diff mbox series

[v3,33/56] drm/omap: dsi: convert to drm_panel

Message ID 20201105120333.947408-34-tomi.valkeinen@ti.com (mailing list archive)
State New, archived
Headers show
Series Convert DSI code to use drm_mipi_dsi and drm_panel | expand

Commit Message

Tomi Valkeinen Nov. 5, 2020, 12:03 p.m. UTC
From: Sebastian Reichel <sebastian.reichel@collabora.com>

This converts the DSI module to expect common drm_panel display
drivers instead of dssdev based ones.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../gpu/drm/omapdrm/displays/panel-dsi-cm.c   | 204 +++++++-----------
 drivers/gpu/drm/omapdrm/dss/dsi.c             | 133 ++++++++++--
 .../gpu/drm/omapdrm/dss/omapdss-boot-init.c   |   1 -
 drivers/gpu/drm/omapdrm/dss/omapdss.h         |   8 -
 4 files changed, 189 insertions(+), 157 deletions(-)

Comments

Laurent Pinchart Nov. 9, 2020, 10:39 a.m. UTC | #1
On Thu, Nov 05, 2020 at 02:03:10PM +0200, Tomi Valkeinen wrote:
> From: Sebastian Reichel <sebastian.reichel@collabora.com>
> 
> This converts the DSI module to expect common drm_panel display
> drivers instead of dssdev based ones.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
>  .../gpu/drm/omapdrm/displays/panel-dsi-cm.c   | 204 +++++++-----------
>  drivers/gpu/drm/omapdrm/dss/dsi.c             | 133 ++++++++++--
>  .../gpu/drm/omapdrm/dss/omapdss-boot-init.c   |   1 -
>  drivers/gpu/drm/omapdrm/dss/omapdss.h         |   8 -
>  4 files changed, 189 insertions(+), 157 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> index d9b3444b4faf..3668b3f0aff2 100644
> --- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> +++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> @@ -6,8 +6,6 @@
>   * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
>   */
>  
> -/* #define DEBUG */
> -
>  #include <linux/backlight.h>
>  #include <linux/delay.h>
>  #include <linux/gpio/consumer.h>
> @@ -20,11 +18,14 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include <drm/drm_connector.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_modes.h>

Alphabetically ordered please.

>  
> +#include <video/display_timing.h>
>  #include <video/mipi_display.h>
>  #include <video/of_display_timing.h>
> -
> -#include "../dss/omapdss.h"
> +#include <video/videomode.h>
>  
>  #define DCS_READ_NUM_ERRORS	0x05
>  #define DCS_GET_ID1		0xda
> @@ -35,11 +36,8 @@
>  
>  struct panel_drv_data {
>  	struct mipi_dsi_device *dsi;
> -
> -	struct omap_dss_device dssdev;
> -	struct omap_dss_device *src;
> -
> -	struct videomode vm;
> +	struct drm_panel panel;
> +	struct drm_display_mode mode;
>  
>  	struct mutex lock;
>  
> @@ -71,7 +69,11 @@ struct panel_drv_data {
>  	bool ulps_enabled;
>  };
>  
> -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
> +

A single blank line is enough.

> +static inline struct panel_drv_data *panel_to_ddata(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct panel_drv_data, panel);
> +}
>  
>  static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
>  
> @@ -285,7 +287,6 @@ static void dsicm_hw_reset(struct panel_drv_data *ddata)
>  
>  static int dsicm_power_on(struct panel_drv_data *ddata)
>  {
> -	struct omap_dss_device *src = ddata->src;
>  	u8 id1, id2, id3;
>  	int r;
>  
> @@ -322,10 +323,6 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
>  	if (r)
>  		goto err;
>  
> -	r = src->ops->dsi.enable_video_output(src, ddata->dsi->channel);
> -	if (r)
> -		goto err;
> -
>  	ddata->enabled = true;
>  
>  	if (!ddata->intro_printed) {
> @@ -345,15 +342,12 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
>  	return r;
>  }
>  
> -static void dsicm_power_off(struct panel_drv_data *ddata)
> +static int dsicm_power_off(struct panel_drv_data *ddata)
>  {
> -	struct omap_dss_device *src = ddata->src;
>  	int r;
>  
>  	ddata->enabled = false;
>  
> -	src->ops->dsi.disable_video_output(src, ddata->dsi->channel);
> -
>  	r = mipi_dsi_dcs_set_display_off(ddata->dsi);
>  	if (!r)
>  		r = dsicm_sleep_in(ddata);
> @@ -363,51 +357,25 @@ static void dsicm_power_off(struct panel_drv_data *ddata)
>  				"error disabling panel, issuing HW reset\n");
>  		dsicm_hw_reset(ddata);
>  	}
> -}
> -
> -static int dsicm_connect(struct omap_dss_device *src,
> -			 struct omap_dss_device *dst)
> -{
> -	struct panel_drv_data *ddata = to_panel_data(dst);
> -
> -	ddata->src = src;
> -	return 0;
> -}
> -
> -static void dsicm_disconnect(struct omap_dss_device *src,
> -			     struct omap_dss_device *dst)
> -{
> -	struct panel_drv_data *ddata = to_panel_data(dst);
>  
> -	ddata->src = NULL;
> +	return r;
>  }
>  
> -static void dsicm_pre_enable(struct omap_dss_device *dssdev)
> +static int dsicm_prepare(struct drm_panel *panel)
>  {
> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
> -	struct omap_dss_device *src = ddata->src;
> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
>  	int r;
> -	struct omap_dss_dsi_config dsi_config = {
> -		.vm = &ddata->vm,
> -		.hs_clk_min = 150000000,
> -		.hs_clk_max = 300000000,
> -		.lp_clk_min = 7000000,
> -		.lp_clk_max = 10000000,
> -	};
>  
>  	r = regulator_bulk_enable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
>  	if (r)
>  		dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r);
>  
> -	r = src->ops->dsi.set_config(src, &dsi_config);
> -	if (r) {
> -		dev_err(&ddata->dsi->dev, "failed to configure DSI\n");
> -	}
> +	return r;
>  }
>  
> -static void dsicm_enable(struct omap_dss_device *dssdev)
> +static int dsicm_enable(struct drm_panel *panel)
>  {
> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
>  	int r;
>  
>  	mutex_lock(&ddata->lock);
> @@ -420,33 +388,39 @@ static void dsicm_enable(struct omap_dss_device *dssdev)
>  
>  	dsicm_bl_power(ddata, true);
>  
> -	return;
> +	return 0;
>  err:
> -	dev_dbg(&ddata->dsi->dev, "enable failed (%d)\n", r);
> +	dev_err(&ddata->dsi->dev, "enable failed (%d)\n", r);
>  	mutex_unlock(&ddata->lock);
> +	return r;
> +}
> +
> +static int dsicm_unprepare(struct drm_panel *panel)
> +{
> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
> +	int r;
> +
> +	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
> +	if (r)
> +		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
> +
> +	return r;
>  }
>  
> -static void dsicm_disable(struct omap_dss_device *dssdev)
> +static int dsicm_disable(struct drm_panel *panel)
>  {
> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
> +	int r;
>  
>  	dsicm_bl_power(ddata, false);
>  
>  	mutex_lock(&ddata->lock);
>  
> -	dsicm_power_off(ddata);
> +	r = dsicm_power_off(ddata);
>  
>  	mutex_unlock(&ddata->lock);
> -}
> -
> -static void dsicm_post_disable(struct omap_dss_device *dssdev)
> -{
> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
> -	int r;
>  
> -	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
> -	if (r)
> -		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
> +	return r;
>  }
>  
>  static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
> @@ -465,50 +439,37 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
>  	return r;
>  }
>  
> -static int dsicm_get_modes(struct omap_dss_device *dssdev,
> +static int dsicm_get_modes(struct drm_panel *panel,
>  			   struct drm_connector *connector)
>  {
> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_duplicate(connector->dev, &ddata->mode);
> +	if (!mode) {
> +		dev_err(&ddata->dsi->dev, "failed to add mode %ux%ux@%u kHz\n",
> +			ddata->mode.hdisplay, ddata->mode.vdisplay,
> +			ddata->mode.clock);
> +		return -ENOMEM;
> +	}
> +
> +	drm_mode_set_name(mode);
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>  
>  	connector->display_info.width_mm = ddata->width_mm;
>  	connector->display_info.height_mm = ddata->height_mm;
>  
> -	return omapdss_display_get_modes(connector, &ddata->vm);
> -}
> -
> -static int dsicm_check_timings(struct omap_dss_device *dssdev,
> -			       struct drm_display_mode *mode)
> -{
> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
> -	int ret = 0;
> -
> -	if (mode->hdisplay != ddata->vm.hactive)
> -		ret = -EINVAL;
> -
> -	if (mode->vdisplay != ddata->vm.vactive)
> -		ret = -EINVAL;
> +	drm_mode_probed_add(connector, mode);
>  
> -	if (ret) {
> -		dev_warn(dssdev->dev, "wrong resolution: %d x %d",
> -			 mode->hdisplay, mode->vdisplay);
> -		dev_warn(dssdev->dev, "panel resolution: %d x %d",
> -			 ddata->vm.hactive, ddata->vm.vactive);
> -	}
> -
> -	return ret;
> +	return 1;
>  }
>  
> -static const struct omap_dss_device_ops dsicm_ops = {
> -	.connect	= dsicm_connect,
> -	.disconnect	= dsicm_disconnect,
> -
> -	.pre_enable	= dsicm_pre_enable,
> -	.enable		= dsicm_enable,
> -	.disable	= dsicm_disable,
> -	.post_disable	= dsicm_post_disable,
> -
> -	.get_modes	= dsicm_get_modes,
> -	.check_timings	= dsicm_check_timings,
> +static const struct drm_panel_funcs dsicm_panel_funcs = {
> +	.unprepare = dsicm_unprepare,
> +	.disable = dsicm_disable,
> +	.prepare = dsicm_prepare,
> +	.enable = dsicm_enable,
> +	.get_modes = dsicm_get_modes,
>  };
>  
>  static int dsicm_probe_of(struct mipi_dsi_device *dsi)
> @@ -517,8 +478,12 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi)
>  	struct backlight_device *backlight;
>  	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
>  	struct display_timing timing;
> +	struct videomode vm = { 0 };

