From patchwork Sat Nov 14 08:46:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 11905497 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C523D17F7 for ; Sat, 14 Nov 2020 08:47:00 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id AA55422265 for ; Sat, 14 Nov 2020 08:47:00 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="N2JwHMrP" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726736AbgKNIqp (ORCPT ); Sat, 14 Nov 2020 03:46:45 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60148 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726735AbgKNIqo (ORCPT ); Sat, 14 Nov 2020 03:46:44 -0500 Received: from mail-lf1-x134.google.com (mail-lf1-x134.google.com [IPv6:2a00:1450:4864:20::134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E35E9C061A4A for ; Sat, 14 Nov 2020 00:46:42 -0800 (PST) Received: by mail-lf1-x134.google.com with SMTP id d17so17652906lfq.10 for ; Sat, 14 Nov 2020 00:46:42 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=a/nSWEsw3N6fSKKLuz4XMLcWzgg3KLh595YgOxVRdOs=; b=N2JwHMrPfSCZtpY3q2xbT+ib5L1HzYHliqPlmcYp9QsD2VBTyZKlDdbpGuiOFoJd1s 52+L9WETgaAeMww0c5i8OTnbug++dQoSJ0h7+K+lDnRpglJY3CEsa8su/PqZr0U1lKQg r5HAu3k15jf4yz3c+LI71v1m2P/mpF51p8O2ha8LsW/FM4q0Kj3gB3yLEjuUU22rhv7k nN5dl3awHgK8joTyqs975AkNlM1P0mZe8C+Hp9+azEMoonWwf2UHgxDo2IJ9dbo/z6LK IqMLpuPKn6xVz1/e1Q2og6dDca8UOCwyr22MKH2TxlEZLvf0sbZSqgBhr0amgtdkB3mi jhBQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=a/nSWEsw3N6fSKKLuz4XMLcWzgg3KLh595YgOxVRdOs=; b=gYMnVgLpw9tYL8C0bVUggnl+tx2t8YlcGtjWajp5LCiezZ1l0zd3zavsg4dyOTfjkG KRpgb6gpDUg7QP8uGu4viTofAtykz3E2p94PG3M5IByPihkqxXjqzJDckkIkEp1dV9qg wBOVjpC6ju7mK8d8iqsHn+wO+jaRfR91tx+yPuOoQKgqhDZKN37RAGBSEjfeHt7mQBEp oMqKpA/kvst5yvKIofhKln/qKKPuubra5C4lKITlqSNXV3xw9tdJPDcRZG3B+JpwyV5U 0cGvvk1Di1jHZf4a55SHVaq3QVVNEpVn3Zxbc+lOVZwpD0WcOfW4yGLE3oOtkOGUNis/ 8lAQ== X-Gm-Message-State: AOAM5321vEKSbtD2tj8zGJU/g7desRfBZvuwCUlA0/fU3j8g1dR9MPTI VZg5uFfR41IqLNmdnXG9moIupQ== X-Google-Smtp-Source: ABdhPJydz8kP6av8ZiAuObPfCUcyTmQd+SirxJXI3YER6a5DTo1JgeQT9UyQvyt+lPNEc3iKShgWIA== X-Received: by 2002:a05:6512:368a:: with SMTP id d10mr2224684lfs.579.1605343601373; Sat, 14 Nov 2020 00:46:41 -0800 (PST) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id f62sm1870081lfd.144.2020.11.14.00.46.40 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Sat, 14 Nov 2020 00:46:40 -0800 (PST) From: Grzegorz Jaszczyk To: ohad@wizery.com, bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, linux-remoteproc@vger.kernel.org, robh+dt@kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, praneeth@ti.com, rogerq@ti.com Subject: [PATCH 4/6] remoteproc/pru: Add pru-specific debugfs support Date: Sat, 14 Nov 2020 09:46:11 +0100 Message-Id: <20201114084613.13503-5-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.29.0 In-Reply-To: <20201114084613.13503-1-grzegorz.jaszczyk@linaro.org> References: <20201114084613.13503-1-grzegorz.jaszczyk@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Suman Anna The remoteproc core creates certain standard debugfs entries, that does not give a whole lot of useful information for the PRUs. The PRU remoteproc driver is enhanced to add additional debugfs entries for PRU. These will be auto-cleaned up when the parent rproc debug directory is removed. The enhanced debugfs support adds two new entries: 'regs' and 'single_step'. The 'regs' dumps out the useful CTRL sub-module registers as well as each of the 32 GPREGs and CT_REGs registers. The GPREGs and CT_REGs though are printed only when the PRU is halted and accessible as per the IP design. The 'single_step' utilizes the single-step execution of the PRU cores. Writing a non-zero value performs a single step, and a zero value restores the PRU to execute in the same mode as the mode before the first single step. (note: if the PRU is halted because of a halt instruction, then no change occurs). Logic for setting the PC and jumping over a halt instruction shall be added in the future. Signed-off-by: Suman Anna Signed-off-by: Grzegorz Jaszczyk --- drivers/remoteproc/pru_rproc.c | 137 +++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c index 825e9c7e081b..33806ddcbd5d 100644 --- a/drivers/remoteproc/pru_rproc.c +++ b/drivers/remoteproc/pru_rproc.