| Message ID | 20200512214713.40501-5-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | n_gsm serdev support and GNSS driver for droid4 | expand |
On Tue, May 12, 2020 at 02:47:11PM -0700, Tony Lindgren wrote: > We can have a generic serdev-ngsm driver bring up the TS 27.010 line > discipline on the selected serial ports based on device tree data. > > And we can now do standard Linux device driver for the dedicated > TS 27.010 channels for devices like GNSS and ALSA found on modems. > > Tested-by: Pavel Machek <pavel@ucw.cz> > Reviewed-by: Pavel Machek <pavel@ucw.cz> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > drivers/tty/serdev/Kconfig | 10 + > drivers/tty/serdev/Makefile | 1 + > drivers/tty/serdev/serdev-ngsm.c | 449 +++++++++++++++++++++++++++++++ The n in n_gsm indicates that its a line discipline so doesn't really make sense here. How about just calling the driver something like gsm0710.c, gsmmux.c, or gsm_serdev.c if you really want to include the interface in the name? As it's a tty driver I think it should live in drivers/tty (tty/serdev is for serdev core and serdev controllers). And I think this one should be merged with the patch adding functions to n_gsm that you depend on (and there shouldn't be a need to export those functions globally). > include/linux/serdev-gsm.h | 11 + > 4 files changed, 471 insertions(+) > create mode 100644 drivers/tty/serdev/serdev-ngsm.c > > diff --git a/drivers/tty/serdev/Kconfig b/drivers/tty/serdev/Kconfig > --- a/drivers/tty/serdev/Kconfig > +++ b/drivers/tty/serdev/Kconfig > @@ -22,4 +22,14 @@ config SERIAL_DEV_CTRL_TTYPORT > depends on SERIAL_DEV_BUS != m > default y > > +config SERIAL_DEV_N_GSM > + tristate "Serial device TS 27.010 support" > + depends on N_GSM > + depends on SERIAL_DEV_CTRL_TTYPORT > + help > + Select this if you want to use the TS 27.010 with a serial port with > + devices such as modems and GNSS devices. > + > + If unsure, say N. > + > endif > diff --git a/drivers/tty/serdev/Makefile b/drivers/tty/serdev/Makefile > --- a/drivers/tty/serdev/Makefile > +++ b/drivers/tty/serdev/Makefile > @@ -4,3 +4,4 @@ serdev-objs := core.o > obj-$(CONFIG_SERIAL_DEV_BUS) += serdev.o > > obj-$(CONFIG_SERIAL_DEV_CTRL_TTYPORT) += serdev-ttyport.o > +obj-$(CONFIG_SERIAL_DEV_N_GSM) += serdev-ngsm.o > diff --git a/drivers/tty/serdev/serdev-ngsm.c b/drivers/tty/serdev/serdev-ngsm.c > new file mode 100644 > --- /dev/null > +++ b/drivers/tty/serdev/serdev-ngsm.c > @@ -0,0 +1,449 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Generic TS 27.010 serial line discipline serdev driver > + * Copyright (C) 2020 Tony Lindgren <tony@atomide.com> > + */ > + > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > +#include <linux/serdev.h> > +#include <linux/serdev-gsm.h> > + > +#include <linux/phy/phy.h> > + > +#include <uapi/linux/gsmmux.h> > + > +#define TS27010_C_N2 3 /* TS 27.010 default value */ > +#define TS27010_RESERVED_DLCI (BIT_ULL(63) | BIT_ULL(62) | BIT_ULL(0)) > + > +struct serdev_ngsm_cfg { > + const struct gsm_config *gsm; > + unsigned int init_retry_quirk:1; > + unsigned int needs_usb_phy:1; > + unsigned int aggressive_pm:1; > + int (*init)(struct serdev_device *serdev); /* for device quirks */ > +}; > + > +struct serdev_ngsm { > + struct device *dev; > + struct gsm_serdev gsd; > + struct phy *phy; > + u32 baudrate; > + DECLARE_BITMAP(ttymask, 64); > + const struct serdev_ngsm_cfg *cfg; > +}; > + > +static int serdev_ngsm_tty_init(struct