How about

	struct videomode vm = {
		.hactive = 864,
		.vactive = 480,
	};

>  	int err;
>  
> +	vm.hactive = 864;
> +	vm.vactive = 480;
> +
>  	ddata->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
>  	if (IS_ERR(ddata->reset_gpio)) {
>  		err = PTR_ERR(ddata->reset_gpio);
> @@ -528,15 +493,16 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi)
>  
>  	err = of_get_display_timing(node, "panel-timing", &timing);
>  	if (!err) {
> -		videomode_from_timing(&timing, &ddata->vm);
> -		if (!ddata->vm.pixelclock)
> -			ddata->vm.pixelclock =
> -				ddata->vm.hactive * ddata->vm.vactive * 60;
> +		videomode_from_timing(&timing, &vm);
>  	} else {
>  		dev_warn(&dsi->dev,
>  			 "failed to get video timing, using defaults\n");
>  	}
>  
> +	if (!vm.pixelclock)
> +		vm.pixelclock = vm.hactive * vm.vactive * 60;
> +	drm_display_mode_from_videomode(&vm, &ddata->mode);
> +
>  	ddata->width_mm = 0;
>  	of_property_read_u32(node, "width-mm", &ddata->width_mm);
>  
> @@ -570,7 +536,6 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>  	struct panel_drv_data *ddata;
>  	struct backlight_device *bldev = NULL;
>  	struct device *dev = &dsi->dev;
> -	struct omap_dss_device *dssdev;
>  	int r;
>  
>  	dev_dbg(dev, "probe\n");
> @@ -582,30 +547,17 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>  	mipi_dsi_set_drvdata(dsi, ddata);
>  	ddata->dsi = dsi;
>  
> -	ddata->vm.hactive = 864;
> -	ddata->vm.vactive = 480;
> -	ddata->vm.pixelclock = 864 * 480 * 60;
> -
>  	r = dsicm_probe_of(dsi);
>  	if (r)
>  		return r;
>  
> -	dssdev = &ddata->dssdev;
> -	dssdev->dev = dev;
> -	dssdev->ops = &dsicm_ops;
> -	dssdev->type = OMAP_DISPLAY_TYPE_DSI;
> -	dssdev->display = true;
> -	dssdev->owner = THIS_MODULE;
> -	dssdev->of_port = 0;
> -	dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
> -
> -	omapdss_display_init(dssdev);
> -	omapdss_device_register(dssdev);
> -
>  	mutex_init(&ddata->lock);
>  
>  	dsicm_hw_reset(ddata);
>  
> +	drm_panel_init(&ddata->panel, dev, &dsicm_panel_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +
>  	if (ddata->use_dsi_backlight) {
>  		struct backlight_properties props = { 0 };
>  		props.max_brightness = 255;
> @@ -637,6 +589,8 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>  	if (ddata->ulps_enabled)
>  		dsi->mode_flags |= MIPI_DSI_MODE_ULPS_IDLE;
>  
> +	drm_panel_add(&ddata->panel);
> +
>  	r = mipi_dsi_attach(dsi);
>  	if (r < 0)
>  		goto err_dsi_attach;
> @@ -644,6 +598,7 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>  	return 0;
>  
>  err_dsi_attach:
> +	drm_panel_remove(&ddata->panel);
>  	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
>  err_bl:
>  	if (ddata->extbldev)
> @@ -655,15 +610,12 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>  static int __exit dsicm_remove(struct mipi_dsi_device *dsi)
>  {
>  	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
> -	struct omap_dss_device *dssdev = &ddata->dssdev;
>  
>  	dev_dbg(&dsi->dev, "remove\n");
>  
>  	mipi_dsi_detach(dsi);
>  
> -	omapdss_device_unregister(dssdev);
> -
> -	omapdss_device_disconnect(ddata->src, dssdev);
> +	drm_panel_remove(&ddata->panel);
>  
>  	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
>  
> @@ -677,7 +629,7 @@ static int __exit dsicm_remove(struct mipi_dsi_device *dsi)
>  }
>  
>  static const struct of_device_id dsicm_of_match[] = {
> -	{ .compatible = "omapdss,panel-dsi-cm", },
> +	{ .compatible = "panel-dsi-cm", },
>  	{},
>  };
>  
> diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
> index 620cef8bb1f2..a1a867a7d91d 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dsi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
> @@ -36,6 +36,7 @@
>  #include <linux/sys_soc.h>
>  
>  #include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
>  #include <video/mipi_display.h>
>  
>  #include "omapdss.h"
> @@ -217,6 +218,8 @@ static int dsi_vc_send_null(struct dsi_data *dsi, int channel);
>  static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi,
>  				       const struct mipi_dsi_msg *msg);
>  
> +static void dsi_display_disable(struct omap_dss_device *dssdev);
> +

Could you reorder functions to avoid forward-declarations ? This can be
done on top if it generates annoying conflicts.

>  /* DSI PLL HSDIV indices */
>  #define HSDIV_DISPC	0
>  #define HSDIV_DSI	1
> @@ -383,6 +386,7 @@ struct dsi_data {
>  	bool te_enabled;
>  	bool ulps_enabled;
>  	bool ulps_auto_idle;
> +	bool video_enabled;
>  
>  	struct delayed_work ulps_work;
>  
> @@ -423,6 +427,8 @@ struct dsi_data {
>  
>  	unsigned int scp_clk_refcount;
>  
> +	struct omap_dss_dsi_config config;
> +
>  	struct dss_lcd_mgr_config mgr_config;
>  	struct videomode vm;
>  	enum mipi_dsi_pixel_format pix_fmt;
> @@ -3622,7 +3628,7 @@ static int dsi_configure_pins(struct omap_dss_device *dssdev,
>  	return 0;
>  }
>  
> -static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
> +static void dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>  {
>  	struct dsi_data *dsi = to_dsi_data(dssdev);
>  	int bpp = mipi_dsi_pixel_format_to_bpp(dsi->pix_fmt);
> @@ -3631,8 +3637,10 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>  	int r;
>  
>  	r = dsi_display_init_dispc(dsi);
> -	if (r)
> -		return r;
> +	if (r) {
> +		dev_err(dsi->dev, "failed to init dispc!\n");
> +		return;
> +	}
>  
>  	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
>  		switch (dsi->pix_fmt) {
> @@ -3672,7 +3680,7 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>  	if (r)
>  		goto err_mgr_enable;
>  
> -	return 0;
> +	return;
>  
>  err_mgr_enable:
>  	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
> @@ -3681,7 +3689,8 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>  	}
>  err_pix_fmt:
>  	dsi_display_uninit_dispc(dsi);
> -	return r;
> +	dev_err(dsi->dev, "failed to enable DSI encoder!\n");
> +	return;
>  }
>  
>  static void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
> @@ -3704,6 +3713,25 @@ static void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel
>  	dsi_display_uninit_dispc(dsi);
>  }
>  
> +static void dsi_disable_video_outputs(struct omap_dss_device *dssdev)
> +{
> +	struct dsi_data *dsi = to_dsi_data(dssdev);
> +	int i;
> +
> +	dsi_bus_lock(dsi);
> +	dsi->video_enabled = false;
> +
> +	for (i = 0; i < 3; i++) {
> +		if (!dsi->vc[i].dest)
> +			continue;
> +		dsi_disable_video_output(dssdev, i);
> +	}
> +
> +	dsi_display_disable(dssdev);
> +
> +	dsi_bus_unlock(dsi);
> +}
> +
>  static void dsi_update_screen_dispc(struct dsi_data *dsi)
>  {
>  	unsigned int bytespp;
> @@ -3897,6 +3925,11 @@ static int dsi_update_channel(struct omap_dss_device *dssdev, int channel)
>  
>  	dsi_bus_lock(dsi);
>  
> +	if (!dsi->video_enabled) {
> +		r = -EIO;
> +		goto err;
> +	}
> +
>  	if (!dsi->vc[channel].dest) {
>  		r = -ENODEV;
>  		goto err;
> @@ -3942,7 +3975,7 @@ static int dsi_update_all(struct omap_dss_device *dssdev)
>  
>  	for (i = 0; i < 4; i++) {
>  		r = dsi_update_channel(dssdev, i);
> -		if (r != -ENODEV)
> +		if (r && r != -ENODEV)

