| Message ID | 20220504105254.1576-4-Gireesh.Hiremath@in.bosch.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] ARM: dts: am335x: Guardian: switch to AM33XX_PADCONF pinmux macro | expand |
On 04/05/2022 12:52, Gireesh.Hiremath@in.bosch.com wrote: > From: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> > > Add binding definition for the support of the Guardian > mt matrix keypad driver. > > Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> > --- > .../bindings/input/mt-matrix-keypad.yaml | 134 ++++++++++++++++++ > 1 file changed, 134 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/mt-matrix-keypad.yaml > > diff --git a/Documentation/devicetree/bindings/input/mt-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/mt-matrix-keypad.yaml > new file mode 100644 > index 000000000000..b52cd478f638 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/mt-matrix-keypad.yaml > @@ -0,0 +1,134 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/mt-matrix-keypad.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: GPIO driven mt matrix keypad device tree bindings > + > +maintainers: > + - vinay <VinayKumar.Shettar@in.bosch.com> > + > +description: | > + GPIO driven mt matrix keypad is used to interface a SoC with a mt matrix > + keypad. The mt matrix keypad supports multiple gpio line, all gpio line act s/line/lines/ > + as row as wel as column lines, a key can be placed at each intersection s/wel/well/ > + of a unique row number not equal to a unique column and they are diagonally > + symmetric. > + What is "mt" in the "mt matrix"? > + Example- For 5 gpio lines, possible matrix is 5x5 and maximum possible > + keys are 10. > + > + Sample matrix table for 7 button and 5 gpio line > + > + ------------------------------------------------------ > + |Row\Col |GPIO 0 | GPIO 1 | GPIO 2 | GPIO 3 | GPIO 4 | > + ------------------------------------------------------ > + | GPIO 0 | X | KEY_9 | KEY_2 | X | KEY_1 | > + ------------------------------------------------------ > + | GPIO 1 | KEY_9 | X | KEY_6 | X | X | > + ------------------------------------------------------ > + | GPIO 2 | KEY_2 | KEY_6 | X | KEY_4 | KEY_7 | > + ------------------------------------------------------ > + | GPIO 3 | X | X | KEY_4 | X | KEY_8 | > + ------------------------------------------------------ > + | GPIO 4 | KEY_1 | X | KEY_7 | KEY_8 | X | > + ------------------------------------------------------ > + X - invalid key > + KEY_x - preferred key code > + > + The mt matrix keypad can sense a key-press and key-release by means of GPIO > + lines and report the event using GPIO interrupts to the cpu. > + > +properties: > + compatible: > + oneOf: > + - const: gpio-mt-matrix-keypad > + - items: > + - enum: > + - gpio-mt-matrix-keypad > + - const: gpio-mt-matrix-keypad Aren't all these compatibles the same? > + > + debounce-delay-ms: > + description: Delay after the first bounce of button. > + default: 0 > + > + col-scan-delay-us: > + description: Delay before scanning next active line. > + default: 0 > + > + number-of-button: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Number of button connected to the keypad controller. s/button/buttons/ I presume. > + > + linux,no-autorepeat: > + description: | > + Disable the Linux input system's autorepeat feature on the input device. > + > + gpio-activelow: > + description: Gpio line are active low. No, GPIOs should instead use common flags. > + > + line-gpios: > + description: | > + Gpio lines connected to keypad controller. > + all gpio line act as row as wel as column lines. > + > + linux,keymap: > + $ref: '/schemas/types.yaml#/definitions/uint32-array' > + description: | > + An array of packed 1-cell entries containing the equivalent of row, > + column and linux key-code. The 32-bit big endian cell is packed as: > + row << 24 | column << 16 | key-code But anyway this should be just merged into matrix-keypad. It's a simpler set of that binding. > + > +required: > + - compatible > + - number-of-button > + - line-gpios > + - linux,keymap > + > +additionalProperties: true This cannot be true. > + > +examples: > + - | > + mt_matrix_keypad { No underscores in node names. Generic node name, so just "keypad". Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/input/mt-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/mt-matrix-keypad.yaml new file mode 100644 index 000000000000..b52cd478f638 --- /dev/null +++ b/Documentation/devicetree/bindings/input/mt-matrix-keypad.