serdev_ngsm *ddata) > +{ > + struct gsm_serdev *gsd = &ddata->gsd; > + struct device *dev = ddata->dev; > + int bit, err; > + > + for_each_set_bit(bit, ddata->ttymask, 64) { > + if (BIT_ULL(bit) & TS27010_RESERVED_DLCI) > + continue; > + > + err = gsm_serdev_register_tty_port(gsd, bit); > + if (err) { > + dev_err(dev, "ngsm tty init failed for dlci%i: %i\n", > + bit, err); > + return err; > + } > + } > + > + return 0; > +} > + > +static void serdev_ngsm_tty_exit(struct serdev_ngsm *ddata) > +{ > + struct gsm_serdev *gsd = &ddata->gsd; > + int bit; > + > + for_each_set_bit(bit, ddata->ttymask, 64) { > + if (BIT_ULL(bit) & TS27010_RESERVED_DLCI) > + continue; > + > + gsm_serdev_unregister_tty_port(gsd, bit); > + } > +} > + > +/* > + * Note that we rely on gsm_serdev_register_dlci() locking for > + * reserved channels that serdev_ngsm_tty_init() and consumer > + * drivers may have already reserved. > + */ > +int serdev_ngsm_register_dlci(struct device *dev, > + struct gsm_serdev_dlci *dlci) > +{ > + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); > + struct gsm_serdev *gsd = &ddata->gsd; > + int err; > + > + err = gsm_serdev_register_dlci(gsd, dlci); > + if (err) > + return err; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(serdev_ngsm_register_dlci); > + > +void serdev_ngsm_unregister_dlci(struct device *dev, > + struct gsm_serdev_dlci *dlci) > +{ > + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); > + struct gsm_serdev *gsd = &ddata->gsd; > + > + gsm_serdev_unregister_dlci(gsd, dlci); > +} > +EXPORT_SYMBOL_GPL(serdev_ngsm_unregister_dlci); > + > +int serdev_ngsm_write(struct device *dev, struct gsm_serdev_dlci *ops, > + const u8 *buf, int len) > +{ > + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); > + struct gsm_serdev *gsd = &ddata->gsd; > + int ret; > + > + ret = pm_runtime_get_sync(dev); > + if ((ret != -EINPROGRESS) && ret < 0) { > + pm_runtime_put_noidle(dev); > + > + return ret; > + } > + > + ret = gsm_serdev_write(gsd, ops, buf, len); > + > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_autosuspend(dev); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(serdev_ngsm_write); These three shouldn't be needed with proper serdev child devices. > + > +static int serdev_ngsm_set_config(struct device *dev) > +{ > + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); > + struct gsm_serdev *gsd = &ddata->gsd; > + struct gsm_config c; > + int err, n2; > + > + memcpy(&c, ddata->cfg->gsm, sizeof(c)); > + > + if (ddata->cfg->init_retry_quirk) { > + n2 = c.n2; > + c.n2 *= 10; > + err = gsm_serdev_set_config(gsd, &c); > + if (err) > + return err; > + > + msleep(5000); > + c.n2 = n2; > + } > + > + err = gsm_serdev_set_config(gsd, &c); > + if (err) > + return err; > + > + return 0; > +} > + > +static int serdev_ngsm_output(struct gsm_serdev *gsd, u8 *data, int len) > +{ > + struct serdev_device *serdev = gsd->serdev; > + struct device *dev = &serdev->dev; > + int err; > + > + err = pm_runtime_get(dev); > + if ((err != -EINPROGRESS) && err < 0) { > + pm_runtime_put_noidle(dev); > + > + return err; > + } > + > + serdev_device_write_buf(serdev, data, len); > + > + pm_runtime_put(dev); > + > + return len; > +} > + > +static int serdev_ngsm_runtime_suspend(struct device *dev) > +{ > + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); > + int err; > + > + if (ddata->cfg->needs_usb_phy) { > + err = phy_pm_runtime_put(ddata->phy); > + if (err < 0) { > + dev_warn(dev, "%s: phy_pm_runtime_put: %i\n", > + __func__, err); No need to include __func__ here; I'd spell out what went wrong instead of relying on a function name (e.g. "failed to suspend phy: %d\n"); > + > + return err; > + } > + } > + > + return 0; > +} > + > +static int serdev_ngsm_runtime_resume(struct device *dev) > +{ > + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); > + int err; > + > + if (ddata->cfg->needs_usb_phy) { > + err = phy_pm_runtime_get_sync(ddata->phy); > + if (err < 0) { > + dev_warn(dev, "%s: phy_pm_runtime_get: %i\n", > + __func__, err); > + > + return err; > + } > + } > + > + gsm_serdev_data_kick(&ddata->gsd); > + > + return 0; > +} > + > +static const struct dev_pm_ops serdev_ngsm_pm_ops = { > + SET_RUNTIME_PM_OPS(serdev_ngsm_runtime_suspend, > + serdev_ngsm_runtime_resume, > + NULL) > +}; > + > +/* > + * At least Motorola MDM6600 devices have GPIO wake pins shared between the > + * USB PHY and the TS 27.010 interface. So for PM, we need to use the calls > + * for phy_pm_runtime. Otherwise the modem won't respond to anything on the > + * UART and will never idle either. > + */ > +static int serdev_ngsm_phy_init(struct device *dev) > +{ > + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); > + int err; > + > + if (!ddata->cfg->needs_usb_phy) > + return 0; > + > + ddata->phy = devm_of_phy_get(dev, dev->of_node, NULL); > + if (IS_ERR(ddata->phy)) { > + err = PTR_ERR(ddata->phy); > + if (err != -EPROBE_DEFER) > + dev_err(dev, "%s: phy error: %i\n", __func__, err); "failed to lookup phy: %d"? > + > + return err; > + } > + > + return 0; > +} > + > +/* > + * Configure SoC 8250 device for 700 ms autosuspend delay, Values around 600 ms > + * and shorter cause spurious wake-up events at least on Droid 4. Also keep the > + * SoC 8250 device active during use because of the OOB GPIO wake-up signaling > + * shared with USB PHY. > + */ > +static int motmdm_init(struct serdev_device *serdev) > +{ > + pm_runtime_set_autosuspend_delay(serdev->ctrl->dev.parent, 700); > + pm_suspend_ignore_children(&serdev->ctrl->dev, false); > + > + return 0; > +} > + > +static const struct gsm_config adaption1 = { > + .i = 1, /* 1 = UIH, 2 = UI */ > + .initiator = 1, > + .encapsulation = 0, /* basic mode */ > + .adaption = 1, > + .mru = 1024, /* from android TS 27010 driver */ > + .mtu = 1024, /* from android TS 27010 driver */ > + .t1 = 10, /* ack timer, default 10ms */ > + .t2 = 34, /* response timer, default 34 */ > + .n2 = 3, /* retransmissions, default 3 */ > +}; > + > +static const struct serdev_ngsm_cfg adaption1_cfg = { > + .gsm = &adaption1, > +}; > + > +static const struct serdev_ngsm_cfg motmdm_cfg = { > + .gsm = &adaption1, > + .init_retry_quirk = 1, > + .needs_usb_phy = 1, > + .aggressive_pm = 1, > + .init = motmdm_init, > +}; > + > +static const struct of_device_id serdev_ngsm_id_table[] = { > + { > + .compatible = "etsi,3gpp-ts27010-adaption1", > + .data = &adaption1_cfg, Hmm. Yeah, how should we deal with the mux configuration. There's a bunch of parameters, some of which can be negotiated. Perhaps not something that needs to be solved now, but it should be given some though before partially encoding the configuration in the compatible strings, I'd say. This is also not generally useful until there's a way to actually setup the mux, right (i.e. AT+CMUX)? > + }, > + { > + .compatible = "motorola,mapphone-mdm6600-serial", > + .data = &motmdm_cfg, > + }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, serdev_ngsm_id_table); > + > +static