| Message ID | 20200512214713.40501-7-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | n_gsm serdev support and GNSS driver for droid4 | expand |
On Tue 2020-05-12 14:47:13, Tony Lindgren wrote: > Let's enable the TS 27.010 /dev/gsmmux* interfaces via Linux n_gsm that > can be used for voice calls and SMS with commands using a custom Motorola > format. > > And let's also enable the kernel GNSS driver via serdev-ngsm that uses a > dedicated TS 27.010 channel. > > Note that voice call audio mixer is not supported yet. > > Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Best regards, Pavel
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -698,6 +698,20 @@ &uart1 { pinctrl-0 = <&uart1_pins>; interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0xfc>; + + modem { + compatible = "motorola,mapphone-mdm6600-serial"; + ttymask = <0 0x00001fee>; + phys = <&fsusb1_phy>; + phy-names = "usb"; + #address-cells = <1>; + #size-cells = <0>; + + gnss@4 { + compatible = "motorola,mapphone-mdm6600-gnss"; + reg = <4>; + }; + }; }; &uart3 {
Let's enable the TS 27.010 /dev/gsmmux* interfaces via Linux n_gsm that can be used for voice calls and SMS with commands using a custom Motorola format. And let's also enable the kernel GNSS driver via serdev-ngsm that uses a dedicated TS 27.010 channel. Note that voice call audio mixer is not supported yet. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/motorola-mapphone-common.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)