diff mbox series

[6/7] serial: 8250_omap: Drop the use of pm_runtime_irq_safe()

Message ID 20211115084203.56478-7-tony@atomide.com (mailing list archive)
State New, archived
Headers show
Series Serial port generic PM to fix 8250 PM | expand

Commit Message

Tony Lindgren Nov. 15, 2021, 8:42 a.m. UTC 
We can finally drop the pm_runtime_irq_safe() usage for 8250_omap driver.

We already have the serial layer RX wake path fixed for power management.
We no longer allow deeper idle states unless the kernel console has been
detached, and we require that the RX wakeirq is configured.

For TX path, we now use the prep_tx() and uart_flush_tx() calls.

To drop pm_runtime_irq_safe(), we remove all PM runtime calls from the
interrupt context. If we ever see an interrupt for an idled port, we just
bail out.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/tty/serial/8250/8250_omap.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

Comments

Johan Hovold Nov. 30, 2021, 10:42 a.m. UTC | #1 
On Mon, Nov 15, 2021 at 10:42:02AM +0200, Tony Lindgren wrote:
> We can finally drop the pm_runtime_irq_safe() usage for 8250_omap driver.
> 
> We already have the serial layer RX wake path fixed for power management.
> We no longer allow deeper idle states unless the kernel console has been
> detached, and we require that the RX wakeirq is configured.
> 
> For TX path, we now use the prep_tx() and uart_flush_tx() calls.

Looks like this commit message is outdated. These functions no longer
exist.

> To drop pm_runtime_irq_safe(), we remove all PM runtime calls from the
> interrupt context. If we ever see an interrupt for an idled port, we just
> bail out.
> 
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Johan
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -621,6 +621,9 @@  static irqreturn_t omap8250_irq(int irq, void *dev_id)
 	unsigned int iir, lsr;
 	int ret;
 
+	if (port->runtime_suspended)
+		return IRQ_NONE;
+
 #ifdef CONFIG_SERIAL_8250_DMA
 	if (up->dma) {
 		ret = omap_8250_dma_handle_irq(port);
@@ -628,7 +631,6 @@  static irqreturn_t omap8250_irq(int irq, void *dev_id)
 	}
 #endif
 
-	serial8250_rpm_get(up);
 	lsr = serial_port_in(port, UART_LSR);
 	iir = serial_port_in(port, UART_IIR);
 	ret = serial8250_handle_irq(port, iir);
@@ -662,8 +664,6 @@  static irqreturn_t omap8250_irq(int irq, void *dev_id)
 		schedule_delayed_work(&up->overrun_backoff, delay);
 	}
 
-	serial8250_rpm_put(up);
-
 	return IRQ_RETVAL(ret);
 }
 
@@ -1191,13 +1191,9 @@  static int omap_8250_dma_handle_irq(struct uart_port *port)
 	unsigned char status;
 	u8 iir;
 
-	serial8250_rpm_get(up);
-
 	iir = serial_port_in(port, UART_IIR);
-	if (iir & UART_IIR_NO_INT) {
-		serial8250_rpm_put(up);
+	if (iir & UART_IIR_NO_INT)
 		return IRQ_HANDLED;
-	}
 
 	spin_lock(&port->lock);
 
@@ -1226,7 +1222,6 @@  static int omap_8250_dma_handle_irq(struct uart_port *port)
 
 	uart_unlock_and_check_sysrq(port);
 
-	serial8250_rpm_put(up);
 	return 1;
 }
 
@@ -1420,8 +1415,6 @@  static int omap8250_probe(struct platform_device *pdev)
 	if (!of_get_available_child_count(pdev->dev.of_node))
 		pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
 
-	pm_runtime_irq_safe(&pdev->dev);
-
 	pm_runtime_get_sync(&pdev->dev);
 
 	omap_serial_fill_features_erratas(&up, priv);