@@ -5,6 +5,7 @@
* Copyright (C) 2008 Nokia Corporation
*/
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -12,15 +13,19 @@
#include <linux/swab.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include "wl1251.h"
#include "reg.h"
#include "spi.h"
+struct wl1251_spi {
+ struct spi_device *spi;
+ struct gpio_desc *power_gpio;
+};
+
static irqreturn_t wl1251_irq(int irq, void *cookie)
{
struct wl1251 *wl;
@@ -34,13 +39,9 @@ static irqreturn_t wl1251_irq(int irq, void *cookie)
return IRQ_HANDLED;
}
-static struct spi_device *wl_to_spi(struct wl1251 *wl)
-{
- return wl->if_priv;
-}
-
static void wl1251_spi_reset(struct wl1251 *wl)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
u8 *cmd;
struct spi_transfer t;
struct spi_message m;
@@ -60,7 +61,7 @@ static void wl1251_spi_reset(struct wl1251 *wl)
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
@@ -69,6 +70,7 @@ static void wl1251_spi_reset(struct wl1251 *wl)
static void wl1251_spi_wake(struct wl1251 *wl)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
struct spi_transfer t;
struct spi_message m;
u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
@@ -112,7 +114,7 @@ static void wl1251_spi_wake(struct wl1251 *wl)
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
@@ -128,6 +130,7 @@ static void wl1251_spi_reset_wake(struct wl1251 *wl)
static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
struct spi_transfer t[3];
struct spi_message m;
u8 *busy_buf;
@@ -157,7 +160,7 @@ static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
t[2].len = len;
spi_message_add_tail(&t[2], &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
/* FIXME: check busy words */
@@ -168,6 +171,7 @@ static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
+ struct wl1251_spi *wl_spi = wl->if_priv;
struct spi_transfer t[2];
struct spi_message m;
u32 *cmd;
@@ -190,7 +194,7 @@ static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
t[1].len = len;
spi_message_add_tail(&t[1], &m);
- spi_sync(wl_to_spi(wl), &m);
+ spi_sync(wl_spi->spi, &m);
wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
@@ -208,8 +212,10 @@ static void wl1251_spi_disable_irq(struct wl1251 *wl)
static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
{
- if (gpio_is_valid(wl->power_gpio))
- gpio_set_value(wl->power_gpio, enable);
+ struct wl1251_spi *wl_spi = wl->if_priv;
+
+ if (wl_spi->power_gpio)
+ gpiod_set_value_cansleep(wl_spi->power_gpio, enable);
return 0;
}
@@ -227,12 +233,19 @@ static int wl1251_spi_probe(struct spi_device *spi)
{
struct device_node *np = spi->dev.of_node;
struct ieee80211_hw *hw;
+ struct wl1251_spi *wl_spi;
struct wl1251 *wl;
int ret;
if (!np)
return -ENODEV;
+ wl_spi = devm_kzalloc(&spi->dev, sizeof(*wl_spi), GFP_KERNEL);
+ if (!wl_spi)
+ return -ENOMEM;
+
+ wl_spi->spi = spi;
+
hw = wl1251_alloc_hw();
if (IS_ERR(hw))
return PTR_ERR(hw);
@@ -241,7 +254,7 @@ static int wl1251_spi_probe(struct spi_device *spi)
SET_IEEE80211_DEV(hw, &spi->dev);
spi_set_drvdata(spi, wl);
- wl->if_priv = spi;
+ wl->if_priv = wl_spi;
wl->if_ops = &wl1251_spi_ops;
/* This is the only SPI value that we need to set here, the rest
@@ -257,25 +270,17 @@ static int wl1251_spi_probe(struct spi_device *spi)
wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom");
- wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0);
- if (wl->power_gpio == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto out_free;
- }
-
- if (gpio_is_valid(wl->power_gpio)) {
- ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
- GPIOF_OUT_INIT_LOW, "wl1251 power");
- if (ret) {
+ wl_spi->power_gpio = devm_gpiod_get_optional(&spi->dev, "ti,power",
+ GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(wl_spi->power_gpio);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
wl1251_error("Failed to request gpio: %d\n", ret);
- goto out_free;
- }
- } else {
- wl1251_error("set power gpio missing in platform data");
- ret = -ENODEV;
goto out_free;
}
+ gpiod_set_consumer_name(wl_spi->power_gpio, "wl1251 power");
+
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1251_error("irq missing in platform data");
@@ -262,7 +262,6 @@ struct wl1251 {
void *if_priv;
const struct wl1251_if_operations *if_ops;
- int power_gpio;
int irq;
bool use_eeprom;
Switch the driver from legacy gpio API to the newer gpiod API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/net/wireless/ti/wl1251/spi.c | 63 +++++++++++++------------ drivers/net/wireless/ti/wl1251/wl1251.h | 1 - 2 files changed, 34 insertions(+), 30 deletions(-)