| Message ID | 20210110190529.46135-3-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Lost key-up interrupt handling for omap4-keypad | expand |
Hi Tony, On Sun, Jan 10, 2021 at 09:05:26PM +0200, Tony Lindgren wrote: > Because of errata i689 the keyboard can idle with state where no key > up interrupts are seen until after the next key press. > > This means we need to first check for any lost key up events before > scanning for new down events. > > For example, rapidly pressing shift-shift-j can sometimes produce a J > instead of j. Let's fix the issue by scanning the keyboard in two > phases. First we scan for any key up events that we may have missed, > and then we scan for key down events. > > Let's also simplify things with for_each_set_bit() as suggested by > Dmitry Torokhov <dmitry.torokhov@gmail.com>. > > Cc: Arthur Demchenkov <spinal.by@gmail.com> > Cc: Carl Philipp Klemm <philipp@uvos.xyz> > Cc: Merlijn Wajer <merlijn@wizzup.org> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: ruleh <ruleh@gmx.de> > Cc: Sebastian Reichel <sre@kernel.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > drivers/input/keyboard/omap4-keypad.c | 69 ++++++++++++++++++--------- > 1 file changed, 46 insertions(+), 23 deletions(-) > > diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c > --- a/drivers/input/keyboard/omap4-keypad.c > +++ b/drivers/input/keyboard/omap4-keypad.c > @@ -78,7 +78,7 @@ struct omap4_keypad { > u32 irqreg_offset; > unsigned int row_shift; > bool no_autorepeat; > - unsigned char key_state[8]; > + u64 keys; > unsigned short *keymap; > }; > > @@ -107,6 +107,41 @@ static void kbd_write_irqreg(struct omap4_keypad *keypad_data, > keypad_data->base + keypad_data->irqreg_offset + offset); > } > > +static int omap4_keypad_scan_state(struct omap4_keypad *keypad_data, u64 keys, > + bool down) > +{ > + struct input_dev *input_dev = keypad_data->input; > + unsigned int col, row, code; > + DECLARE_BITMAP(mask, 64); > + unsigned long bit; > + int events = 0; > + bool key_down; > + u64 changed; > + > + changed = keys ^ keypad_data->keys; > + bitmap_from_u64(mask, changed); > + > + for_each_set_bit(bit, mask, keypad_data->rows * BITS_PER_BYTE) { > + row = bit / BITS_PER_BYTE; > + col = bit % BITS_PER_BYTE; > + code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift); > + > + if (BIT_ULL(bit) & keys) > + key_down = true; > + else > + key_down = false; > + > + if (key_down != down) > + continue; > + > + input_event(input_dev, EV_MSC, MSC_SCAN, code); > + input_report_key(input_dev, keypad_data->keymap[code], > + key_down); > + events++; > + } > + > + return events; > +} > > /* Interrupt handlers */ > static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id) > @@ -123,34 +158,22 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) > { > struct omap4_keypad *keypad_data = dev_id; > struct input_dev *input_dev = keypad_data->input; > - unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)]; > - unsigned int col, row, code, changed; > - u32 *new_state = (u32 *) key_state; > + u32 low, high; > + u64 keys; > > - *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); > - *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); > + low = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); > + high = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); > + keys = low | (u64)high << 32; > > - for (row = 0; row < keypad_data->rows; row++) { > - changed = key_state[row] ^ keypad_data->key_state[row]; > - if (!changed) > - continue; > + /* Scan for key up events for lost key-up interrupts */ > + omap4_keypad_scan_state(keypad_data, keys, false); > > - for (col = 0; col < keypad_data->cols; col++) { > - if (changed & (1 << col)) { > - code = MATRIX_SCAN_CODE(row, col, > - keypad_data->row_shift); > - input_event(input_dev, EV_MSC, MSC_SCAN, code); > - input_report_key(input_dev, > - keypad_data->keymap[code], > - key_state[row] & (1 << col)); > - } > - } > - } > + /* Scan for key down events */ > + omap4_keypad_scan_state(keypad_data, keys, true); > > input_sync(input_dev); Technically speaking, userspace is free to accumulate the events until it receives EV_SYN/SYN_REPORT event and process the events in the event packet in order it sees fit. So to achieve what you want, I think we should issue 2 input_sync()s, one for the release block, and another is for press. I think we can also simplify the code if we pass into the new scan function exact set of keys that are being released or pressed. How about the version below? Thanks!
