| Message ID | 20210806085907.14615-1-paul.barker@sancloud.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs | expand |
* Paul Barker <paul.barker@sancloud.com> [210806 11:59]: > pinctrl settings for the USB hub, barometer & accelerometer need to be > referenced from the relevant nodes to work. Thanks applying both into omap-for-v5.15/dt. Tony
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi index 627c18d23f94..55952fe8687c 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi +++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi @@ -58,6 +58,8 @@ &cpsw_port1 { &i2c0 { usb2512b: usb-hub@2c { + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_ctrl>; compatible = "microchip,usb2512b"; reg = <0x2c>; reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts index 2a0ac9f5dda7..efbe93135dbe 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -32,6 +32,8 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_ &i2c0 { lps331ap: barometer@5c { + pinctrl-names = "default"; + pinctrl-0 = <&lps3331ap_pins>; compatible = "st,lps331ap-press"; st,drdy-int-pin = <1>; reg = <0x5c>; @@ -40,6 +42,8 @@ lps331ap: barometer@5c { }; mpu6050: accelerometer@68 { + pinctrl-names = "default"; + pinctrl-0 = <&mpu6050_pins>; compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&gpio0>;
pinctrl settings for the USB hub, barometer & accelerometer need to be referenced from the relevant nodes to work. Signed-off-by: Paul Barker <paul.barker@sancloud.com> --- arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi | 2 ++ arch/arm/boot/dts/am335x-sancloud-bbe.dts | 4 ++++ 2 files changed, 6 insertions(+)