diff mbox series

[06/11] ARM: dts: Move omap5 mmio-sram out of l3 interconnect

Message ID 20210308151143.27793-7-tony@atomide.com (mailing list archive)
State New, archived
Headers show
Series Update omap5 dts files to probe with genpd | expand

Commit Message

Tony Lindgren March 8, 2021, 3:11 p.m. UTC 
We need mmio-sram early for omap4_sram_init() for IO barrier init, and
will be moving l3 interconnect to probe with simple-pm-bus that probes
at module_init() time. So let's move mmio-sram out of l3 to prepare for
that.

Otherwise we will get the following after probing the interconnects with
simple-pm-bus:

omap4_sram_init:Unable to get sram pool needed to handle errata I688

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5.dtsi | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -106,6 +106,15 @@  pmu {
 			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	/*
+	 * Needed early by omap4_sram_init() for barrier, do not move to l3
+	 * interconnect as simple-pm-bus probes at module_init() time.
+	 */
+	ocmcram: sram@40300000 {
+		compatible = "mmio-sram";
+		reg = <0 0x40300000 0 0x20000>; /* 128k */
+	};
+
 	gic: interrupt-controller@48211000 {
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -172,11 +181,6 @@  mpu {
 		l4_abe: interconnect@40100000 {
 		};
 
-		ocmcram: sram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x20000>; /* 128k */
-		};
-
 		target-module@50000000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x50000000 4>,