| Message ID | 20200919200836.3218536-1-drew@beagleboard.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] ARM: dts: document pinctrl-single,pins when #pinctrl-cells = 2 | expand |
* Drew Fustini <drew@beagleboard.org> [200919 23:10]: > Document the values in pinctrl-single,pins when #pinctrl-cells = <2> > > Fixes: 27c90e5e48d0 ("ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2") > Reported-by: Trent Piepho <tpiepho@gmail.com> > Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/ > Signed-off-by: Drew Fustini <drew@beagleboard.org> > --- > v2 change: > - rephrase to make it clear that the pin conf value and pin mux value > are OR'd together with #pinctrl-cells = <2> Acked-by: Tony Lindgren <tony@atomide.com> > .../bindings/pinctrl/pinctrl-single.txt | 21 ++++++++++++------- > 1 file changed, 14 insertions(+), 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt > index e705acd3612c..f903eb4471f8 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt > @@ -94,16 +94,23 @@ pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as > specified in the pinctrl-bindings.txt document in this directory. > > The pin configuration nodes for pinctrl-single are specified as pinctrl > -register offset and value pairs using pinctrl-single,pins. Only the bits > -specified in pinctrl-single,function-mask are updated. For example, setting > -a pin for a device could be done with: > +register offset and values using pinctrl-single,pins. Only the bits specified > +in pinctrl-single,function-mask are updated. > + > +When #pinctrl-cells = 1, then setting a pin for a device could be done with: > > pinctrl-single,pins = <0xdc 0x118>; > > -Where 0xdc is the offset from the pinctrl register base address for the > -device pinctrl register, and 0x118 contains the desired value of the > -pinctrl register. See the device example and static board pins example > -below for more information. > +Where 0xdc is the offset from the pinctrl register base address for the device > +pinctrl register, and 0x118 contains the desired value of the pinctrl register. > + > +When #pinctrl-cells = 2, then setting a pin for a device could be done with: > + > + pinctrl-single,pins = <0xdc 0x30 0x07>; > + > +Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. > +These two values are OR'd together to produce the value stored at offset 0xdc. > +See the device example and static board pins example below for more information. > > In case when one register changes more than one pin's mux the > pinctrl-single,bits need to be used which takes three parameters: > -- > 2.25.1 >
On Sat, 19 Sep 2020 22:08:37 +0200, Drew Fustini wrote: > Document the values in pinctrl-single,pins when #pinctrl-cells = <2> > > Fixes: 27c90e5e48d0 ("ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2") > Reported-by: Trent Piepho <tpiepho@gmail.com> > Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/ > Signed-off-by: Drew Fustini <drew@beagleboard.org> > --- > v2 change: > - rephrase to make it clear that the pin conf value and pin mux value > are OR'd together with #pinctrl-cells = <2> > > > .../bindings/pinctrl/pinctrl-single.txt | 21 ++++++++++++------- > 1 file changed, 14 insertions(+), 7 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On Sat, Sep 19, 2020 at 10:10 PM Drew Fustini <drew@beagleboard.org> wrote: > Document the values in pinctrl-single,pins when #pinctrl-cells = <2> > > Fixes: 27c90e5e48d0 ("ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2") > Reported-by: Trent Piepho <tpiepho@gmail.com> > Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/ > Signed-off-by: Drew Fustini <drew@beagleboard.org> > --- > v2 change: > - rephrase to make it clear that the pin conf value and pin mux value > are OR'd together with #pinctrl-cells = <2> Patch applied with the ACKs. Thanks for fixing this! Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index e705acd3612c..f903eb4471f8 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -94,16 +94,23 @@ pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt document in this directory. The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and value pairs using pinctrl-single,pins. Only the bits -specified in pinctrl-single,function-mask are updated. For example, setting -a pin for a device could be done with: +register offset and values using pinctrl-single,pins. Only the bits specified +in pinctrl-single,function-mask are updated. + +When #pinctrl-cells = 1, then setting a pin for a device could be done with: pinctrl-single,pins = <0xdc 0x118>; -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, and 0x118 contains the desired value of the -pinctrl register. See the device example and static board pins example -below for more information. +Where 0xdc is the offset from the pinctrl register base address for the device +pinctrl register, and 0x118 contains the desired value of the pinctrl register. + +When #pinctrl-cells = 2, then setting a pin for a device could be done with: + + pinctrl-single,pins = <0xdc 0x30 0x07>; + +Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. +These two values are OR'd together to produce the value stored at offset 0xdc. +See the device example and static board pins example below for more information. In case when one register changes more than one pin's mux the pinctrl-single,bits need to be used which takes three parameters:
Document the values in pinctrl-single,pins when #pinctrl-cells = <2> Fixes: 27c90e5e48d0 ("ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2") Reported-by: Trent Piepho <tpiepho@gmail.com> Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/ Signed-off-by: Drew Fustini <drew@beagleboard.org> --- v2 change: - rephrase to make it clear that the pin conf value and pin mux value are OR'd together with #pinctrl-cells = <2> .../bindings/pinctrl/pinctrl-single.txt | 21 ++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)