@@ -17,9 +17,8 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
#include <linux/of_platform.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
@@ -251,7 +250,7 @@ static int twl6040_power_up_automatic(struct twl6040 *twl6040)
{
int time_left;
- gpio_set_value(twl6040->audpwron, 1);
+ gpiod_set_value_cansleep(twl6040->audpwron, 1);
time_left = wait_for_completion_timeout(&twl6040->ready,
msecs_to_jiffies(144));
@@ -262,7 +261,7 @@ static int twl6040_power_up_automatic(struct twl6040 *twl6040)
intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
if (!(intid & TWL6040_READYINT)) {
dev_err(twl6040->dev, "automatic power-up failed\n");
- gpio_set_value(twl6040->audpwron, 0);
+ gpiod_set_value_cansleep(twl6040->audpwron, 0);
return -ETIMEDOUT;
}
}
@@ -290,7 +289,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
/* Allow writes to the chip */
regcache_cache_only(twl6040->regmap, false);
- if (gpio_is_valid(twl6040->audpwron)) {
+ if (twl6040->audpwron) {
/* use automatic power-up sequence */
ret = twl6040_power_up_automatic(twl6040);
if (ret) {
@@ -337,9 +336,9 @@ int twl6040_power(struct twl6040 *twl6040, int on)
if (--twl6040->power_count)
goto out;
- if (gpio_is_valid(twl6040->audpwron)) {
+ if (twl6040->audpwron) {
/* use AUDPWRON line */
- gpio_set_value(twl6040->audpwron, 0);
+ gpiod_set_value_cansleep(twl6040->audpwron, 0);
/* power-down sequence latency */
usleep_range(500, 700);
@@ -712,18 +711,16 @@ static int twl6040_probe(struct i2c_client *client,
}
/* ERRATA: Automatic power-up is not possible in ES1.0 */
- if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
- twl6040->audpwron = of_get_named_gpio(node,
- "ti,audpwron-gpio", 0);
- else
- twl6040->audpwron = -EINVAL;
-
- if (gpio_is_valid(twl6040->audpwron)) {
- ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
- GPIOF_OUT_INIT_LOW, "audpwron");
+ if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
+ twl6040->audpwron = devm_gpiod_get_optional(&client->dev,
+ "ti,audpwron",
+ GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(twl6040->audpwron);
if (ret)
goto gpio_err;
+ gpiod_set_consumer_name(twl6040->audpwron, "audpwron");
+
/* Clear any pending interrupt */
twl6040_reg_read(twl6040, TWL6040_REG_INTID);
}
@@ -196,13 +196,14 @@ struct twl6040_gpo_data {
};
struct twl6040_platform_data {
- int audpwron_gpio; /* audio power-on gpio */
+ struct gpio_desc *audpwron_gpio; /* audio power-on gpio */
struct twl6040_codec_data *codec;
struct twl6040_vibra_data *vibra;
struct twl6040_gpo_data *gpo;
};
+struct gpio_desc;
struct regmap;
struct regmap_irq_chips_data;
@@ -218,7 +219,7 @@ struct twl6040 {
struct mfd_cell cells[TWL6040_CELLS];
struct completion ready;
- int audpwron;
+ struct gpio_desc *audpwron;
int power_count;
int rev;
This patch switches the dirver from legacy gpio API to a newer gpiod API so that we can eventually drop the former. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/mfd/twl6040.c | 29 +++++++++++++---------------- include/linux/mfd/twl6040.h | 5 +++-- 2 files changed, 16 insertions(+), 18 deletions(-)