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -25,6 +26,13 @@ /* PRU_ICSS_PRU_CTRL registers */ #define PRU_CTRL_CTRL 0x0000 #define PRU_CTRL_STS 0x0004 +#define PRU_CTRL_WAKEUP_EN 0x0008 +#define PRU_CTRL_CYCLE 0x000C +#define PRU_CTRL_STALL 0x0010 +#define PRU_CTRL_CTBIR0 0x0020 +#define PRU_CTRL_CTBIR1 0x0024 +#define PRU_CTRL_CTPPR0 0x0028 +#define PRU_CTRL_CTPPR1 0x002C /* CTRL register bit-fields */ #define CTRL_CTRL_SOFT_RST_N BIT(0) @@ -34,6 +42,10 @@ #define CTRL_CTRL_SINGLE_STEP BIT(8) #define CTRL_CTRL_RUNSTATE BIT(15) +/* PRU_ICSS_PRU_DEBUG registers */ +#define PRU_DEBUG_GPREG(x) (0x0000 + (x) * 4) +#define PRU_DEBUG_CT_REG(x) (0x0080 + (x) * 4) + /* PRU Core IRAM address masks */ #define PRU0_IRAM_ADDR_MASK 0x34000 #define PRU1_IRAM_ADDR_MASK 0x38000 @@ -73,6 +85,8 @@ enum pru_iomem { * @pru_interrupt_map: pointer to interrupt mapping description (firmware) * @pru_interrupt_map_sz: pru_interrupt_map size * @evt_count: number of mapped events + * @dbg_single_step: debug state variable to set PRU into single step mode + * @dbg_continuous: debug state variable to restore PRU execution mode */ struct pru_rproc { int id; @@ -85,6 +99,8 @@ struct pru_rproc { struct pru_irq_rsc *pru_interrupt_map; size_t pru_interrupt_map_sz; ssize_t evt_count; + u32 dbg_single_step; + u32 dbg_continuous; }; static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg) @@ -98,6 +114,125 @@ void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val) writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg); } +static inline u32 pru_debug_read_reg(struct pru_rproc *pru, unsigned int reg) +{ + return readl_relaxed(pru->mem_regions[PRU_IOMEM_DEBUG].va + reg); +} + +static int regs_show(struct seq_file *s, void *data) +{ + struct rproc *rproc = s->private; + struct pru_rproc *pru = rproc->priv; + int i, nregs = 32; + u32 pru_sts; + int pru_is_running; + + seq_puts(s, "============== Control Registers ==============\n"); + seq_printf(s, "CTRL := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTRL)); + pru_sts = pru_control_read_reg(pru, PRU_CTRL_STS); + seq_printf(s, "STS (PC) := 0x%08x (0x%08x)\n", pru_sts, pru_sts << 2); + seq_printf(s, "WAKEUP_EN := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_WAKEUP_EN)); + seq_printf(s, "CYCLE := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CYCLE)); + seq_printf(s, "STALL := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_STALL)); + seq_printf(s, "CTBIR0 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTBIR0)); + seq_printf(s, "CTBIR1 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTBIR1)); + seq_printf(s, "CTPPR0 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTPPR0)); + seq_printf(s, "CTPPR1 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTPPR1)); + + seq_puts(s, "=============== Debug Registers ===============\n"); + pru_is_running = pru_control_read_reg(pru, PRU_CTRL_CTRL) & + CTRL_CTRL_RUNSTATE; + if (pru_is_running) { + seq_puts(s, "PRU is executing, cannot print/access debug registers.\n"); + return 0; + } + + for (i = 0; i < nregs; i++) { + seq_printf(s, "GPREG%-2d := 0x%08x\tCT_REG%-2d := 0x%08x\n", + i, pru_debug_read_reg(pru, PRU_DEBUG_GPREG(i)), + i, pru_debug_read_reg(pru, PRU_DEBUG_CT_REG(i))); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(regs); + +/* + * Control PRU single-step mode + * + * This is a debug helper function used for controlling the single-step + * mode of the PRU. The PRU Debug registers are not accessible when the + * PRU is in RUNNING state. + * + * Writing a non-zero value sets the PRU into single-step mode irrespective + * of its previous state. The PRU mode is saved only on the first set into + * a single-step mode. Writing a zero value will restore the PRU into its + * original mode. + */ +static int pru_rproc_debug_ss_set(void *data, u64 val) +{ + struct rproc *rproc = data; + struct pru_rproc *pru = rproc->priv; + u32 reg_val; + + val = val ? 1 : 0; + if (!val && !pru->dbg_single_step) + return 0; + + reg_val = pru_control_read_reg(pru, PRU_CTRL_CTRL); + + if (val && !pru->dbg_single_step) + pru->dbg_continuous = reg_val; + + if (val) + reg_val |= CTRL_CTRL_SINGLE_STEP | CTRL_CTRL_EN; + else + reg_val = pru->dbg_continuous; + + pru->dbg_single_step = val; + pru_control_write_reg(pru, PRU_CTRL_CTRL, reg_val); + + return 0; +} + +static int pru_rproc_debug_ss_get(void *data, u64 *val) +{ + struct rproc *rproc = data; + struct pru_rproc *pru = rproc->priv; + + *val = pru->dbg_single_step; + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(pru_rproc_debug_ss_fops, pru_rproc_debug_ss_get, + pru_rproc_debug_ss_set, "%llu\n"); + +/* + * Create PRU-specific debugfs entries + * + * The entries are created only if the parent remoteproc debugfs directory + * exists, and will be cleaned up by the remoteproc core. + */ +static void pru_rproc_create_debug_entries(struct rproc *rproc) +{ + if (!rproc->dbg_dir) + return; + + debugfs_create_file("regs", 0400, rproc->dbg_dir, + rproc, ®s_fops); + debugfs_create_file("single_step", 0600, rproc->dbg_dir, + rproc, &pru_rproc_debug_ss_fops); +} + static void pru_dispose_irq_mapping(struct pru_rproc *pru) { while (--pru->evt_count >= 0) { @@ -575,6 +710,8 @@ static int pru_rproc_probe(struct platform_device *pdev) return ret; } + pru_rproc_create_debug_entries(rproc); + dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np); return 0;