@@ -102,6 +102,16 @@ pru1_1: pru@38000 {
reg-names = "iram", "control", "debug";
firmware-name = "am57xx-pru1_1-fw";
};
+
+ pruss1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&dpll_gmac_h13x2_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ reg = <0x32400 0x90>;
+ };
};
};
@@ -201,6 +211,16 @@ pru2_1: pru@38000 {
reg-names = "iram", "control", "debug";
firmware-name = "am57xx-pru2_1-fw";
};
+
+ pruss2_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&dpll_gmac_h13x2_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ reg = <0x32400 0x90>;
+ };
};
};
};
@@ -208,3 +208,11 @@ &mmc2 {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
@@ -27,3 +27,11 @@ &mmc2 {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
@@ -43,3 +43,11 @@ &m_can0 {
&emif1 {
status = "okay";
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
@@ -637,3 +637,11 @@ &dsp2 {
status = "okay";
memory-region = <&dsp2_memory_region>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
@@ -618,3 +618,11 @@ &gpio2_target {
status = "okay";
ti,no-reset-on-init;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};