int serdev_ngsm_probe(struct serdev_device *serdev) > +{ > + struct device *dev = &serdev->dev; > + const struct of_device_id *match; > + struct gsm_serdev *gsd; > + struct serdev_ngsm *ddata; > + u64 ttymask; > + int err; > + > + match = of_match_device(of_match_ptr(serdev_ngsm_id_table), dev); > + if (!match) > + return -ENODEV; > + > + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); > + if (!ddata) > + return -ENOMEM; > + > + ddata->dev = dev; > + ddata->cfg = match->data; > + > + gsd = &ddata->gsd; > + gsd->serdev = serdev; > + gsd->output = serdev_ngsm_output; > + serdev_device_set_drvdata(serdev, gsd); > + gsm_serdev_set_drvdata(dev, ddata); > + > + err = serdev_ngsm_phy_init(dev); > + if (err) > + return err; > + > + err = of_property_read_u64(dev->of_node, "ttymask", &ttymask); > + if (err) { > + dev_err(dev, "invalid or missing ttymask: %i\n", err); > + > + return err; > + } > + > + bitmap_from_u64(ddata->ttymask, ttymask); > + > + pm_runtime_set_autosuspend_delay(dev, 200); > + pm_runtime_use_autosuspend(dev); > + pm_runtime_enable(dev); > + err = pm_runtime_get_sync(dev); > + if (err < 0) { > + pm_runtime_put_noidle(dev); > + pm_runtime_disable()? dont_use_autosuspend()? > + return err; > + } > + > + err = gsm_serdev_register_device(gsd); > + if (err) > + goto err_disable; > + > + err = serdev_device_open(gsd->serdev); > + if (err) > + goto err_disable; > + > + /* Optional serial port configuration */ > + of_property_read_u32(dev->of_node->parent, "current-speed", > + &ddata->baudrate); Should this be dev->of_node? The parent would be the serial port itself (i.e. not the client). > + if (ddata->baudrate) > + serdev_device_set_baudrate(gsd->serdev, ddata->baudrate); > + > + if (of_get_property(dev->of_node->parent, "uart-has-rtscts", NULL)) { This looks like a layering issue; why not set these unconditionally and let the upper layers deal with it? > + serdev_device_set_rts(gsd->serdev, true); Do you really need this? The RTS would have been asserted on open by the serial driver. > + serdev_device_set_flow_control(gsd->serdev, true); > + } > + > + err = serdev_ngsm_set_config(dev); > + if (err) > + goto err_close; > + > + err = serdev_ngsm_tty_init(ddata); > + if (err) > + goto err_tty; > + > + if (ddata->cfg->init) { > + err = ddata->cfg->init(serdev); > + if (err) > + goto err_tty; > + } > + > + err = of_platform_populate(dev->of_node, NULL, NULL, dev); > + if (err) > + goto err_tty; This bit wouldn't be needed either if you register the tty devices using tty_port_register_device_serdev() and possibly rethink the device tree binding. > + > + /* Allow parent serdev device to idle when open, balanced in remove */ > + if (ddata->cfg->aggressive_pm) > + pm_runtime_put(&serdev->ctrl->dev); > + > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_autosuspend(dev); > + > + return 0; > + > +err_tty: > + serdev_ngsm_tty_exit(ddata); > + > +err_close: > + serdev_device_close(serdev); > + > +err_disable: > + pm_runtime_dont_use_autosuspend(dev); > + pm_runtime_put_sync(dev); > + pm_runtime_disable(dev); > + gsm_serdev_unregister_device(gsd); > + > + return err; > +} > + > +static void serdev_ngsm_remove(struct serdev_device *serdev) > +{ > + struct gsm_serdev *gsd = serdev_device_get_drvdata(serdev); > + struct device *dev = &serdev->dev; > + struct serdev_ngsm *ddata; > + int err; > + > + ddata = gsm_serdev_get_drvdata(dev); > + > + /* Balance the put