* Dmitry Torokhov <dmitry.torokhov@gmail.com> [210111 04:48]: > Technically speaking, userspace is free to accumulate the events until > it receives EV_SYN/SYN_REPORT event and process the events in the event > packet in order it sees fit. So to achieve what you want, I think we > should issue 2 input_sync()s, one for the release block, and another is > for press. I think we can also simplify the code if we pass into the new > scan function exact set of keys that are being released or pressed. > > How about the version below? Yes that works nicely. Thanks, Tony > > Input: omap4-keypad - scan keys in two phases and simplify with bitmask > > From: Tony Lindgren <tony@atomide.com> > > Because of errata i689 the keyboard can idle with state where no key > up interrupts are seen until after the next key press. > > This means we need to first check for any lost key up events before > scanning for new down events. > > For example, rapidly pressing shift-shift-j can sometimes produce a J > instead of j. Let's fix the issue by scanning the keyboard in two > phases. First we scan for any key up events that we may have missed, > and then we scan for key down events. > > Let's also simplify things with for_each_set_bit() as suggested by > Dmitry Torokhov <dmitry.torokhov@gmail.com>. > > Signed-off-by: Tony Lindgren <tony@atomide.com> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > drivers/input/keyboard/omap4-keypad.c | 73 ++++++++++++++++++++------------- > 1 file changed, 45 insertions(+), 28 deletions(-) > > diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c > index ab761aa66b6d..6dcf27af856d 100644 > --- a/drivers/input/keyboard/omap4-keypad.c > +++ b/drivers/input/keyboard/omap4-keypad.c > @@ -78,7 +78,7 @@ struct omap4_keypad { > u32 irqreg_offset; > unsigned int row_shift; > bool no_autorepeat; > - unsigned char key_state[8]; > + u64 keys; > unsigned short *keymap; > }; > > @@ -107,6 +107,33 @@ static void kbd_write_irqreg(struct omap4_keypad *keypad_data, > keypad_data->base + keypad_data->irqreg_offset + offset); > } > > +static int omap4_keypad_report_keys(struct omap4_keypad *keypad_data, > + u64 keys, bool down) > +{ > + struct input_dev *input_dev = keypad_data->input; > + unsigned int col, row, code; > + DECLARE_BITMAP(mask, 64); > + unsigned long bit; > + int events = 0; > + > + bitmap_from_u64(mask, keys); > + > + for_each_set_bit(bit, mask, keypad_data->rows * BITS_PER_BYTE) { > + row = bit / BITS_PER_BYTE; > + col = bit % BITS_PER_BYTE; > + code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift); > + > + input_event(input_dev, EV_MSC, MSC_SCAN, code); > + input_report_key(input_dev, keypad_data->keymap[code], down); > + > + events++; > + } > + > + if (events) > + input_sync(input_dev); > + > + return events; > +} > > /* Interrupt handlers */ > static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id) > @@ -122,35 +149,25 @@ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id) > static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) > { > struct omap4_keypad *keypad_data = dev_id; > - struct input_dev *input_dev = keypad_data->input; > - unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)]; > - unsigned int col, row, code, changed; > - u32 *new_state = (u32 *) key_state; > - > - *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); > - *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); > - > - for (row = 0; row < keypad_data->rows; row++) { > - changed = key_state[row] ^ keypad_data->key_state[row]; > - if (!changed) > - continue; > - > - for (col = 0; col < keypad_data->cols; col++) { > - if (changed & (1 << col)) { > - code = MATRIX_SCAN_CODE(row, col, > - keypad_data->row_shift); > - input_event(input_dev, EV_MSC, MSC_SCAN, code); > - input_report_key(input_dev, > - keypad_data->keymap[code], > - key_state[row] & (1 << col)); > - } > - } > - } > + u32 low, high; > + u64 keys, changed; > + > + low = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); > + high = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); > + keys = low | (u64)high << 32; > + > + changed = keys ^ keypad_data->keys; > + > + /* > + * Report key up events separately and first. This matters in case we > + * lost key-up interrupt and just now catching up. > + */ > + omap4_keypad_report_keys(keypad_data, changed & ~keys, false); > > - input_sync(input_dev); > + /* Report key down events */ > + omap4_keypad_report_keys(keypad_data, changed & keys, true); > > - memcpy(keypad_data->key_state, key_state, > - sizeof(keypad_data->key_state)); > + keypad_data->keys = keys; > > /* clear pending interrupts */ > kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
On Mon, Jan 11, 2021 at 07:56:54AM +0200, Tony Lindgren wrote: > * Dmitry Torokhov <dmitry.torokhov@gmail.com> [210111 04:48]: > > Technically speaking, userspace is free to accumulate the events until > > it receives EV_SYN/SYN_REPORT event and process the events in the event > > packet in order it sees fit. So to achieve what you want, I think we > > should issue 2 input_sync()s, one for the release block, and another is > > for press. I think we can also simplify the code if we pass into the new > > scan function exact set of keys that are being released or pressed. > > > > How about the version below? > > Yes that works nicely. Excellent, applied, thank you.