Does this belong to this patch ? I haven't flagged it when reviwing the
patch that introduced this code, assuming that you meant to exit from
the loop once a channel with a client is found, given that we don't
support multiple clients. In any case this should be coordinated with
dsi_enable_video_outputs() and dsi_disable_video_outputs(), all should
stop on the first client, or loop over all clients.

>  			return r;
>  	}
>  
> @@ -4165,8 +4198,30 @@ static void dsi_display_enable(struct omap_dss_device *dssdev)
>  {
>  	struct dsi_data *dsi = to_dsi_data(dssdev);
>  	DSSDBG("dsi_display_enable\n");
> -	dsi_bus_lock(dsi);
> +	WARN_ON(!dsi_bus_is_locked(dsi));
> +
>  	dsi_display_ulps_enable(dsi);
> +}
> +
> +static void dsi_enable_video_outputs(struct omap_dss_device *dssdev)
> +{
> +	struct dsi_data *dsi = to_dsi_data(dssdev);
> +	int i;

i should be unsigned.

> +
> +	dsi_bus_lock(dsi);
> +
> +	dsi_display_enable(dssdev);
> +
> +	for (i = 0; i < 3; i++) {
> +		if (!dsi->vc[i].dest)
> +			continue;
> +		dsi_enable_video_output(dssdev, i);
> +	}
> +
> +	dsi->video_enabled = true;
> +
> +	dsi_set_ulps_auto(dsi, true);
> +
>  	dsi_bus_unlock(dsi);
>  }
>  
> @@ -4193,11 +4248,11 @@ static void dsi_display_disable(struct omap_dss_device *dssdev)
>  {
>  	struct dsi_data *dsi = to_dsi_data(dssdev);
>  
> +	WARN_ON(!dsi_bus_is_locked(dsi));
> +
>  	DSSDBG("dsi_display_disable\n");
>  
> -	dsi_bus_lock(dsi);
>  	dsi_display_ulps_disable(dsi, true, false);
> -	dsi_bus_unlock(dsi);
>  }
>  
>  static int dsi_enable_te(struct dsi_data *dsi, bool enable)
> @@ -4735,14 +4790,18 @@ static bool dsi_is_video_mode(struct omap_dss_device *dssdev)
>  }
>  
>  static int dsi_set_config(struct omap_dss_device *dssdev,
> -		const struct omap_dss_dsi_config *config)
> +		const struct drm_display_mode *mode)
>  {
>  	struct dsi_data *dsi = to_dsi_data(dssdev);
>  	struct dsi_clk_calc_ctx ctx;
> -	struct omap_dss_dsi_config cfg = *config;
> +	struct videomode vm;
> +	struct omap_dss_dsi_config cfg = dsi->config;
>  	bool ok;
>  	int r;
>  
> +	drm_display_mode_to_videomode(mode, &vm);
> +	cfg.vm = &vm;
> +
>  	mutex_lock(&dsi->lock);
>  
>  	cfg.mode = dsi->mode;
> @@ -4906,9 +4965,15 @@ static ssize_t omap_dsi_host_transfer(struct mipi_dsi_host *host,
>  	int r;
>  
>  	dsi_bus_lock(dsi);
> -	dsi_set_ulps_auto(dsi, false);
> -	r = _omap_dsi_host_transfer(dsi, msg);
> -	dsi_set_ulps_auto(dsi, true);
> +
> +	if (dsi->video_enabled) {
> +		dsi_set_ulps_auto(dsi, false);
> +		r = _omap_dsi_host_transfer(dsi, msg);
> +		dsi_set_ulps_auto(dsi, true);
> +	} else {
> +		r = -EIO;
> +	}
> +
>  	dsi_bus_unlock(dsi);
>  
>  	return r;
> @@ -4929,6 +4994,23 @@ static int dsi_get_clocks(struct dsi_data *dsi)
>  	return 0;
>  }
>  
> +static void dsi_set_timings(struct omap_dss_device *dssdev,
> +			    const struct drm_display_mode *mode)
> +{
> +	DSSDBG("dsi_set_timings\n");
> +	dsi_set_config(dssdev, mode);
> +}
> +
> +static int dsi_check_timings(struct omap_dss_device *dssdev,
> +			     struct drm_display_mode *mode)
> +{
> +	DSSDBG("dsi_check_timings\n");
> +
> +	/* TODO */
> +
> +	return 0;
> +}
> +
>  static int dsi_connect(struct omap_dss_device *src,
>  		       struct omap_dss_device *dst)
>  {
> @@ -4944,15 +5026,13 @@ static void dsi_disconnect(struct omap_dss_device *src,
>  static const struct omap_dss_device_ops dsi_ops = {
>  	.connect = dsi_connect,
>  	.disconnect = dsi_disconnect,
> -	.enable = dsi_display_enable,
> -	.disable = dsi_display_disable,
> -
> -	.dsi = {
> -		.set_config = dsi_set_config,
> +	.enable = dsi_enable_video_outputs,
> +	.disable = dsi_disable_video_outputs,
>  
> -		.enable_video_output = dsi_enable_video_output,
> -		.disable_video_output = dsi_disable_video_output,
> +	.check_timings = dsi_check_timings,
> +	.set_timings = dsi_set_timings,
>  
> +	.dsi = {
>  		.update = dsi_update_all,
>  		.is_video_mode = dsi_is_video_mode,
>  	},
> @@ -5040,6 +5120,7 @@ static int omap_dsi_host_attach(struct mipi_dsi_host *host,
>  {
>  	struct dsi_data *dsi = host_to_omap(host);
>  	unsigned int channel = client->channel;
> +	struct drm_panel *panel;
>  	int r;
>  
>  	if (channel > 3)
> @@ -5057,6 +5138,10 @@ static int omap_dsi_host_attach(struct mipi_dsi_host *host,
>  
>  	dsi_bus_lock(dsi);
>  
> +	panel = of_drm_find_panel(client->dev.of_node);
> +	if (IS_ERR(panel))
> +		return PTR_ERR(panel);

Is it intended that the panel isn't used ?