done in probe for UART */ > + if (ddata->cfg->aggressive_pm) > + pm_runtime_get(&serdev->ctrl->dev); > + > + err = pm_runtime_get_sync(dev); > + if (err < 0) > + dev_warn(dev, "%s: PM runtime: %i\n", __func__, err); > + > + of_platform_depopulate(dev); > + serdev_ngsm_tty_exit(ddata); > + serdev_device_close(serdev); > + gsm_serdev_unregister_device(gsd); > + > + pm_runtime_dont_use_autosuspend(dev); > + pm_runtime_put_sync(dev); > + pm_runtime_disable(dev); > +} > + > +static struct serdev_device_driver serdev_ngsm_driver = { > + .driver = { > + .name = "serdev_ngsm", "gsmmux"? No need to include "serdev" in the driver name for a driver on the serdev bus. > + .of_match_table = of_match_ptr(serdev_ngsm_id_table), > + .pm = &serdev_ngsm_pm_ops, > + }, > + .probe = serdev_ngsm_probe, > + .remove = serdev_ngsm_remove, > +}; > + > +module_serdev_device_driver(serdev_ngsm_driver); > + > +MODULE_DESCRIPTION("serdev n_gsm driver"); > +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/serdev-gsm.h b/include/linux/serdev-gsm.h > --- a/include/linux/serdev-gsm.h > +++ b/include/linux/serdev-gsm.h > @@ -45,6 +45,17 @@ struct gsm_serdev_dlci { > > #if IS_ENABLED(CONFIG_N_GSM) && IS_ENABLED(CONFIG_SERIAL_DEV_BUS) > > +/* TS 27.010 channel specific functions for consumer drivers */ > +#if IS_ENABLED(CONFIG_SERIAL_DEV_N_GSM) > +extern int > +serdev_ngsm_register_dlci(struct device *dev, struct gsm_serdev_dlci *dlci); > +extern void serdev_ngsm_unregister_dlci(struct device *dev, > + struct gsm_serdev_dlci *dlci); > +extern int serdev_ngsm_write(struct device *dev, struct gsm_serdev_dlci *ops, > + const u8 *buf, int len); > +#endif > + > +/* Interface for_gsm serdev support */ > extern int gsm_serdev_register_device(struct gsm_serdev *gsd); > extern void gsm_serdev_unregister_device(struct gsm_serdev *gsd); > extern int gsm_serdev_register_tty_port(struct gsm_serdev *gsd, int line); Johan
diff --git a/drivers/tty/serdev/Kconfig b/drivers/tty/serdev/Kconfig --- a/drivers/tty/serdev/Kconfig +++ b/drivers/tty/serdev/Kconfig @@ -22,4 +22,14 @@ config SERIAL_DEV_CTRL_TTYPORT depends on SERIAL_DEV_BUS != m default y +config SERIAL_DEV_N_GSM + tristate "Serial device TS 27.010 support" + depends on N_GSM + depends on SERIAL_DEV_CTRL_TTYPORT + help + Select this if you want to use the TS 27.010 with a serial port with + devices such as modems and GNSS devices. + + If unsure, say N. + endif diff --git a/drivers/tty/serdev/Makefile b/drivers/tty/serdev/Makefile --- a/drivers/tty/serdev/Makefile +++ b/drivers/tty/serdev/Makefile @@ -4,3 +4,4 @@ serdev-objs := core.o obj-$(CONFIG_SERIAL_DEV_BUS) += serdev.o obj-$(CONFIG_SERIAL_DEV_CTRL_TTYPORT) += serdev-ttyport.o +obj-$(CONFIG_SERIAL_DEV_N_GSM) += serdev-ngsm.o diff --git a/drivers/tty/serdev/serdev-ngsm.c b/drivers/tty/serdev/serdev-ngsm.c new file mode 100644 --- /dev/null +++ b/drivers/tty/serdev/serdev-ngsm.c @@ -0,0 +1,449 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Generic TS 27.010 serial line discipline serdev driver + * Copyright (C) 2020 Tony Lindgren <tony@atomide.com> + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/serdev.h> +#include <linux/serdev-gsm.h> + +#include <linux/phy/phy.h> + +#include <uapi/linux/gsmmux.h> + +#define TS27010_C_N2 3 /* TS 27.010 default value */ +#define TS27010_RESERVED_DLCI (BIT_ULL(63) | BIT_ULL(62) | BIT_ULL(0)) + +struct serdev_ngsm_cfg { + const struct gsm_config *gsm; + unsigned int init_retry_quirk:1; + unsigned