vddi-supply = <&lcd_regulator>; > > reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ > > diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts > > index 31d47a1fad84..80cf4e1177da 100644 > > --- a/arch/arm/boot/dts/omap3-n950.dts > > +++ b/arch/arm/boot/dts/omap3-n950.dts > > @@ -225,8 +225,9 @@ dsi_out_ep: endpoint { > > }; > > }; > > > > - lcd0: display { > > + lcd0: panel@0 { > > compatible = "nokia,himalaya", "panel-dsi-cm"; > > + reg = <0>; > > label = "lcd0"; > > > > pinctrl-names = "default"; > > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi > > index 634ea16a711e..409d434a9b18 100644 > > --- a/arch/arm/boot/dts/omap3.dtsi > > +++ b/arch/arm/boot/dts/omap3.dtsi > > @@ -820,6 +820,9 @@ dsi: encoder@4804fc00 { > > ti,hwmods = "dss_dsi1"; > > clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; > > clock-names = "fck", "sys_clk"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > }; > > > > rfbi: encoder@48050800 { > > diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts > > index 91480ac1f328..8a8307517dab 100644 > > --- a/arch/arm/boot/dts/omap4-sdp.dts > > +++ b/arch/arm/boot/dts/omap4-sdp.dts > > @@ -662,8 +662,9 @@ dsi1_out_ep: endpoint { > > }; > > }; > > > > - lcd0: display { > > + lcd0: panel@0 { > > compatible = "tpo,taal", "panel-dsi-cm"; > > + reg = <0>; > > label = "lcd0"; > > > > reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ > > @@ -687,8 +688,9 @@ dsi2_out_ep: endpoint { > > }; > > }; > > > > - lcd1: display { > > + lcd1: panel@0 { > > compatible = "tpo,taal", "panel-dsi-cm"; > > + reg = <0>; > > label = "lcd1"; > > > > reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ > > diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi > > index 9a87440d0b9d..a75734065cac 100644 > > --- a/arch/arm/boot/dts/omap4.dtsi > > +++ b/arch/arm/boot/dts/omap4.dtsi > > @@ -465,6 +465,9 @@ dsi1: encoder@58004000 { > > clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, > > <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; > > clock-names = "fck", "sys_clk"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > }; > > > > dsi2: encoder@58005000 { > > @@ -479,6 +482,9 @@ dsi2: encoder@58005000 { > > clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, > > <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; > > clock-names = "fck", "sys_clk"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > }; > > > > hdmi: encoder@58006000 { > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > > index d0ecf54d5a23..5c7462e04716 100644 > > --- a/arch/arm/boot/dts/omap5.dtsi > > +++ b/arch/arm/boot/dts/omap5.dtsi > > @@ -333,6 +333,9 @@ dsi1: encoder@58004000 { > > clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, > > <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; > > clock-names = "fck", "sys_clk"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > }; > > > > dsi2: encoder@58005000 { > > @@ -347,6 +350,9 @@ dsi2: encoder@58005000 { > > clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, > > <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; > > clock-names = "fck", "sys_clk"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > }; > > > > hdmi: encoder@58060000 { > > -- > Regards, > > Laurent Pinchart
Hi Sebastian. On Tue, Feb 25, 2020 at 12:20:31AM +0100, Sebastian Reichel wrote: > The standard binding for DSI requires, that the channel number > of the panel is encoded in DT. This adds the channel number in > all OMAP3-5 boards, in preparation for using common infrastructure. > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> > --- > .../devicetree/bindings/display/panel/panel-dsi-cm.txt | 4 +++- > arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++- > arch/arm/boot/dts/omap3-n950.dts | 3 ++- > arch/arm/boot/dts/omap3.dtsi | 3 +++ > arch/arm/boot/dts/omap4-sdp.dts | 6 ++++-- > arch/arm/boot/dts/omap4.dtsi | 6 ++++++ > arch/arm/boot/dts/omap5.dtsi | 6 ++++++ > 7 files changed, 26 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > index dce48eb9db57..f92d5c9adfc5 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt > @@ -3,6 +3,7 @@ Generic MIPI DSI Command Mode Panel > > Required properties: > - compatible: "panel-dsi-cm" It is not direct related to this patch - but you touch the file... This binding should require a specific + a generic binding. So any panel that in the beginng can fallback only on the generic handling can later fallback to some panel specific quirks. This is easy to express in .yaml format like this: properties: compatible: description: Shall contain a panel specific compatible and "panel-dps-cm" in that order. items: - {} - const: panel-dsi-cm This will not prevent a user from using: compatible: "foo,bar","panel-dsi-cm" But then there is documentation for a specific compatible. On top of this - no changes to .txt files in panel/ You need to convert to DT Schema and then patch the binding. (Not a global fixed rule - but something I try to enforce to get the rest converted). Sam > +- reg: DSI channel number > > Optional properties: > - label: a symbolic name for the panel > @@ -15,9 +16,10 @@ Required nodes: > Example > ------- > > -lcd0: display { > +lcd0: panel@0 { > compatible = "tpo,taal", "panel-dsi-cm"; > label = "lcd0"; > + reg = <0>; > > reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; > > diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi > index 85665506f4f8..a5e4ba7c8dab 100644 > --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi > +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi > @@ -199,8 +199,9 @@ dsi1_out_ep: endpoint { > }; > }; > > - lcd0: display { > + lcd0: panel@0 { > compatible = "panel-dsi-cm"; > + reg = <0>; > label = "lcd0"; > vddi-supply = <&lcd_regulator>; > reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ > diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts > index 31d47a1fad84..80cf4e1177da 100644 > --- a/arch/arm/boot/dts/omap3-n950.dts > +++ b/arch/arm/boot/dts/omap3-n950.dts > @@ -225,8 +225,9 @@ dsi_out_ep: endpoint { > }; > }; > > - lcd0: display { > + lcd0: panel@0 { > compatible = "nokia,himalaya", "panel-dsi-cm"; > + reg = <0>; > label = "lcd0"; > > pinctrl-names = "default"; > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi > index 634ea16a711e..409d434a9b18 100644 > --- a/arch/arm/boot/dts/omap3.dtsi > +++ b/arch/arm/boot/dts/omap3.dtsi > @@ -820,6 +820,9 @@ dsi: encoder@4804fc00 { > ti,hwmods = "dss_dsi1"; > clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > rfbi: encoder@48050800 { > diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts > index 91480ac1f328..8a8307517dab 100644 > --- a/arch/arm/boot/dts/omap4-sdp.dts > +++ b/arch/arm/boot/dts/omap4-sdp.dts > @@ -662,8 +662,9 @@ dsi1_out_ep: endpoint { > }; > }; > > - lcd0: display { > + lcd0: panel@0 { > compatible = "tpo,taal", "panel-dsi-cm"; > + reg = <0>; > label = "lcd0"; > > reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ > @@ -687,8 +688,9 @@ dsi2_out_ep: endpoint { > }; > }; > > - lcd1: display { > + lcd1: panel@0 { > compatible = "tpo,taal", "panel-dsi-cm"; > + reg = <0>; > label = "lcd1"; > > reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ > diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi > index 9a87440d0b9d..a75734065cac 100644 > --- a/arch/arm/boot/dts/omap4.dtsi > +++ b/arch/arm/boot/dts/omap4.dtsi > @@ -465,6 +465,9 @@ dsi1: encoder@58004000 { > clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, > <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > dsi2: encoder@58005000 { > @@ -479,6 +482,9 @@ dsi2: encoder@58005000 { > clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, > <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > hdmi: encoder@58006000 { > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index d0ecf54d5a23..5c7462e04716 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -333,6 +333,9 @@ dsi1: encoder@58004000 { > clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, > <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > dsi2: encoder@58005000 { > @@ -347,6 +350,9 @@ dsi2: encoder@58005000 { > clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, > <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; > clock-names = "fck", "sys_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > }; > > hdmi: encoder@58060000 { > -- > 2.25.0 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt index dce48eb9db57..f92d5c9adfc5 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt @@ -3,6 +3,7 @@ Generic MIPI DSI Command Mode Panel Required properties: - compatible: "panel-dsi-cm" +- reg: DSI channel number Optional properties: - label: a symbolic name for the panel @@ -15,9 +16,10 @@ Required nodes: Example ------- -lcd0: display { +lcd0: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; label = "lcd0"; + reg = <0>; reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 85665506f4f8..a5e4ba7c8dab 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -199,8 +199,9 @@ dsi1_out_ep: endpoint { }; }; - lcd0: display { + lcd0: panel@0 { compatible = "panel-dsi-cm"; + reg = <0>; label = "lcd0"; vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 31d47a1fad84..80cf4e1177da 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -225,8 +225,9 @@ dsi_out_ep: endpoint { }; }; - lcd0: display { + lcd0: panel@0 { compatible = "nokia,himalaya", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 634ea16a711e..409d434a9b18 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -820,6 +820,9 @@ dsi: encoder@4804fc00 { ti,hwmods = "dss_dsi1"; clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; rfbi: encoder@48050800 { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 91480ac1f328..8a8307517dab 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -662,8 +662,9 @@ dsi1_out_ep: endpoint { }; }; - lcd0: display { + lcd0: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ @@ -687,8 +688,9 @@ dsi2_out_ep: endpoint { }; }; - lcd1: display { + lcd1: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd1"; reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 9a87440d0b9d..a75734065cac 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -465,6 +465,9 @@ dsi1: encoder@58004000 { clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; dsi2: encoder@58005000 { @@ -479,6 +482,9 @@ dsi2: encoder@58005000 { clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; hdmi: encoder@58006000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index d0ecf54d5a23..5c7462e04716 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -333,6 +333,9 @@ dsi1: encoder@58004000 { clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; dsi2: encoder@58005000 { @@ -347,6 +350,9 @@ dsi2: encoder@58005000 { clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; hdmi: encoder@58060000 {
The standard binding for DSI requires, that the channel number of the panel is encoded in DT. This adds the channel number in all OMAP3-5 boards, in preparation for using common infrastructure. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- .../devicetree/bindings/display/panel/panel-dsi-cm.txt | 4 +++- arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++- arch/arm/boot/dts/omap3-n950.dts | 3 ++- arch/arm/boot/dts/omap3.dtsi | 3 +++ arch/arm/boot/dts/omap4-sdp.dts | 6 ++++-- arch/arm/boot/dts/omap4.dtsi | 6 ++++++ arch/arm/boot/dts/omap5.dtsi | 6 ++++++ 7 files changed, 26 insertions(+), 5 deletions(-)