diff mbox series

ARM: dts: omap2/3: Drop dmas property from I2C node

Message ID 20210526094424.27234-1-vigneshr@ti.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: omap2/3: Drop dmas property from I2C node | expand

Commit Message

Vignesh Raghavendra May 26, 2021, 9:44 a.m. UTC
DMA was never supported by i2c-omap driver and the bindings were never
documented. Therefore drop the entries in preparation to moving
bindings to YAML schema.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm/boot/dts/dm816x.dtsi | 4 ----
 arch/arm/boot/dts/omap2.dtsi  | 4 ----
 arch/arm/boot/dts/omap3.dtsi  | 6 ------
 3 files changed, 14 deletions(-)

Comments

Grygorii Strashko May 26, 2021, 10:08 a.m. UTC | #1
On 26/05/2021 12:44, Vignesh Raghavendra wrote:
> DMA was never supported by i2c-omap driver and the bindings were never
> documented. Therefore drop the entries in preparation to moving
> bindings to YAML schema.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>   arch/arm/boot/dts/dm816x.dtsi | 4 ----
>   arch/arm/boot/dts/omap2.dtsi  | 4 ----
>   arch/arm/boot/dts/omap3.dtsi  | 6 ------
>   3 files changed, 14 deletions(-)

Thank you.
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tony Lindgren June 11, 2021, 7:17 a.m. UTC | #2
* Grygorii Strashko <grygorii.strashko@ti.com> [210526 10:08]:
> 
> 
> On 26/05/2021 12:44, Vignesh Raghavendra wrote:
> > DMA was never supported by i2c-omap driver and the bindings were never
> > documented. Therefore drop the entries in preparation to moving
> > bindings to YAML schema.
> > 
> > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> > ---
> >   arch/arm/boot/dts/dm816x.dtsi | 4 ----
> >   arch/arm/boot/dts/omap2.dtsi  | 4 ----
> >   arch/arm/boot/dts/omap3.dtsi  | 6 ------
> >   3 files changed, 14 deletions(-)
> 
> Thank you.
> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>

Applying into omap-for-v5.14/dt thanks.

Regards,

Tony
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..2d3d6906b3fb 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -314,8 +314,6 @@  i2c1: i2c@48028000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <70>;
-			dmas = <&edma 58 0 &edma 59 0>;
-			dma-names = "tx", "rx";
 		};
 
 		i2c2: i2c@4802a000 {
@@ -325,8 +323,6 @@  i2c2: i2c@4802a000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <71>;
-			dmas = <&edma 60 0 &edma 61 0>;
-			dma-names = "tx", "rx";
 		};
 
 		intc: interrupt-controller@48200000 {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f9c2a9938898..5750ca1233cc 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -120,8 +120,6 @@  i2c1: i2c@48070000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
 		};
 
 		i2c2: i2c@48072000 {
@@ -131,8 +129,6 @@  i2c2: i2c@48072000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
 		};
 
 		mcspi1: spi@48098000 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index c5b9da0d7e6c..eeee6c95a42e 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -403,8 +403,6 @@  i2c1: i2c@48070000 {
 			compatible = "ti,omap3-i2c";
 			reg = <0x48070000 0x80>;
 			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -414,8 +412,6 @@  i2c2: i2c@48072000 {
 			compatible = "ti,omap3-i2c";
 			reg = <0x48072000 0x80>;
 			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -425,8 +421,6 @@  i2c3: i2c@48060000 {
 			compatible = "ti,omap3-i2c";
 			reg = <0x48060000 0x80>;
 			interrupts = <61>;
-			dmas = <&sdma 25 &sdma 26>;
-			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";