> +
>  	atomic_set(&dsi->do_ext_te_update, 0);
>  
>  	if (client->mode_flags & MIPI_DSI_MODE_VIDEO) {
> @@ -5077,8 +5162,12 @@ static int omap_dsi_host_attach(struct mipi_dsi_host *host,
>  	INIT_DEFERRABLE_WORK(&dsi->ulps_work,
>  			     omap_dsi_ulps_work_callback);
>  
> +	dsi->config.hs_clk_min = 150000000; // TODO: get from client?
> +	dsi->config.hs_clk_max = client->hs_rate;
> +	dsi->config.lp_clk_min = 7000000; // TODO: get from client?
> +	dsi->config.lp_clk_max = client->lp_rate;
> +
>  	dsi->ulps_auto_idle = !!(client->mode_flags & MIPI_DSI_MODE_ULPS_IDLE);
> -	dsi_set_ulps_auto(dsi, true);
>  
>  	dsi_bus_unlock(dsi);
>  	return 0;
> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> index 72a7da7bfff1..18560ca4bbb0 100644
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> @@ -174,7 +174,6 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
>  };
>  
>  static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
> -	{ .compatible = "panel-dsi-cm" },
>  	{},
>  };
>  
> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> index 4200611525d5..3ee3063b6a2d 100644
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> @@ -278,14 +278,6 @@ struct omap_dss_writeback_info {
>  struct omapdss_dsi_ops {
>  	int (*update)(struct omap_dss_device *dssdev);
>  	bool (*is_video_mode)(struct omap_dss_device *dssdev);
> -
> -	/* legacy API used by omapdss panels */
> -	int (*set_config)(struct omap_dss_device *dssdev,
> -			const struct omap_dss_dsi_config *cfg);
> -
> -	int (*enable_video_output)(struct omap_dss_device *dssdev, int channel);
> -	void (*disable_video_output)(struct omap_dss_device *dssdev,
> -			int channel);
>  };
>  
>  struct omap_dss_device_ops {
Tomi Valkeinen Nov. 11, 2020, 3:54 p.m. UTC | #2
On 09/11/2020 12:39, Laurent Pinchart wrote:
> On Thu, Nov 05, 2020 at 02:03:10PM +0200, Tomi Valkeinen wrote:
>> From: Sebastian Reichel <sebastian.reichel@collabora.com>
>>
>> This converts the DSI module to expect common drm_panel display
>> drivers instead of dssdev based ones.
>>
>> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> ---
>>  .../gpu/drm/omapdrm/displays/panel-dsi-cm.c   | 204 +++++++-----------
>>  drivers/gpu/drm/omapdrm/dss/dsi.c             | 133 ++++++++++--
>>  .../gpu/drm/omapdrm/dss/omapdss-boot-init.c   |   1 -
>>  drivers/gpu/drm/omapdrm/dss/omapdss.h         |   8 -
>>  4 files changed, 189 insertions(+), 157 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
>> index d9b3444b4faf..3668b3f0aff2 100644
>> --- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
>> +++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
>> @@ -6,8 +6,6 @@
>>   * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
>>   */
>>  
>> -/* #define DEBUG */
>> -
>>  #include <linux/backlight.h>
>>  #include <linux/delay.h>
>>  #include <linux/gpio/consumer.h>
>> @@ -20,11 +18,14 @@
>>  #include <linux/regulator/consumer.h>
>>  
>>  #include <drm/drm_connector.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_modes.h>
> 
> Alphabetically ordered please.
> 
>>  
>> +#include <video/display_timing.h>
>>  #include <video/mipi_display.h>
>>  #include <video/of_display_timing.h>
>> -
>> -#include "../dss/omapdss.h"
>> +#include <video/videomode.h>
>>  
>>  #define DCS_READ_NUM_ERRORS	0x05
>>  #define DCS_GET_ID1		0xda
>> @@ -35,11 +36,8 @@
>>  
>>  struct panel_drv_data {
>>  	struct mipi_dsi_device *dsi;
>> -
>> -	struct omap_dss_device dssdev;
>> -	struct omap_dss_device *src;
>> -
>> -	struct videomode vm;
>> +	struct drm_panel panel;
>> +	struct drm_display_mode mode;
>>  
>>  	struct mutex lock;
>>  
>> @@ -71,7 +69,11 @@ struct panel_drv_data {
>>  	bool ulps_enabled;
>>  };
>>  
>> -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
>> +
> 
> A single blank line is enough.
> 
>> +static inline struct panel_drv_data *panel_to_ddata(struct drm_panel *panel)
>> +{
>> +	return container_of(panel, struct panel_drv_data, panel);
>> +}
>>  
>>  static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
>>  
>> @@ -285,7 +287,6 @@ static void dsicm_hw_reset(struct panel_drv_data *ddata)
>>  
>>  static int dsicm_power_on(struct panel_drv_data *ddata)
>>  {
>> -	struct omap_dss_device *src = ddata->src;
>>  	u8 id1, id2, id3;
>>  	int r;
>>  
>> @@ -322,10 +323,6 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
>>  	if (r)
>>  		goto err;
>>  
>> -	r = src->ops->dsi.enable_video_output(src, ddata->dsi->channel);
>> -	if (r)
>> -		goto err;
>> -
>>  	ddata->enabled = true;
>>  
>>  	if (!ddata->intro_printed) {
>> @@ -345,15 +342,12 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
>>  	return r;
>>  }
>>  
>> -static void dsicm_power_off(struct panel_drv_data *ddata)
>> +static int dsicm_power_off(struct panel_drv_data *ddata)
>>  {
>> -	struct omap_dss_device *src = ddata->src;
>>  	int r;
>>  
>>  	ddata->enabled = false;
>>  
>> -	src->ops->dsi.disable_video_output(src, ddata->dsi->channel);
>> -
>>  	r = mipi_dsi_dcs_set_display_off(ddata->dsi);
>>  	if (!r)
>>  		r = dsicm_sleep_in(ddata);
>> @@ -363,51 +357,25 @@ static void dsicm_power_off(struct panel_drv_data *ddata)
>>  				"error disabling panel, issuing HW reset\n");
>>  		dsicm_hw_reset(ddata);
>>  	}
>> -}
>> -
>> -static int dsicm_connect(struct omap_dss_device *src,
>> -			 struct omap_dss_device *dst)
>> -{
>> -	struct panel_drv_data *ddata = to_panel_data(dst);
>> -
>> -	ddata->src = src;
>> -	return 0;
>> -}
>> -
>> -static void dsicm_disconnect(struct omap_dss_device *src,
>> -			     struct omap_dss_device *dst)
>> -{
>> -	struct panel_drv_data *ddata = to_panel_data(dst);
>>  
>> -	ddata->src = NULL;
>> +	return r;
>>  }
>>  
>> -static void dsicm_pre_enable(struct omap_dss_device *dssdev)
>> +static int dsicm_prepare(struct drm_panel *panel)
>>  {
>> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
>> -	struct omap_dss_device *src = ddata->src;
>> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
>>  	int r;
>> -	struct omap_dss_dsi_config dsi_config = {
>> -		.vm = &ddata->vm,
>> -		.hs_clk_min = 150000000,
>> -		.hs_clk_max = 300000000,
>> -		.lp_clk_min = 7000000,
>> -		.lp_clk_max = 10000000,
>> -	};
>>  
>>  	r = regulator_bulk_enable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
>>  	if (r)
>>  		dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r);
>>  
>> -	r = src->ops->dsi.set_config(src, &dsi_config);
>> -	if (r) {
>> -		dev_err(&ddata->dsi->dev, "failed to configure DSI\n");
>> -	}
>> +	return r;
>>  }
>>  
>> -static void dsicm_enable(struct omap_dss_device *dssdev)
>> +static int dsicm_enable(struct drm_panel *panel)
>>  {
>> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
>> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
>>  	int r;
>>  
>>  	mutex_lock(&ddata->lock);
>> @@ -420,33 +388,39 @@ static void dsicm_enable(struct omap_dss_device *dssdev)
>>  
>>  	dsicm_bl_power(ddata, true);
>>  
>> -	return;
>> +	return 0;
>>  err:
>> -	dev_dbg(&ddata->dsi->dev, "enable failed (%d)\n", r);
>> +	dev_err(&ddata->dsi->dev, "enable failed (%d)\n", r);
>>  	mutex_unlock(&ddata->lock);
>> +	return r;
>> +}
>> +
>> +static int dsicm_unprepare(struct drm_panel *panel)
>> +{
>> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
>> +	int r;
>> +
>> +	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
>> +	if (r)
>> +		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
>> +
>> +	return r;
>>  }
>>  
>> -static void dsicm_disable(struct omap_dss_device *dssdev)
>> +static int dsicm_disable(struct drm_panel *panel)
>>  {
>> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
>> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
>> +	int r;
>>  
>>  	dsicm_bl_power(ddata, false);
>>  
>>  	mutex_lock(&ddata->lock);
>>  
>> -	dsicm_power_off(ddata);
>> +	r = dsicm_power_off(ddata);
>>  
>>  	mutex_unlock(&ddata->lock);
>> -}
>> -
>> -static void dsicm_post_disable(struct omap_dss_device *dssdev)
>> -{
>> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
>> -	int r;
>>  
>> -	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
>> -	if (r)
>> -		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
>> +	return r;
>>  }
>>  
>>  static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
>> @@ -465,50 +439,37 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
>>  	return r;
>>  }
>>  
>> -static int dsicm_get_modes(struct omap_dss_device *dssdev,
>> +static int dsicm_get_modes(struct drm_panel *panel,
>>  			   struct drm_connector *connector)
>>  {
>> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
>> +	struct panel_drv_data *ddata = panel_to_ddata(panel);
>> +	struct drm_display_mode *mode;
>> +
>> +	mode = drm_mode_duplicate(connector->dev, &ddata->mode);
>> +	if (!mode) {
>> +		dev_err(&ddata->dsi->dev, "failed to add mode %ux%ux@%u kHz\n",
>> +			ddata->mode.hdisplay, ddata->mode.vdisplay,
>> +			ddata->mode.clock);
>> +		return -ENOMEM;
>> +	}
>> +
>> +	drm_mode_set_name(mode);
>> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>>  
>>  	connector->display_info.width_mm = ddata->width_mm;
>>  	connector->display_info.height_mm = ddata->height_mm;
>>  
>> -	return omapdss_display_get_modes(connector, &ddata->vm);
>> -}
>> -
>> -static int dsicm_check_timings(struct omap_dss_device *dssdev,