int needs_usb_phy:1; + unsigned int aggressive_pm:1; + int (*init)(struct serdev_device *serdev); /* for device quirks */ +}; + +struct serdev_ngsm { + struct device *dev; + struct gsm_serdev gsd; + struct phy *phy; + u32 baudrate; + DECLARE_BITMAP(ttymask, 64); + const struct serdev_ngsm_cfg *cfg; +}; + +static int serdev_ngsm_tty_init(struct serdev_ngsm *ddata) +{ + struct gsm_serdev *gsd = &ddata->gsd; + struct device *dev = ddata->dev; + int bit, err; + + for_each_set_bit(bit, ddata->ttymask, 64) { + if (BIT_ULL(bit) & TS27010_RESERVED_DLCI) + continue; + + err = gsm_serdev_register_tty_port(gsd, bit); + if (err) { + dev_err(dev, "ngsm tty init failed for dlci%i: %i\n", + bit, err); + return err; + } + } + + return 0; +} + +static void serdev_ngsm_tty_exit(struct serdev_ngsm *ddata) +{ + struct gsm_serdev *gsd = &ddata->gsd; + int bit; + + for_each_set_bit(bit, ddata->ttymask, 64) { + if (BIT_ULL(bit) & TS27010_RESERVED_DLCI) + continue; + + gsm_serdev_unregister_tty_port(gsd, bit); + } +} + +/* + * Note that we rely on gsm_serdev_register_dlci() locking for + * reserved channels that serdev_ngsm_tty_init() and consumer + * drivers may have already reserved. + */ +int serdev_ngsm_register_dlci(struct device *dev, + struct gsm_serdev_dlci *dlci) +{ + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); + struct gsm_serdev *gsd = &ddata->gsd; + int err; + + err = gsm_serdev_register_dlci(gsd, dlci); + if (err) + return err; + + return 0; +} +EXPORT_SYMBOL_GPL(serdev_ngsm_register_dlci); + +void serdev_ngsm_unregister_dlci(struct device *dev, + struct gsm_serdev_dlci *dlci) +{ + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); + struct gsm_serdev *gsd = &ddata->gsd; + + gsm_serdev_unregister_dlci(gsd, dlci); +} +EXPORT_SYMBOL_GPL(serdev_ngsm_unregister_dlci); + +int serdev_ngsm_write(struct device *dev, struct gsm_serdev_dlci *ops, + const u8 *buf, int len) +{ + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); + struct gsm_serdev *gsd = &ddata->gsd; + int ret; + + ret = pm_runtime_get_sync(dev); + if ((ret != -EINPROGRESS) && ret < 0) { + pm_runtime_put_noidle(dev); + + return ret; + } + + ret = gsm_serdev_write(gsd, ops, buf, len); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} +EXPORT_SYMBOL_GPL(serdev_ngsm_write); + +static int serdev_ngsm_set_config(struct device *dev) +{ + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); + struct gsm_serdev *gsd = &ddata->gsd; + struct gsm_config c; + int err, n2; + + memcpy(&c, ddata->cfg->gsm, sizeof(c)); + + if (ddata->cfg->init_retry_quirk) { + n2 = c.n2; + c.n2 *= 10; + err = gsm_serdev_set_config(gsd, &c); + if (err) + return err; + + msleep(5000); + c.n2 = n2; + } + + err = gsm_serdev_set_config(gsd, &c); + if (err) + return err; + + return 0; +} + +static int serdev_ngsm_output(struct gsm_serdev *gsd, u8 *data, int len) +{ + struct serdev_device *serdev = gsd->serdev; + struct device *dev = &serdev->dev; + int err; + + err = pm_runtime_get(dev); + if ((err != -EINPROGRESS) && err < 0) { + pm_runtime_put_noidle(dev); + + return err; + } + + serdev_device_write_buf(serdev, data, len); + + pm_runtime_put(dev); + + return len; +} + +static int serdev_ngsm_runtime_suspend(struct device *dev) +{ + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); + int err; + + if (ddata->cfg->needs_usb_phy) { + err = phy_pm_runtime_put(ddata->phy); + if (err < 0) { + dev_warn(dev, "%s: phy_pm_runtime_put: %i\n", + __func__, err); + + return