From patchwork Thu May 21 19:50:28 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Drew Fustini X-Patchwork-Id: 11563925 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 22F9114C0 for ; Thu, 21 May 2020 19:50:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 063C520823 for ; Thu, 21 May 2020 19:50:34 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=beagleboard-org.20150623.gappssmtp.com header.i=@beagleboard-org.20150623.gappssmtp.com header.b="pdzOstKG" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729884AbgEUTud (ORCPT ); Thu, 21 May 2020 15:50:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48860 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728273AbgEUTud (ORCPT ); Thu, 21 May 2020 15:50:33 -0400 Received: from mail-wr1-x442.google.com (mail-wr1-x442.google.com [IPv6:2a00:1450:4864:20::442]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DC87DC061A0F for ; Thu, 21 May 2020 12:50:32 -0700 (PDT) Received: by mail-wr1-x442.google.com with SMTP id g12so6657637wrw.1 for ; Thu, 21 May 2020 12:50:32 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=beagleboard-org.20150623.gappssmtp.com; s=20150623; h=date:from:to:subject:message-id:mime-version:content-disposition; bh=W0bmmrcfoMMLY53+q+PM9oHmwAiHFiyVtLVqP+FNgI0=; b=pdzOstKGZ1qMN+Pt/TsxJHH8iZB55xatp5okzckH9uMnliXxBzJ9d0Dl9uBJ2qEw9R 7PTdcGlnFcOu+873UWzw/00aGEtsuyvlAJ7ZFQpy5TP4vD2NyfcKQKtrD9Ck7iQd2NkI 6Ng7TcezZa+S8AV4dIUNdC13V8LwS/Vfi4jGHA+K14GOcFaDrGoZDhHZYKyW2U5fLupK ObdGJ7gdJpQwB7rewEDpX+h3vVGjeepFL58TpAGyAJOf5F8CjhUnRqtwFmi3aEy4lD/M LoC1VKlwtJvVcmWpthwx0VwlfA/PwebI1aTE6ljjX7R7Mk+e6inPHbpSTFiu8/My8QCT voxg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:subject:message-id:mime-version :content-disposition; bh=W0bmmrcfoMMLY53+q+PM9oHmwAiHFiyVtLVqP+FNgI0=; b=deDpIrJ9qRBOc0azxUhfWg9jM+E0r2/HPYIS1+1ncgLlR2ThyPj9pfPP5OLdjayyn7 bYBKxv9D6pHIf2NAQIc6I04I7W7EYAX+21UKxPbX9m2FEJ3dSakgp+ySRGw1DgQBXYcS yoavpWLhgpVS+M5eNYhCj3Ra4rqL/T7zWhGTmrwfglrXR+9EzRQDhXYalbsaxZR+u6m6 DbbSVQI4G40njDwn/4j3mmNUyiRLf0JM8Rb4YorADf2I6Fkim+QpgfzOaYjTifojSjR5 /6VfiQvDD+LQnEnr4LDYK0ONy09MopnBwGgIvJbPejg+/rUaaf9936Bf7IS5NFVtV0Tl IpFA== X-Gm-Message-State: AOAM531Sl/HNssHNPzwzzDBu1ZtBXISfJqrypcd/LtOtoFew5OUavkPh 31luIsPHxI5d0eZzsDmPyu2jFA== X-Google-Smtp-Source: ABdhPJxI5+4zP6A4maoDpeagfmZeWogan+Aicw3eNBXaIjNm2V8HkzqxiSDUki2DMSG365TA15J5jQ== X-Received: by 2002:a5d:6806:: with SMTP id w6mr207199wru.324.1590090631449; Thu, 21 May 2020 12:50:31 -0700 (PDT) Received: from x1 (i59F66838.versanet.de. [89.246.104.56]) by smtp.gmail.com with ESMTPSA id 18sm7329042wmj.19.2020.05.21.12.50.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 21 May 2020 12:50:30 -0700 (PDT) Date: Thu, 21 May 2020 21:50:28 +0200 From: Drew Fustini To: Linus Walleij , Grygorii Strashko , =?iso-8859-1?q?Beno=EEt?= Cousson , Tony Lindgren , Rob Herring , Linux-OMAP , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Jason Kridner , Robert Nelson Subject: [PATCH] arm: dts: am335x-boneblack: add gpio-line-names Message-ID: <20200521195028.GB429020@x1> MIME-Version: 1.0 Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Add gpio-line-names properties to the GPIO controller nodes. The BeagleBone Black has P8 and P9 headers [0] which expose many of the AM3358 ZCZ SoC balls to stacking expansion boards called "capes", or to other external connections like jumper wires connected to a breadboard. BeagleBone users will often refer to the "Cape Exanpsion Headers" pin diagram [1] as it is in the "Bone101" getting started tutorial. [2] Most of the P8 and P9 header pins can muxed to a GPIO line. The gpio-line-names describe which P8 or P9 pin that line goes to and the default mux for that P8 or P9 pin if it is not GPIO. For example, gpiochip 