>> -			       struct drm_display_mode *mode)
>> -{
>> -	struct panel_drv_data *ddata = to_panel_data(dssdev);
>> -	int ret = 0;
>> -
>> -	if (mode->hdisplay != ddata->vm.hactive)
>> -		ret = -EINVAL;
>> -
>> -	if (mode->vdisplay != ddata->vm.vactive)
>> -		ret = -EINVAL;
>> +	drm_mode_probed_add(connector, mode);
>>  
>> -	if (ret) {
>> -		dev_warn(dssdev->dev, "wrong resolution: %d x %d",
>> -			 mode->hdisplay, mode->vdisplay);
>> -		dev_warn(dssdev->dev, "panel resolution: %d x %d",
>> -			 ddata->vm.hactive, ddata->vm.vactive);
>> -	}
>> -
>> -	return ret;
>> +	return 1;
>>  }
>>  
>> -static const struct omap_dss_device_ops dsicm_ops = {
>> -	.connect	= dsicm_connect,
>> -	.disconnect	= dsicm_disconnect,
>> -
>> -	.pre_enable	= dsicm_pre_enable,
>> -	.enable		= dsicm_enable,
>> -	.disable	= dsicm_disable,
>> -	.post_disable	= dsicm_post_disable,
>> -
>> -	.get_modes	= dsicm_get_modes,
>> -	.check_timings	= dsicm_check_timings,
>> +static const struct drm_panel_funcs dsicm_panel_funcs = {
>> +	.unprepare = dsicm_unprepare,
>> +	.disable = dsicm_disable,
>> +	.prepare = dsicm_prepare,
>> +	.enable = dsicm_enable,
>> +	.get_modes = dsicm_get_modes,
>>  };
>>  
>>  static int dsicm_probe_of(struct mipi_dsi_device *dsi)
>> @@ -517,8 +478,12 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi)
>>  	struct backlight_device *backlight;
>>  	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
>>  	struct display_timing timing;
>> +	struct videomode vm = { 0 };
> 
> How about
> 
> 	struct videomode vm = {
> 		.hactive = 864,
> 		.vactive = 480,
> 	};
> 
>>  	int err;
>>  
>> +	vm.hactive = 864;
>> +	vm.vactive = 480;
>> +
>>  	ddata->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
>>  	if (IS_ERR(ddata->reset_gpio)) {
>>  		err = PTR_ERR(ddata->reset_gpio);
>> @@ -528,15 +493,16 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi)
>>  
>>  	err = of_get_display_timing(node, "panel-timing", &timing);
>>  	if (!err) {
>> -		videomode_from_timing(&timing, &ddata->vm);
>> -		if (!ddata->vm.pixelclock)
>> -			ddata->vm.pixelclock =
>> -				ddata->vm.hactive * ddata->vm.vactive * 60;
>> +		videomode_from_timing(&timing, &vm);
>>  	} else {
>>  		dev_warn(&dsi->dev,
>>  			 "failed to get video timing, using defaults\n");
>>  	}
>>  
>> +	if (!vm.pixelclock)
>> +		vm.pixelclock = vm.hactive * vm.vactive * 60;
>> +	drm_display_mode_from_videomode(&vm, &ddata->mode);
>> +
>>  	ddata->width_mm = 0;
>>  	of_property_read_u32(node, "width-mm", &ddata->width_mm);
>>  
>> @@ -570,7 +536,6 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>>  	struct panel_drv_data *ddata;
>>  	struct backlight_device *bldev = NULL;
>>  	struct device *dev = &dsi->dev;
>> -	struct omap_dss_device *dssdev;
>>  	int r;
>>  
>>  	dev_dbg(dev, "probe\n");
>> @@ -582,30 +547,17 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>>  	mipi_dsi_set_drvdata(dsi, ddata);
>>  	ddata->dsi = dsi;
>>  
>> -	ddata->vm.hactive = 864;
>> -	ddata->vm.vactive = 480;
>> -	ddata->vm.pixelclock = 864 * 480 * 60;
>> -
>>  	r = dsicm_probe_of(dsi);
>>  	if (r)
>>  		return r;
>>  
>> -	dssdev = &ddata->dssdev;
>> -	dssdev->dev = dev;
>> -	dssdev->ops = &dsicm_ops;
>> -	dssdev->type = OMAP_DISPLAY_TYPE_DSI;
>> -	dssdev->display = true;
>> -	dssdev->owner = THIS_MODULE;
>> -	dssdev->of_port = 0;
>> -	dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
>> -
>> -	omapdss_display_init(dssdev);
>> -	omapdss_device_register(dssdev);
>> -
>>  	mutex_init(&ddata->lock);
>>  
>>  	dsicm_hw_reset(ddata);
>>  
>> +	drm_panel_init(&ddata->panel, dev, &dsicm_panel_funcs,
>> +		       DRM_MODE_CONNECTOR_DSI);
>> +
>>  	if (ddata->use_dsi_backlight) {
>>  		struct backlight_properties props = { 0 };
>>  		props.max_brightness = 255;
>> @@ -637,6 +589,8 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>>  	if (ddata->ulps_enabled)
>>  		dsi->mode_flags |= MIPI_DSI_MODE_ULPS_IDLE;
>>  
>> +	drm_panel_add(&ddata->panel);
>> +
>>  	r = mipi_dsi_attach(dsi);
>>  	if (r < 0)
>>  		goto err_dsi_attach;
>> @@ -644,6 +598,7 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>>  	return 0;
>>  
>>  err_dsi_attach:
>> +	drm_panel_remove(&ddata->panel);
>>  	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
>>  err_bl:
>>  	if (ddata->extbldev)
>> @@ -655,15 +610,12 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
>>  static int __exit dsicm_remove(struct mipi_dsi_device *dsi)
>>  {
>>  	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
>> -	struct omap_dss_device *dssdev = &ddata->dssdev;
>>  
>>  	dev_dbg(&dsi->dev, "remove\n");
>>  
>>  	mipi_dsi_detach(dsi);
>>  
>> -	omapdss_device_unregister(dssdev);
>> -
>> -	omapdss_device_disconnect(ddata->src, dssdev);
>> +	drm_panel_remove(&ddata->panel);
>>  
>>  	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
>>  
>> @@ -677,7 +629,7 @@ static int __exit dsicm_remove(struct mipi_dsi_device *dsi)
>>  }
>>  
>>  static const struct of_device_id dsicm_of_match[] = {
>> -	{ .compatible = "omapdss,panel-dsi-cm", },
>> +	{ .compatible = "panel-dsi-cm", },
>>  	{},
>>  };
>>  
>> diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
>> index 620cef8bb1f2..a1a867a7d91d 100644
>> --- a/drivers/gpu/drm/omapdrm/dss/dsi.c
>> +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
>> @@ -36,6 +36,7 @@
>>  #include <linux/sys_soc.h>
>>  
>>  #include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_panel.h>
>>  #include <video/mipi_display.h>
>>  
>>  #include "omapdss.h"
>> @@ -217,6 +218,8 @@ static int dsi_vc_send_null(struct dsi_data *dsi, int channel);
>>  static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi,
>>  				       const struct mipi_dsi_msg *msg);
>>  
>> +static void dsi_display_disable(struct omap_dss_device *dssdev);
>> +
> 
> Could you reorder functions to avoid forward-declarations ? This can be
> done on top if it generates annoying conflicts.
> 
>>  /* DSI PLL HSDIV indices */
>>  #define HSDIV_DISPC	0
>>  #define HSDIV_DSI	1
>> @@ -383,6 +386,7 @@ struct dsi_data {
>>  	bool te_enabled;
>>  	bool ulps_enabled;
>>  	bool ulps_auto_idle;
>> +	bool video_enabled;
>>  
>>  	struct delayed_work ulps_work;
>>  
>> @@ -423,6 +427,8 @@ struct dsi_data {
>>  
>>  	unsigned int scp_clk_refcount;
>>  
>> +	struct omap_dss_dsi_config config;
>> +
>>  	struct dss_lcd_mgr_config mgr_config;
>>  	struct videomode vm;
>>  	enum mipi_dsi_pixel_format pix_fmt;
>> @@ -3622,7 +3628,7 @@ static int dsi_configure_pins(struct omap_dss_device *dssdev,
>>  	return 0;
>>  }
>>  
>> -static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>> +static void dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>>  {
>>  	struct dsi_data *dsi = to_dsi_data(dssdev);
>>  	int bpp = mipi_dsi_pixel_format_to_bpp(dsi->pix_fmt);
>> @@ -3631,8 +3637,10 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>>  	int r;
>>  
>>  	r = dsi_display_init_dispc(dsi);
>> -	if (r)
>> -		return r;
>> +	if (r) {
>> +		dev_err(dsi->dev, "failed to init dispc!\n");
>> +		return;
>> +	}
>>  
>>  	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
>>  		switch (dsi->pix_fmt) {
>> @@ -3672,7 +3680,7 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>>  	if (r)
>>  		goto err_mgr_enable;
>>  
>> -	return 0;
>> +	return;
>>  
>>  err_mgr_enable:
>>  	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
>> @@ -3681,7 +3689,8 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
>>  	}
>>  err_pix_fmt:
>>  	dsi_display_uninit_dispc(dsi);
>> -	return r;
>> +	dev_err(dsi->dev, "failed to enable DSI encoder!\n");
>> +	return;
>>  }
>>  
>>  static void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
>> @@ -3704,6 +3713,25 @@ static void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel
>>  	dsi_display_uninit_dispc(dsi);
>>  }
>>  
>> +static void dsi_disable_video_outputs(struct omap_dss_device *dssdev)
>> +{
>> +	struct dsi_data *dsi = to_dsi_data(dssdev);
>> +	int i;
>> +
>> +	dsi_bus_lock(dsi);
>> +	dsi->video_enabled = false;
>> +
>> +	for (i = 0; i < 3; i++) {
>> +		if (!dsi->vc[i].dest)
>> +			continue;
>> +		dsi_disable_video_output(dssdev, i);
>> +	}
>> +
>> +	dsi_display_disable(dssdev);
>> +
>> +	dsi_bus_unlock(dsi);
>> +}
>> +
>>  static void dsi_update_screen_dispc(struct dsi_data *dsi)
>>  {
>>  	unsigned int bytespp;
>> @@ -3897,6 +3925,11 @@ static int dsi_update_channel(struct omap_dss_device *dssdev, int channel)
>>  
>>  	dsi_bus_lock(dsi);
>>  
>> +	if (!dsi->video_enabled) {
>> +		r = -EIO;
>> +		goto err;
>> +	}
>> +
>>  	if (!dsi->vc[channel].dest) {
>>  		r = -ENODEV;
>>  		goto err;
>> @@ -3942,7 +3975,7 @@ static int dsi_update_all(struct omap_dss_device *dssdev)
>>  
>>  	for (i = 0; i < 4; i++) {
>>  		r = dsi_update_channel(dssdev, i);
>> -		if (r != -ENODEV)
>> +		if (r && r != -ENODEV)
> 
> Does this belong to this patch ? I haven't flagged it when reviwing the
> patch that introduced this code, assuming that you meant to exit from
> the loop once a channel with a client is found, given that we don't
> support multiple clients. In any case this should be coordinated with
> dsi_enable_video_outputs() and dsi_disable_video_outputs(), all should
> stop on the first client, or loop over all clients.

