diff mbox series

[v6,20/48] mfd: ti_am335x_tscadc: Always provide an idle configuration

Message ID 20211015081506.933180-21-miquel.raynal@bootlin.com (mailing list archive)
State New, archived
Headers show
Series TI AM437X ADC1 | expand

Commit Message

Miquel Raynal Oct. 15, 2021, 8:14 a.m. UTC 
The idle register is valid no matter if the touchscreen is used or not,
let's always configure it.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 67c30e4e8250..82cee764acc8 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -221,16 +221,16 @@  static	int ti_tscadc_probe(struct platform_device *pdev)
 	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
 
-	/* Set register bits for Idle Config Mode */
 	if (tsc_wires > 0) {
 		tscadc->tsc_wires = tsc_wires;
 		if (tsc_wires == 5)
 			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
 		else
 			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
-		tscadc_idle_config(tscadc);
 	}
 
+	tscadc_idle_config(tscadc);
+
 	/* Enable the TSC module enable bit */
 	ctrl |= CNTRLREG_TSCSSENB;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
@@ -321,8 +321,10 @@  static int __maybe_unused tscadc_resume(struct device *dev)
 			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
 		else
 			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
-		tscadc_idle_config(tscadc);
 	}
+
+	tscadc_idle_config(tscadc);
+
 	ctrl |= CNTRLREG_TSCSSENB;
 	regmap_write(tscadc->regmap, REG_CTRL, ctrl);