err; + } + } + + return 0; +} + +static int serdev_ngsm_runtime_resume(struct device *dev) +{ + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); + int err; + + if (ddata->cfg->needs_usb_phy) { + err = phy_pm_runtime_get_sync(ddata->phy); + if (err < 0) { + dev_warn(dev, "%s: phy_pm_runtime_get: %i\n", + __func__, err); + + return err; + } + } + + gsm_serdev_data_kick(&ddata->gsd); + + return 0; +} + +static const struct dev_pm_ops serdev_ngsm_pm_ops = { + SET_RUNTIME_PM_OPS(serdev_ngsm_runtime_suspend, + serdev_ngsm_runtime_resume, + NULL) +}; + +/* + * At least Motorola MDM6600 devices have GPIO wake pins shared between the + * USB PHY and the TS 27.010 interface. So for PM, we need to use the calls + * for phy_pm_runtime. Otherwise the modem won't respond to anything on the + * UART and will never idle either. + */ +static int serdev_ngsm_phy_init(struct device *dev) +{ + struct serdev_ngsm *ddata = gsm_serdev_get_drvdata(dev); + int err; + + if (!ddata->cfg->needs_usb_phy) + return 0; + + ddata->phy = devm_of_phy_get(dev, dev->of_node, NULL); + if (IS_ERR(ddata->phy)) { + err = PTR_ERR(ddata->phy); + if (err != -EPROBE_DEFER) + dev_err(dev, "%s: phy error: %i\n", __func__, err); + + return err; + } + + return 0; +} + +/* + * Configure SoC 8250 device for 700 ms autosuspend delay, Values around 600 ms + * and shorter cause spurious wake-up events at least on Droid 4. Also keep the + * SoC 8250 device active during use because of the OOB GPIO wake-up signaling + * shared with USB PHY. + */ +static int motmdm_init(struct serdev_device *serdev) +{ + pm_runtime_set_autosuspend_delay(serdev->ctrl->dev.parent, 700); + pm_suspend_ignore_children(&serdev->ctrl->dev, false); + + return 0; +} + +static const struct gsm_config adaption1 = { + .i = 1, /* 1 = UIH, 2 = UI */ + .initiator = 1, + .encapsulation = 0, /* basic mode */ + .adaption = 1, + .mru = 1024, /* from android TS 27010 driver */ + .mtu = 1024, /* from android TS 27010 driver */ + .t1 = 10, /* ack timer, default 10ms */ + .t2 = 34, /* response timer, default 34 */ + .n2 = 3, /* retransmissions, default 3 */ +}; + +static const struct serdev_ngsm_cfg adaption1_cfg = { + .gsm = &adaption1, +}; + +static const struct serdev_ngsm_cfg motmdm_cfg = { + .gsm = &adaption1, + .init_retry_quirk = 1, + .needs_usb_phy = 1, + .aggressive_pm = 1, + .init = motmdm_init, +}; + +static const struct of_device_id serdev_ngsm_id_table[] = { + { + .compatible = "etsi,3gpp-ts27010-adaption1", + .data = &adaption1_cfg, + }, + { + .compatible = "motorola,mapphone-mdm6600-serial", + .data = &motmdm_cfg, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, serdev_ngsm_id_table); + +static int serdev_ngsm_probe(struct serdev_device *serdev) +{ + struct device *dev = &serdev->dev; + const struct of_device_id *match; + struct gsm_serdev *gsd; + struct serdev_ngsm *ddata; + u64 ttymask; + int err; + + match = of_match_device(of_match_ptr(serdev_ngsm_id_table), dev); + if (!match) + return -ENODEV; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + ddata->dev = dev; + ddata->cfg = match->data; + + gsd = &ddata->gsd; + gsd->serdev = serdev; + gsd->output = serdev_ngsm_output; + serdev_device_set_drvdata(serdev, gsd); + gsm_serdev_set_drvdata(dev, ddata); + + err = serdev_ngsm_phy_init(dev); + if (err) + return err; + + err = of_property_read_u64(dev->of_node, "ttymask", &ttymask); + if (err) { + dev_err(dev, "invalid or missing ttymask: %i\n", err); + + return