Yes, it should be in an earlier patch.

I think this code needs more work, but in any case this change belongs to the patch that added
dsi_update_all.

>> @@ -5057,6 +5138,10 @@ static int omap_dsi_host_attach(struct mipi_dsi_host *host,
>>  
>>  	dsi_bus_lock(dsi);
>>  
>> +	panel = of_drm_find_panel(client->dev.of_node);
>> +	if (IS_ERR(panel))
>> +		return PTR_ERR(panel);
> 
> Is it intended that the panel isn't used ?

I think it's left over code. I'll drop.

 Tomi
diff mbox series

Patch

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index d9b3444b4faf..3668b3f0aff2 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -6,8 +6,6 @@ 
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
  */
 
-/* #define DEBUG */
-
 #include <linux/backlight.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
@@ -20,11 +18,14 @@ 
 #include <linux/regulator/consumer.h>
 
 #include <drm/drm_connector.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_modes.h>
 
+#include <video/display_timing.h>
 #include <video/mipi_display.h>
 #include <video/of_display_timing.h>
-
-#include "../dss/omapdss.h"
+#include <video/videomode.h>
 
 #define DCS_READ_NUM_ERRORS	0x05
 #define DCS_GET_ID1		0xda
@@ -35,11 +36,8 @@ 
 
 struct panel_drv_data {
 	struct mipi_dsi_device *dsi;
-
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *src;
-
-	struct videomode vm;
+	struct drm_panel panel;
+	struct drm_display_mode mode;
 
 	struct mutex lock;
 
@@ -71,7 +69,11 @@  struct panel_drv_data {
 	bool ulps_enabled;
 };
 
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static inline struct panel_drv_data *panel_to_ddata(struct drm_panel *panel)
+{
+	return container_of(panel, struct panel_drv_data, panel);
+}
 
 static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
 
@@ -285,7 +287,6 @@  static void dsicm_hw_reset(struct panel_drv_data *ddata)
 
 static int dsicm_power_on(struct panel_drv_data *ddata)
 {
-	struct omap_dss_device *src = ddata->src;
 	u8 id1, id2, id3;
 	int r;
 
@@ -322,10 +323,6 @@  static int dsicm_power_on(struct panel_drv_data *ddata)
 	if (r)
 		goto err;
 
-	r = src->ops->dsi.enable_video_output(src, ddata->dsi->channel);
-	if (r)
-		goto err;
-
 	ddata->enabled = true;
 
 	if (!ddata->intro_printed) {
@@ -345,15 +342,12 @@  static int dsicm_power_on(struct panel_drv_data *ddata)
 	return r;
 }
 
-static void dsicm_power_off(struct panel_drv_data *ddata)
+static int dsicm_power_off(struct panel_drv_data *ddata)
 {
-	struct omap_dss_device *src = ddata->src;
 	int r;
 
 	ddata->enabled = false;
 
-	src->ops->dsi.disable_video_output(src, ddata->dsi->channel);
-
 	r = mipi_dsi_dcs_set_display_off(ddata->dsi);
 	if (!r)
 		r = dsicm_sleep_in(ddata);
@@ -363,51 +357,25 @@  static void dsicm_power_off(struct panel_drv_data *ddata)
 				"error disabling panel, issuing HW reset\n");
 		dsicm_hw_reset(ddata);
 	}
-}
-
-static int dsicm_connect(struct omap_dss_device *src,
-			 struct omap_dss_device *dst)
-{
-	struct panel_drv_data *ddata = to_panel_data(dst);
-
-	ddata->src = src;
-	return 0;
-}
-
-static void dsicm_disconnect(struct omap_dss_device *src,
-			     struct omap_dss_device *dst)
-{
-	struct panel_drv_data *ddata = to_panel_data(dst);
 
-	ddata->src = NULL;
+	return r;
 }
 
-static void dsicm_pre_enable(struct omap_dss_device *dssdev)
+static int dsicm_prepare(struct drm_panel *panel)
 {
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *src = ddata->src;
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
 	int r;
-	struct omap_dss_dsi_config dsi_config = {
-		.vm = &ddata->vm,
-		.hs_clk_min = 150000000,
-		.hs_clk_max = 300000000,
-		.lp_clk_min = 7000000,
-		.lp_clk_max = 10000000,
-	};
 
 	r = regulator_bulk_enable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
 	if (r)
 		dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r);
 
-	r = src->ops->dsi.set_config(src, &dsi_config);
-	if (r) {
-		dev_err(&ddata->dsi->dev, "failed to configure DSI\n");
-	}
+	return r;
 }
 
-static void dsicm_enable(struct omap_dss_device *dssdev)
+static int dsicm_enable(struct drm_panel *panel)
 {
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
 	int r;
 
 	mutex_lock(&ddata->lock);
@@ -420,33 +388,39 @@  static void dsicm_enable(struct omap_dss_device *dssdev)
 
 	dsicm_bl_power(ddata, true);
 
-	return;
+	return 0;
 err:
-	dev_dbg(&ddata->dsi->dev, "enable failed (%d)\n", r);
+	dev_err(&ddata->dsi->dev, "enable failed (%d)\n", r);
 	mutex_unlock(&ddata->lock);
+	return r;
+}
+
+static int dsicm_unprepare(struct drm_panel *panel)
+{
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	int r;
+
+	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
+	if (r)
+		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
+
+	return r;
 }
 
-static void dsicm_disable(struct omap_dss_device *dssdev)
+static int dsicm_disable(struct drm_panel *panel)
 {
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	int r;
 
 	dsicm_bl_power(ddata, false);
 
 	mutex_lock(&ddata->lock);
 
-	dsicm_power_off(ddata);
+	r = dsicm_power_off(ddata);
 
 	mutex_unlock(&ddata->lock);
-}
-
-static void dsicm_post_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	int r;
 