1 line 0 is connected to P8 header pin 25 (P8_25) however the default device tree has the corresponding BGA ball (ZCZ U7) muxed to mmc1_dat0 as it is used for the on-board eMMC chip. For that GPIO line to be used, one would need to modify the device tree to disable the eMMC and change the pin mux for that ball to GPIO mode. Some of the AM3358 ZCZ balls corresponding to GPIO lines are not routed to a P8 or P9 header, but are instead wired to some peripheral device like on-board eMMC, HDMI framer IC, or status LEDs. Those names are in brackets to denote those GPIO lines can not be used. Some GPIO lines are named "[NC]" as the corresponding balls are not routed to anything on the PCB. The goal for these names is to make it easier for a user viewing the output of gpioinfo to determine which P8 or P9 pin is connected to a GPIO line. The output of gpioinfo on a BeagleBone Black would be: [0] https://git.io/JfgOd [1] https://beagleboard.org/capes [1] https://beagleboard.org/Support/bone101 [2] https://beagleboard.org/static/images/cape-headers.png Reviewed-by: Jason Kridner Reviewed-by: Robert Nelson Signed-off-by: Drew Fustini --- V1 note: I had posted a patch with these line names for am335x-bone-common.dtsi but Grygorii Strashko pointed out that the names are not applicable to all BeagleBone models. Thus is have created this patch to add these names just for the BeagleBone Black. arch/arm/boot/dts/am335x-boneblack.dts | 144 +++++++++++++++++++++++++ 1 file changed, 144 insertions(+) diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index d3928662aed4..5f31e832eb82 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -23,3 +23,147 @@ oppnitro-1000000000 { opp-supported-hw = <0x06 0x0100>; }; }; + +&gpio0 { + gpio-line-names = + "[ethernet]", + "[ethernet]", + "P9_22 [spi0_sclk]", + "P9_21 [spi0_d0]", + "P9_18 [spi0_d1]", + "P9_17 [spi0_cs0]", + "[sd card]", + "P9_42A [ecappwm0]", + "P8_35 [hdmi]", + "P8_33 [hdmi]", + "P8_31 [hdmi]", + "P8_32 [hdmi]", + "P9_20 [i2c2_sda]", + "P9_19 [i2c2_scl]", + "P9_26 [uart1_rxd]", + "P9_24 [uart1_txd]", + "[ethernet]", + "[ethernet]", + "[usb]", + "[hdmi]", + "P9_41B", + "[ethernet]", + "P8_19 [ehrpwm2a]", + "P8_13 [ehrpwm2b]", + "[NC]", + "[NC]", + "P8_14", + "P8_17", + "[ethernet]", + "[ethernet]", + "P9_11 [uart4_rxd]", + "P9_13 [uart4_txd]"; +}; + +&gpio1 { + gpio-line-names = + "P8_25 [emmc]", + "[emmc]", + "P8_5 [emmc]", + "P8_6 [emmc]", + "P8_23 [emmc]", + "P8_22 [emmc]", + "P8_3 [emmc]", + "P8_4 [emmc]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "P8_12", + "P8_11", + "P8_16", + "P8_15", + "P9_15A", + "P9_23", + "P9_14 [ehrpwm1a]", + "P9_16 [ehrpwm1b]", + "[emmc]", + "[usr0 led]", + "[usr1 led]", + "[usr2 led]", + "[usr3 led]", + "[hdmi]", + "[usb]", + "[hdmi audio]", + "P9_12", + "P8_26", + "P8_21 [emmc]", + "P8_20 [emmc]"; +}; + +&gpio2 { + gpio-line-names = + "P9_15B", + "P8_18", + "P8_7", + "P8_8", + "P8_10", + "P8_9", + "P8_45 [hdmi]", + "P8_46 [hdmi]", + "P8_43 [hdmi]", + "P8_44 [hdmi]", + "P8_41 [hdmi]", + "P8_42 [hdmi]", + "P8_39 [hdmi]", + "P8_40 [hdmi]", + "P8_37 [hdmi]", + "P8_38 [hdmi]", + "P8_36 [hdmi]", + "P8_34 [hdmi]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "P8_27 [hdmi]", + "P8_29 [hdmi]", + "P8_28 [hdmi]", + "P8_30 [hdmi]", + "[emmc]", + "[emmc]", + "[emmc]", + "[emmc]", + "[emmc]", + "[emmc]"; +}; + +&gpio3 { + gpio-line-names = + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[i2c0]", + "[i2c0]", + "[emu]", + "[emu]", + "[ethernet]", + "[ethernet]", + "[NC]", + "[NC]", + "[usb]", + "P9_31 [spi1_sclk]", + "P9_29 [spi1_d0]", + "P9_30 [spi1_d1]", + "P9_28 [spi1_cs0]", + "P9_42B [ecappwm0]", + "P9_27", + "P9_41A", + "P9_25", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]"; +};