err; + } + + bitmap_from_u64(ddata->ttymask, ttymask); + + pm_runtime_set_autosuspend_delay(dev, 200); + pm_runtime_use_autosuspend(dev); + pm_runtime_enable(dev); + err = pm_runtime_get_sync(dev); + if (err < 0) { + pm_runtime_put_noidle(dev); + + return err; + } + + err = gsm_serdev_register_device(gsd); + if (err) + goto err_disable; + + err = serdev_device_open(gsd->serdev); + if (err) + goto err_disable; + + /* Optional serial port configuration */ + of_property_read_u32(dev->of_node->parent, "current-speed", + &ddata->baudrate); + if (ddata->baudrate) + serdev_device_set_baudrate(gsd->serdev, ddata->baudrate); + + if (of_get_property(dev->of_node->parent, "uart-has-rtscts", NULL)) { + serdev_device_set_rts(gsd->serdev, true); + serdev_device_set_flow_control(gsd->serdev, true); + } + + err = serdev_ngsm_set_config(dev); + if (err) + goto err_close; + + err = serdev_ngsm_tty_init(ddata); + if (err) + goto err_tty; + + if (ddata->cfg->init) { + err = ddata->cfg->init(serdev); + if (err) + goto err_tty; + } + + err = of_platform_populate(dev->of_node, NULL, NULL, dev); + if (err) + goto err_tty; + + /* Allow parent serdev device to idle when open, balanced in remove */ + if (ddata->cfg->aggressive_pm) + pm_runtime_put(&serdev->ctrl->dev); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; + +err_tty: + serdev_ngsm_tty_exit(ddata); + +err_close: + serdev_device_close(serdev); + +err_disable: + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + gsm_serdev_unregister_device(gsd); + + return err; +} + +static void serdev_ngsm_remove(struct serdev_device *serdev) +{ + struct gsm_serdev *gsd = serdev_device_get_drvdata(serdev); + struct device *dev = &serdev->dev; + struct serdev_ngsm *ddata; + int err; + + ddata = gsm_serdev_get_drvdata(dev); + + /* Balance the put done in probe for UART */ + if (ddata->cfg->aggressive_pm) + pm_runtime_get(&serdev->ctrl->dev); + + err = pm_runtime_get_sync(dev); + if (err < 0) + dev_warn(dev, "%s: PM runtime: %i\n", __func__, err); + + of_platform_depopulate(dev); + serdev_ngsm_tty_exit(ddata); + serdev_device_close(serdev); + gsm_serdev_unregister_device(gsd); + + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); +} + +static struct serdev_device_driver serdev_ngsm_driver = { + .driver = { + .name = "serdev_ngsm", + .of_match_table = of_match_ptr(serdev_ngsm_id_table), + .pm = &serdev_ngsm_pm_ops, + }, + .probe = serdev_ngsm_probe, + .remove = serdev_ngsm_remove, +}; + +module_serdev_device_driver(serdev_ngsm_driver); + +MODULE_DESCRIPTION("serdev n_gsm driver"); +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/serdev-gsm.h b/include/linux/serdev-gsm.h --- a/include/linux/serdev-gsm.h +++ b/include/linux/serdev-gsm.h @@ -45,6 +45,17 @@ struct gsm_serdev_dlci { #if IS_ENABLED(CONFIG_N_GSM) && IS_ENABLED(CONFIG_SERIAL_DEV_BUS) +/* TS 27.010 channel specific functions for consumer drivers */ +#if IS_ENABLED(CONFIG_SERIAL_DEV_N_GSM) +extern int +serdev_ngsm_register_dlci(struct device *dev, struct gsm_serdev_dlci *dlci); +extern void serdev_ngsm_unregister_dlci(struct device *dev, + struct gsm_serdev_dlci *dlci); +extern int serdev_ngsm_write(struct device *dev, struct gsm_serdev_dlci *ops, + const u8 *buf, int len); +#endif + +/* Interface for_gsm serdev support */ extern int gsm_serdev_register_device(struct gsm_serdev *gsd); extern void gsm_serdev_unregister_device(struct gsm_serdev *gsd); extern int gsm_serdev_register_tty_port(struct gsm_serdev *gsd, int line);