-	r = regulator_bulk_disable(DCS_REGULATOR_SUPPLY_NUM, ddata->supplies);
-	if (r)
-		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
+	return r;
 }
 
 static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
@@ -465,50 +439,37 @@  static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 	return r;
 }
 
-static int dsicm_get_modes(struct omap_dss_device *dssdev,
+static int dsicm_get_modes(struct drm_panel *panel,
 			   struct drm_connector *connector)
 {
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &ddata->mode);
+	if (!mode) {
+		dev_err(&ddata->dsi->dev, "failed to add mode %ux%ux@%u kHz\n",
+			ddata->mode.hdisplay, ddata->mode.vdisplay,
+			ddata->mode.clock);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
 
 	connector->display_info.width_mm = ddata->width_mm;
 	connector->display_info.height_mm = ddata->height_mm;
 
-	return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static int dsicm_check_timings(struct omap_dss_device *dssdev,
-			       struct drm_display_mode *mode)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	int ret = 0;
-
-	if (mode->hdisplay != ddata->vm.hactive)
-		ret = -EINVAL;
-
-	if (mode->vdisplay != ddata->vm.vactive)
-		ret = -EINVAL;
+	drm_mode_probed_add(connector, mode);
 
-	if (ret) {
-		dev_warn(dssdev->dev, "wrong resolution: %d x %d",
-			 mode->hdisplay, mode->vdisplay);
-		dev_warn(dssdev->dev, "panel resolution: %d x %d",
-			 ddata->vm.hactive, ddata->vm.vactive);
-	}
-
-	return ret;
+	return 1;
 }
 
-static const struct omap_dss_device_ops dsicm_ops = {
-	.connect	= dsicm_connect,
-	.disconnect	= dsicm_disconnect,
-
-	.pre_enable	= dsicm_pre_enable,
-	.enable		= dsicm_enable,
-	.disable	= dsicm_disable,
-	.post_disable	= dsicm_post_disable,
-
-	.get_modes	= dsicm_get_modes,
-	.check_timings	= dsicm_check_timings,
+static const struct drm_panel_funcs dsicm_panel_funcs = {
+	.unprepare = dsicm_unprepare,
+	.disable = dsicm_disable,
+	.prepare = dsicm_prepare,
+	.enable = dsicm_enable,
+	.get_modes = dsicm_get_modes,
 };
 
 static int dsicm_probe_of(struct mipi_dsi_device *dsi)
@@ -517,8 +478,12 @@  static int dsicm_probe_of(struct mipi_dsi_device *dsi)
 	struct backlight_device *backlight;
 	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
 	struct display_timing timing;
+	struct videomode vm = { 0 };
 	int err;
 
+	vm.hactive = 864;
+	vm.vactive = 480;
+
 	ddata->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ddata->reset_gpio)) {
 		err = PTR_ERR(ddata->reset_gpio);
@@ -528,15 +493,16 @@  static int dsicm_probe_of(struct mipi_dsi_device *dsi)
 
 	err = of_get_display_timing(node, "panel-timing", &timing);
 	if (!err) {
-		videomode_from_timing(&timing, &ddata->vm);
-		if (!ddata->vm.pixelclock)
-			ddata->vm.pixelclock =
-				ddata->vm.hactive * ddata->vm.vactive * 60;
+		videomode_from_timing(&timing, &vm);
 	} else {
 		dev_warn(&dsi->dev,
 			 "failed to get video timing, using defaults\n");
 	}
 
+	if (!vm.pixelclock)
+		vm.pixelclock = vm.hactive * vm.vactive * 60;
+	drm_display_mode_from_videomode(&vm, &ddata->mode);
+
 	ddata->width_mm = 0;
 	of_property_read_u32(node, "width-mm", &ddata->width_mm);
 
@@ -570,7 +536,6 @@  static int dsicm_probe(struct mipi_dsi_device *dsi)
 	struct panel_drv_data *ddata;
 	struct backlight_device *bldev = NULL;
 	struct device *dev = &dsi->dev;
-	struct omap_dss_device *dssdev;
 	int r;
 
 	dev_dbg(dev, "probe\n");
@@ -582,30 +547,17 @@  static int dsicm_probe(struct mipi_dsi_device *dsi)
 	mipi_dsi_set_drvdata(dsi, ddata);
 	ddata->dsi = dsi;
 
-	ddata->vm.hactive = 864;
-	ddata->vm.vactive = 480;
-	ddata->vm.pixelclock = 864 * 480 * 60;
-
 	r = dsicm_probe_of(dsi);
 	if (r)
 		return r;
 
-	dssdev = &ddata->dssdev;
-	dssdev->dev = dev;
-	dssdev->ops = &dsicm_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DSI;
-	dssdev->display = true;
-	dssdev->owner = THIS_MODULE;
-	dssdev->of_port = 0;
-	dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
-
-	omapdss_display_init(dssdev);
-	omapdss_device_register(dssdev);
-
 	mutex_init(&ddata->lock);
 
 	dsicm_hw_reset(ddata);
 
+	drm_panel_init(&ddata->panel, dev, &dsicm_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
 	if (ddata->use_dsi_backlight) {
 		struct backlight_properties props = { 0 };
 		props.max_brightness = 255;
@@ -637,6 +589,8 @@  static int dsicm_probe(struct mipi_dsi_device *dsi)
 	if (ddata->ulps_enabled)
 		dsi->mode_flags |= MIPI_DSI_MODE_ULPS_IDLE;
 
+	drm_panel_add(&ddata->panel);
+
 	r = mipi_dsi_attach(dsi);
 	if (r < 0)
 		goto err_dsi_attach;
@@ -644,6 +598,7 @@  static int dsicm_probe(struct mipi_dsi_device *dsi)
 	return 0;
 
 err_dsi_attach:
+	drm_panel_remove(&ddata->panel);
 	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
 err_bl:
 	if (ddata->extbldev)
@@ -655,15 +610,12 @@  static int dsicm_probe(struct mipi_dsi_device *dsi)
 static int __exit dsicm_remove(struct mipi_dsi_device *dsi)
 {
 	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
 
 	dev_dbg(&dsi->dev, "remove\n");
 
 	mipi_dsi_detach(dsi);
 
-	omapdss_device_unregister(dssdev);
-
-	omapdss_device_disconnect(ddata->src, dssdev);
+	drm_panel_remove(&ddata->panel);
 
 	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
 
@@ -677,7 +629,7 @@  static int __exit dsicm_remove(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id dsicm_of_match[] = {
-	{ .compatible = "omapdss,panel-dsi-cm", },
+	{ .compatible = "panel-dsi-cm", },
 	{},
 };
 
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 620cef8bb1f2..a1a867a7d91d 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -36,6 +36,7 @@ 
 #include <linux/sys_soc.h>
 
 #include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
 #include <video/mipi_display.h>
 
 #include "omapdss.h"
@@ -217,6 +218,8 @@  static int dsi_vc_send_null(struct dsi_data *dsi, int channel);
 static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi,
 				       const struct mipi_dsi_msg *msg);
 
+static void dsi_display_disable(struct omap_dss_device *dssdev);
+
 /* DSI PLL HSDIV indices */
 #define HSDIV_DISPC	0
 #define HSDIV_DSI	1
@@ -383,6 +386,7 @@  struct dsi_data {
 	bool te_enabled;
 	bool ulps_enabled;
 	bool ulps_auto_idle;
+	bool video_enabled;
 
 	struct delayed_work ulps_work;
 
@@ -423,6 +427,8 @@  struct dsi_data {
 
 	unsigned int scp_clk_refcount;
 
+	struct omap_dss_dsi_config config;
+
 	struct dss_lcd_mgr_config mgr_config;
 	struct videomode vm;
 	enum mipi_dsi_pixel_format pix_fmt;
@@ -3622,7 +3628,7 @@  static int dsi_configure_pins(struct omap_dss_device *dssdev,
 	return 0;
 }
 
-static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
+static void dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct dsi_data *dsi = to_dsi_data(dssdev);
 	int bpp = mipi_dsi_pixel_format_to_bpp(dsi->pix_fmt);
@@ -3631,8 +3637,10 @@  static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 	int r;
 
 	r = dsi_display_init_dispc(dsi);
-	if (r)
-		return r;
+	if (r) {
+		dev_err(dsi->dev, "failed to init dispc!\n");
+		return;
+	}
 
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		switch (dsi->pix_fmt) {
@@ -3672,7 +3680,7 @@  static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 	if (r)
 		goto err_mgr_enable;
 
