@@ -170,13 +170,20 @@ usb_l4_ick: usb_l4_ick {
clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
};
- dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&dpll4_m4x2_ck>;
- ti,bit-shift = <0>;
- reg = <0x0e00>;
- ti,set-rate-parent;
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss1_alwon_fck_3430es1";
+ clocks = <&dpll4_m4x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
};
dss_ick: dss_ick_3430es1@e10 {
@@ -179,13 +179,20 @@ mmchs3_fck: clock-mmchs3-fck {
};
};
- dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 {
- #clock-cells = <0>;
- compatible = "ti,dss-gate-clock";
- clocks = <&dpll4_m4x2_ck>;
- ti,bit-shift = <0>;
- reg = <0x0e00>;
- ti,set-rate-parent;
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,dss-gate-clock";
+ clock-output-names = "dss1_alwon_fck_3430es2";
+ clocks = <&dpll4_m4x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
};
dss_ick: dss_ick_3430es2@e10 {
@@ -1022,28 +1022,36 @@ core_l4_ick: core_l4_ick {
clock-div = <1>;
};
- dss_tv_fck: dss_tv_fck@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&omap_54m_fck>;
- reg = <0x0e00>;
- ti,bit-shift = <2>;
- };
+ /* CM_FCLKEN_DSS */
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- dss_96m_fck: dss_96m_fck@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&omap_96m_fck>;
- reg = <0x0e00>;
- ti,bit-shift = <2>;
- };
+ dss_tv_fck: clock-dss-tv-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss_tv_fck";
+ clocks = <&omap_54m_fck>;
+ ti,bit-shift = <2>;
+ };
- dss2_alwon_fck: dss2_alwon_fck@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&sys_ck>;
- reg = <0x0e00>;
- ti,bit-shift = <1>;
+ dss_96m_fck: clock-dss-96m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss_96m_fck";
+ clocks = <&omap_96m_fck>;
+ ti,bit-shift = <2>;
+ };
+
+ dss2_alwon_fck: clock-dss2-alwon-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss2_alwon_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <1>;
+ };
};
dummy_ck: dummy_ck {
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap3430es1-clocks.dtsi | 21 +++++--- ...map36xx-am35xx-omap3430es2plus-clocks.dtsi | 21 +++++--- arch/arm/boot/dts/omap3xxx-clocks.dtsi | 48 +++++++++++-------- 3 files changed, 56 insertions(+), 34 deletions(-)