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/mt-matrix-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO driven mt matrix keypad device tree bindings + +maintainers: + - vinay <VinayKumar.Shettar@in.bosch.com> + +description: | + GPIO driven mt matrix keypad is used to interface a SoC with a mt matrix + keypad. The mt matrix keypad supports multiple gpio line, all gpio line act + as row as wel as column lines, a key can be placed at each intersection + of a unique row number not equal to a unique column and they are diagonally + symmetric. + + Example- For 5 gpio lines, possible matrix is 5x5 and maximum possible + keys are 10. + + Sample matrix table for 7 button and 5 gpio line + + ------------------------------------------------------ + |Row\Col |GPIO 0 | GPIO 1 | GPIO 2 | GPIO 3 | GPIO 4 | + ------------------------------------------------------ + | GPIO 0 | X | KEY_9 | KEY_2 | X | KEY_1 | + ------------------------------------------------------ + | GPIO 1 | KEY_9 | X | KEY_6 | X | X | + ------------------------------------------------------ + | GPIO 2 | KEY_2 | KEY_6 | X | KEY_4 | KEY_7 | + ------------------------------------------------------ + | GPIO 3 | X | X | KEY_4 | X | KEY_8 | + ------------------------------------------------------ + | GPIO 4 | KEY_1 | X | KEY_7 | KEY_8 | X | + ------------------------------------------------------ + X - invalid key + KEY_x - preferred key code + + The mt matrix keypad can sense a key-press and key-release by means of GPIO + lines and report the event using GPIO interrupts to the cpu. + +properties: + compatible: + oneOf: + - const: gpio-mt-matrix-keypad + - items: + - enum: + - gpio-mt-matrix-keypad + - const: gpio-mt-matrix-keypad + + debounce-delay-ms: + description: Delay after the first bounce of button. + default: 0 + + col-scan-delay-us: + description: Delay before scanning next active line. + default: 0 + + number-of-button: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of button connected to the keypad controller. + + linux,no-autorepeat: + description: | + Disable the Linux input system's autorepeat feature on the input device. + + gpio-activelow: + description: Gpio line are active low. + + line-gpios: + description: | + Gpio lines connected to keypad controller. + all gpio line act as row as wel as column lines. + + linux,keymap: + $ref: '/schemas/types.yaml#/definitions/uint32-array' + description: | + An array of packed 1-cell entries containing the equivalent of row, + column and linux key-code. The 32-bit big endian cell is packed as: + row << 24 | column << 16 | key-code + +required: + - compatible + - number-of-button + - line-gpios + - linux,keymap + +additionalProperties: true + +examples: + - | + mt_matrix_keypad { + compatible = "gpio-mt-matrix-keypad"; + debounce-delay-ms = <10>; + col-scan-delay-us = <2>; + number-of-button = <7>; + linux,no-autorepeat; + gpio-activelow; + line-gpios = < + &gpio1 24 1 /*gpio_56*/ + &gpio1 23 1 /*gpio_55*/ + &gpio1 22 1 /*gpio_54*/ + &gpio1 20 1 /*gpio_52*/ + &gpio1 16 1 /*gpio_48*/ + >; + linux,keymap = < + 0x00000000 /* row 0, col 0, KEY_RESERVED/invalid key */ + 0x0001000a /* row 0, col 1, KEY_9 */ + 0x00020003 /* row 0, col 2, KEY_2 */ + 0x00030000 /* row 0, col 3, KEY_RESERVED/invalid key */ + 0x00040002 /* row 0, col 4, KEY_1 */ + 0x0100000a /* row 1, col 0, KEY_9 */ + 0x01010000 /* row 1, col 1, KEY_RESERVED/invalid key */ + 0x01020007 /* row 1, col 2, KEY_6 */ + 0x01030000 /* row 1, col 3, KEY_RESERVED/invalid key */ + 0x01040000 /* row 1, col 4, KEY_RESERVED/invalid key */ + 0x02000003 /* row 2, col 0, KEY_2 */ + 0x02010007 /* row 2, col 1, KEY_6 */ + 0x02020000 /* row 2, col 2, KEY_RESERVED/invalid key */ + 0x02030005 /* row 2, col 3, KEY_4 */ + 0x02040008 /* row 2, col 4, KEY_7 */ + 0x03000000 /* row 3, col 0, KEY_RESERVED/invalid key */ + 0x03010000 /* row 3, col 1, KEY_RESERVED/invalid key */ + 0x03020005 /* row 3, col 2, KEY_4 */ + 0x03030000 /* row 3, col 3, KEY_RESERVED/invalid key */ + 0x03040009 /* row 3, col 4, KEY_8 */ + 0x04000002 /* row 4, col 0, KEY_1 */ + 0x04010000 /* row 4, col 1, KEY_RESERVED/invalid key */ + 0x04020008 /* row 4, col 2, KEY_7 */ + 0x04030009 /* row 4, col 3, KEY_8 */ + 0x04040000 /* row 4, col 4, KEY_RESERVED/invalid key */ + >; + };