@@ -266,28 +266,50 @@ dmm@0 {
};
};
- emif1: emif@4c000000 {
- compatible = "ti,emif-4d5";
- ti,hwmods = "emif1";
- ti,no-idle-on-init;
- phy-type = <2>; /* DDR PHY type: Intelli PHY */
- reg = <0x4c000000 0x400>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ ti,hwmods = "emif1";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif1: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
- emif2: emif@4d000000 {
- compatible = "ti,emif-4d5";
- ti,hwmods = "emif2";
- ti,no-idle-on-init;
- phy-type = <2>; /* DDR PHY type: Intelli PHY */
- reg = <0x4d000000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4d000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ ti,hwmods = "emif2";
+ reg = <0x4d000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000000 0x1000000>;
+
+ emif2: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
aes1_target: target-module@4b501000 {
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" property to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap5.dtsi | 62 ++++++++++++++++++++++++------------ 1 file changed, 42 insertions(+), 20 deletions(-)