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -78,7 +78,7 @@ struct omap4_keypad { u32 irqreg_offset; unsigned int row_shift; bool no_autorepeat; - unsigned char key_state[8]; + u64 keys; unsigned short *keymap; }; @@ -107,6 +107,41 @@ static void kbd_write_irqreg(struct omap4_keypad *keypad_data, keypad_data->base + keypad_data->irqreg_offset + offset); } +static int omap4_keypad_scan_state(struct omap4_keypad *keypad_data, u64 keys, + bool down) +{ + struct input_dev *input_dev = keypad_data->input; + unsigned int col, row, code; + DECLARE_BITMAP(mask, 64); + unsigned long bit; + int events = 0; + bool key_down; + u64 changed; + + changed = keys ^ keypad_data->keys; + bitmap_from_u64(mask, changed); + + for_each_set_bit(bit, mask, keypad_data->rows * BITS_PER_BYTE) { + row = bit / BITS_PER_BYTE; + col = bit % BITS_PER_BYTE; + code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift); + + if (BIT_ULL(bit) & keys) + key_down = true; + else + key_down = false; + + if (key_down != down) + continue; + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad_data->keymap[code], + key_down); + events++; + } + + return events; +} /* Interrupt handlers */ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id) @@ -123,34 +158,22 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) { struct omap4_keypad *keypad_data = dev_id; struct input_dev *input_dev = keypad_data->input; - unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)]; - unsigned int col, row, code, changed; - u32 *new_state = (u32 *) key_state; + u32 low, high; + u64 keys; - *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); - *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); + low = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); + high = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); + keys = low | (u64)high << 32; - for (row = 0; row < keypad_data->rows; row++) { - changed = key_state[row] ^ keypad_data->key_state[row]; - if (!changed) - continue; + /* Scan for key up events for lost key-up interrupts */ + omap4_keypad_scan_state(keypad_data, keys, false); - for (col = 0; col < keypad_data->cols; col++) { - if (changed & (1 << col)) { - code = MATRIX_SCAN_CODE(row, col, - keypad_data->row_shift); - input_event(input_dev, EV_MSC, MSC_SCAN, code); - input_report_key(input_dev, - keypad_data->keymap[code], - key_state[row] & (1 << col)); - } - } - } + /* Scan for key down events */ + omap4_keypad_scan_state(keypad_data, keys, true); input_sync(input_dev); - memcpy(keypad_data->key_state, key_state, - sizeof(keypad_data->key_state)); + keypad_data->keys = keys; /* clear pending interrupts */ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
Because of errata i689 the keyboard can idle with state where no key up interrupts are seen until after the next key press. This means we need to first check for any lost key up events before scanning for new down events. For example, rapidly pressing shift-shift-j can sometimes produce a J instead of j. Let's fix the issue by scanning the keyboard in two phases. First we scan for any key up events that we may have missed, and then we scan for key down events. Let's also simplify things with for_each_set_bit() as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. Cc: Arthur Demchenkov <spinal.by@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: ruleh <ruleh@gmx.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/input/keyboard/omap4-keypad.c | 69 ++++++++++++++++++--------- 1 file changed, 46 insertions(+), 23 deletions(-)