diff mbox series

[v2,5/5] ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices

Message ID 20220726083444.10159-5-yegorslists@googlemail.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/5] ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices | expand

Commit Message

Yegor Yefremov July 26, 2022, 8:34 a.m. UTC 
From: Yegor Yefremov <yegorslists@googlemail.com>

Add GPIO names for SoC lines.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
Changes:
	v1 -> v2: no changes

 arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 144 +++++++++++++++++++
 1 file changed, 144 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index c6cc1c6218a9..6ed886c3306b 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -93,3 +93,147 @@ 
 	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};