| Message ID | 20200808100250.35076-1-dave@ds0.me (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | omap5: Fix reboot DPLL lock failure when using ABE TIMERs | expand |
Hi, * David Shah <dave@ds0.me> [200808 10:03]: > Having the ABE DPLL ref and bypass muxes set to different inputs was > causing the DPLL not to lock when TIMER8 was used, as it is in the Pyra > for the backlight. > > This patch fixes this by setting abe_dpll_bypass_clk_mux to sys_32k_ck > in omap5xxx_dt_clk_init. > > A similar patch may also be needed for OMAP44xx which has similar code > in omap4xxx_dt_clk_init, but I have not added this as I have no hardware > to test on. > > Signed-off-by: David Shah <dave@ds0.me> Adding Tero to Cc. Regards, Tony > --- > drivers/clk/ti/clk-54xx.c | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c > index a4c5be533fbf..0a998e0e7d3b 100644 > --- a/drivers/clk/ti/clk-54xx.c > +++ b/drivers/clk/ti/clk-54xx.c > @@ -617,7 +617,7 @@ static struct ti_dt_clk omap54xx_clks[] = { > int __init omap5xxx_dt_clk_init(void) > { > int rc; > - struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll; > + struct clk *abe_dpll_ref, *abe_dpll, *abe_dpll_byp, *sys_32k_ck, *usb_dpll; > > ti_dt_clocks_register(omap54xx_clks); > > @@ -628,6 +628,16 @@ int __init omap5xxx_dt_clk_init(void) > abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_clk_mux"); > sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck"); > rc = clk_set_parent(abe_dpll_ref, sys_32k_ck); > + > + /* > + * This must also be set to sys_32k_ck to match or > + * the ABE DPLL will not lock on a warm reboot when > + * ABE timers are used. > + */ > + abe_dpll_byp = clk_get_sys(NULL, "abe_dpll_bypass_clk_mux"); > + if (!rc) > + rc = clk_set_parent(abe_dpll_byp, sys_32k_ck); > + > abe_dpll = clk_get_sys(NULL, "dpll_abe_ck"); > if (!rc) > rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ); > -- > 2.27.0 >
* Tony Lindgren <tony@atomide.com> [200817 06:42]: > Hi, > > * David Shah <dave@ds0.me> [200808 10:03]: > > Having the ABE DPLL ref and bypass muxes set to different inputs was > > causing the DPLL not to lock when TIMER8 was used, as it is in the Pyra > > for the backlight. > > > > This patch fixes this by setting abe_dpll_bypass_clk_mux to sys_32k_ck > > in omap5xxx_dt_clk_init. > > > > A similar patch may also be needed for OMAP44xx which has similar code > > in omap4xxx_dt_clk_init, but I have not added this as I have no hardware > > to test on. > > > > Signed-off-by: David Shah <dave@ds0.me> > > Adding Tero to Cc. David, care to resend this to the clock maintainers for applying? To me it looks like the maintainers have not seen this one, try with: $ scripts/get_maintainer.pl -f drivers/clk/ti/clk-54xx.c Tero Kristo <t-kristo@ti.com> (maintainer:TI CLOCK DRIVER) Michael Turquette <mturquette@baylibre.com> (maintainer:COMMON CLK FRAMEWORK) Stephen Boyd <sboyd@kernel.org> (maintainer:COMMON CLK FRAMEWORK) linux-omap@vger.kernel.org (open list:TI CLOCK DRIVER) linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK) linux-kernel@vger.kernel.org (open list) Regards, Tony > > --- > > drivers/clk/ti/clk-54xx.c | 12 +++++++++++- > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c > > index a4c5be533fbf..0a998e0e7d3b 100644 > > --- a/drivers/clk/ti/clk-54xx.c > > +++ b/drivers/clk/ti/clk-54xx.c > > @@ -617,7 +617,7 @@ static struct ti_dt_clk omap54xx_clks[] = { > > int __init omap5xxx_dt_clk_init(void) > > { > > int rc; > > - struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll; > > + struct clk *abe_dpll_ref, *abe_dpll, *abe_dpll_byp, *sys_32k_ck, *usb_dpll; > > > > ti_dt_clocks_register(omap54xx_clks); > > > > @@ -628,6 +628,16 @@ int __init omap5xxx_dt_clk_init(void) > > abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_clk_mux"); > > sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck"); > > rc = clk_set_parent(abe_dpll_ref, sys_32k_ck); > > + > > + /* > > + * This must also be set to sys_32k_ck to match or > > + * the ABE DPLL will not lock on a warm reboot when > > + * ABE timers are used. > > + */ > > + abe_dpll_byp = clk_get_sys(NULL, "abe_dpll_bypass_clk_mux"); > > + if (!rc) > > + rc = clk_set_parent(abe_dpll_byp, sys_32k_ck); > > + > > abe_dpll = clk_get_sys(NULL, "dpll_abe_ck"); > > if (!rc) > > rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ); > > -- > > 2.27.0 > >
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index a4c5be533fbf..0a998e0e7d3b 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -617,7 +617,7 @@ static struct ti_dt_clk omap54xx_clks[] = { int __init omap5xxx_dt_clk_init(void) { int rc; - struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll; + struct clk *abe_dpll_ref, *abe_dpll, *abe_dpll_byp, *sys_32k_ck, *usb_dpll; ti_dt_clocks_register(omap54xx_clks); @@ -628,6 +628,16 @@ int __init omap5xxx_dt_clk_init(void) abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_clk_mux"); sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck"); rc = clk_set_parent(abe_dpll_ref, sys_32k_ck); + + /* + * This must also be set to sys_32k_ck to match or + * the ABE DPLL will not lock on a warm reboot when + * ABE timers are used. + */ + abe_dpll_byp = clk_get_sys(NULL, "abe_dpll_bypass_clk_mux"); + if (!rc) + rc = clk_set_parent(abe_dpll_byp, sys_32k_ck); + abe_dpll = clk_get_sys(NULL, "dpll_abe_ck"); if (!rc) rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ);
Having the ABE DPLL ref and bypass muxes set to different inputs was causing the DPLL not to lock when TIMER8 was used, as it is in the Pyra for the backlight. This patch fixes this by setting abe_dpll_bypass_clk_mux to sys_32k_ck in omap5xxx_dt_clk_init. A similar patch may also be needed for OMAP44xx which has similar code in omap4xxx_dt_clk_init, but I have not added this as I have no hardware to test on. Signed-off-by: David Shah <dave@ds0.me> --- drivers/clk/ti/clk-54xx.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)