diff mbox series

[1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes

Message ID 20210526115956.3065-1-vigneshr@ti.com (mailing list archive)
State New, archived
Headers show
Series [1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes | expand

Commit Message

Vignesh Raghavendra May 26, 2021, 11:59 a.m. UTC 
ti,omap4-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm/boot/dts/dra7-l4.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Comments

Tony Lindgren May 27, 2021, 12:10 p.m. UTC | #1 
* Vignesh Raghavendra <vigneshr@ti.com> [210526 15:00]:
> ti,omap4-uart was kept around to work with legacy omap-serial driver.
> Now that we have completed move to 8250-omap.c drop legacy compatible.
> This will simplify writing YAML schema.

Applying both into omap-for-v5.14/dt thanks.

Tony
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 149144cdff35..a750f7829f79 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1159,7 +1159,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x20000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1562,7 +1562,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x66000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1594,7 +1594,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x68000 0x1000>;
 
 			uart6: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1626,7 +1626,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x6a000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1658,7 +1658,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x6c000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1690,7 +1690,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x6e000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2424,7 +2424,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x20000 0x1000>;
 
 			uart7: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2454,7 +2454,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart8: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2484,7 +2484,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart9: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -4530,7 +4530,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0xb000 0x1000>;
 
 			uart10: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;