-	return 0;
+	return;
 
 err_mgr_enable:
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
@@ -3681,7 +3689,8 @@  static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 	}
 err_pix_fmt:
 	dsi_display_uninit_dispc(dsi);
-	return r;
+	dev_err(dsi->dev, "failed to enable DSI encoder!\n");
+	return;
 }
 
 static void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
@@ -3704,6 +3713,25 @@  static void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel
 	dsi_display_uninit_dispc(dsi);
 }
 
+static void dsi_disable_video_outputs(struct omap_dss_device *dssdev)
+{
+	struct dsi_data *dsi = to_dsi_data(dssdev);
+	int i;
+
+	dsi_bus_lock(dsi);
+	dsi->video_enabled = false;
+
+	for (i = 0; i < 3; i++) {
+		if (!dsi->vc[i].dest)
+			continue;
+		dsi_disable_video_output(dssdev, i);
+	}
+
+	dsi_display_disable(dssdev);
+
+	dsi_bus_unlock(dsi);
+}
+
 static void dsi_update_screen_dispc(struct dsi_data *dsi)
 {
 	unsigned int bytespp;
@@ -3897,6 +3925,11 @@  static int dsi_update_channel(struct omap_dss_device *dssdev, int channel)
 
 	dsi_bus_lock(dsi);
 
+	if (!dsi->video_enabled) {
+		r = -EIO;
+		goto err;
+	}
+
 	if (!dsi->vc[channel].dest) {
 		r = -ENODEV;
 		goto err;
@@ -3942,7 +3975,7 @@  static int dsi_update_all(struct omap_dss_device *dssdev)
 
 	for (i = 0; i < 4; i++) {
 		r = dsi_update_channel(dssdev, i);
-		if (r != -ENODEV)
+		if (r && r != -ENODEV)
 			return r;
 	}
 
@@ -4165,8 +4198,30 @@  static void dsi_display_enable(struct omap_dss_device *dssdev)
 {
 	struct dsi_data *dsi = to_dsi_data(dssdev);
 	DSSDBG("dsi_display_enable\n");
-	dsi_bus_lock(dsi);
+	WARN_ON(!dsi_bus_is_locked(dsi));
+
 	dsi_display_ulps_enable(dsi);
+}
+
+static void dsi_enable_video_outputs(struct omap_dss_device *dssdev)
+{
+	struct dsi_data *dsi = to_dsi_data(dssdev);
+	int i;
+
+	dsi_bus_lock(dsi);
+
+	dsi_display_enable(dssdev);
+
+	for (i = 0; i < 3; i++) {
+		if (!dsi->vc[i].dest)
+			continue;
+		dsi_enable_video_output(dssdev, i);
+	}
+
+	dsi->video_enabled = true;
+
+	dsi_set_ulps_auto(dsi, true);
+
 	dsi_bus_unlock(dsi);
 }
 
@@ -4193,11 +4248,11 @@  static void dsi_display_disable(struct omap_dss_device *dssdev)
 {
 	struct dsi_data *dsi = to_dsi_data(dssdev);
 
+	WARN_ON(!dsi_bus_is_locked(dsi));
+
 	DSSDBG("dsi_display_disable\n");
 
-	dsi_bus_lock(dsi);
 	dsi_display_ulps_disable(dsi, true, false);
-	dsi_bus_unlock(dsi);
 }
 
 static int dsi_enable_te(struct dsi_data *dsi, bool enable)
@@ -4735,14 +4790,18 @@  static bool dsi_is_video_mode(struct omap_dss_device *dssdev)
 }
 
 static int dsi_set_config(struct omap_dss_device *dssdev,
-		const struct omap_dss_dsi_config *config)
+		const struct drm_display_mode *mode)
 {
 	struct dsi_data *dsi = to_dsi_data(dssdev);
 	struct dsi_clk_calc_ctx ctx;
-	struct omap_dss_dsi_config cfg = *config;
+	struct videomode vm;
+	struct omap_dss_dsi_config cfg = dsi->config;
 	bool ok;
 	int r;
 
+	drm_display_mode_to_videomode(mode, &vm);
+	cfg.vm = &vm;
+
 	mutex_lock(&dsi->lock);
 
 	cfg.mode = dsi->mode;
@@ -4906,9 +4965,15 @@  static ssize_t omap_dsi_host_transfer(struct mipi_dsi_host *host,
 	int r;
 
 	dsi_bus_lock(dsi);
-	dsi_set_ulps_auto(dsi, false);
-	r = _omap_dsi_host_transfer(dsi, msg);
-	dsi_set_ulps_auto(dsi, true);
+
+	if (dsi->video_enabled) {
+		dsi_set_ulps_auto(dsi, false);
+		r = _omap_dsi_host_transfer(dsi, msg);
+		dsi_set_ulps_auto(dsi, true);
+	} else {
+		r = -EIO;
+	}
+
 	dsi_bus_unlock(dsi);
 
 	return r;
@@ -4929,6 +4994,23 @@  static int dsi_get_clocks(struct dsi_data *dsi)
 	return 0;
 }
 
+static void dsi_set_timings(struct omap_dss_device *dssdev,
+			    const struct drm_display_mode *mode)
+{
+	DSSDBG("dsi_set_timings\n");
+	dsi_set_config(dssdev, mode);
+}
+
+static int dsi_check_timings(struct omap_dss_device *dssdev,
+			     struct drm_display_mode *mode)
+{
+	DSSDBG("dsi_check_timings\n");
+
+	/* TODO */
+
+	return 0;
+}
+
 static int dsi_connect(struct omap_dss_device *src,
 		       struct omap_dss_device *dst)
 {
@@ -4944,15 +5026,13 @@  static void dsi_disconnect(struct omap_dss_device *src,
 static const struct omap_dss_device_ops dsi_ops = {
 	.connect = dsi_connect,
 	.disconnect = dsi_disconnect,
-	.enable = dsi_display_enable,
-	.disable = dsi_display_disable,
-
-	.dsi = {
-		.set_config = dsi_set_config,
+	.enable = dsi_enable_video_outputs,
+	.disable = dsi_disable_video_outputs,
 
-		.enable_video_output = dsi_enable_video_output,
-		.disable_video_output = dsi_disable_video_output,
+	.check_timings = dsi_check_timings,
+	.set_timings = dsi_set_timings,
 
+	.dsi = {
 		.update = dsi_update_all,
 		.is_video_mode = dsi_is_video_mode,
 	},
@@ -5040,6 +5120,7 @@  static int omap_dsi_host_attach(struct mipi_dsi_host *host,
 {
 	struct dsi_data *dsi = host_to_omap(host);
 	unsigned int channel = client->channel;
+	struct drm_panel *panel;
 	int r;
 
 	if (channel > 3)
@@ -5057,6 +5138,10 @@  static int omap_dsi_host_attach(struct mipi_dsi_host *host,
 
 	dsi_bus_lock(dsi);
 
+	panel = of_drm_find_panel(client->dev.of_node);
+	if (IS_ERR(panel))
+		return PTR_ERR(panel);
+
 	atomic_set(&dsi->do_ext_te_update, 0);
 
 	if (client->mode_flags & MIPI_DSI_MODE_VIDEO) {
@@ -5077,8 +5162,12 @@  static int omap_dsi_host_attach(struct mipi_dsi_host *host,
 	INIT_DEFERRABLE_WORK(&dsi->ulps_work,
 			     omap_dsi_ulps_work_callback);
 
+	dsi->config.hs_clk_min = 150000000; // TODO: get from client?
+	dsi->config.hs_clk_max = client->hs_rate;
+	dsi->config.lp_clk_min = 7000000; // TODO: get from client?
+	dsi->config.lp_clk_max = client->lp_rate;
+
 	dsi->ulps_auto_idle = !!(client->mode_flags & MIPI_DSI_MODE_ULPS_IDLE);
-	dsi_set_ulps_auto(dsi, true);
 
 	dsi_bus_unlock(dsi);
 	return 0;
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 72a7da7bfff1..18560ca4bbb0 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -174,7 +174,6 @@  static const struct of_device_id omapdss_of_match[] __initconst = {
 };
 
 static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
-	{ .compatible = "panel-dsi-cm" },
 	{},
 };
 
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 4200611525d5..3ee3063b6a2d 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -278,14 +278,6 @@  struct omap_dss_writeback_info {
 struct omapdss_dsi_ops {
 	int (*update)(struct omap_dss_device *dssdev);
 	bool (*is_video_mode)(struct omap_dss_device *dssdev);
-
-	/* legacy API used by omapdss panels */
-	int (*set_config)(struct omap_dss_device *dssdev,
-			const struct omap_dss_dsi_config *cfg);
-
-	int (*enable_video_output)(struct omap_dss_device *dssdev, int channel);
-	void (*disable_video_output)(struct omap_dss_device *dssdev,
-			int channel);
 };
 
 struct omap_dss_device_ops {