| Message ID | 20221122123225.59106-1-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/2] dt-bindings: pwm: Allow decimal format in addition to hex format | expand |
On 22/11/2022 13:32, Tony Lindgren wrote: > Let's allow node numbering in decimal format too. > > Simple human-readable increments/IDs are usually decimal, hex is only for > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > Let's use an improved match suggested by Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > <u.kleine-koenig@pengutronix.de>. > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > Let's allow node numbering in decimal format too. > > Simple human-readable increments/IDs are usually decimal, hex is only for > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > Let's use an improved match suggested by Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > <u.kleine-koenig@pengutronix.de>. > > Cc: linux-pwm@vger.kernel.org > Cc: Thierry Reding <thierry.reding@gmail.com> > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Which tree should this merged through? The obvious candidates are pwm, dt and omap. Best regards Uwe
* Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [221122 13:28]: > On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > > Let's allow node numbering in decimal format too. > > > > Simple human-readable increments/IDs are usually decimal, hex is only for > > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > > > Let's use an improved match suggested by Krzysztof Kozlowski > > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > > <u.kleine-koenig@pengutronix.de>. > > > > Cc: linux-pwm@vger.kernel.org > > Cc: Thierry Reding <thierry.reding@gmail.com> > > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > Which tree should this merged through? The obvious candidates are pwm, > dt and omap. The dt folks usually queue the binding patches separately. Regards, Tony
Hello Tony, On Tue, Nov 22, 2022 at 03:41:58PM +0200, Tony Lindgren wrote: > * Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [221122 13:28]: > > On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > > > Let's allow node numbering in decimal format too. > > > > > > Simple human-readable increments/IDs are usually decimal, hex is only for > > > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > > > > > Let's use an improved match suggested by Krzysztof Kozlowski > > > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > > > <u.kleine-koenig@pengutronix.de>. > > > > > > Cc: linux-pwm@vger.kernel.org > > > Cc: Thierry Reding <thierry.reding@gmail.com> > > > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > > > Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > > > Which tree should this merged through? The obvious candidates are pwm, > > dt and omap. > > The dt folks usually queue the binding patches separately. fine, so I marked your series in the PWM patchwork as "handled-elsewhere". Best regards Uwe
On Tue, Nov 22, 2022 at 03:41:58PM +0200, Tony Lindgren wrote: > * Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [221122 13:28]: > > On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > > > Let's allow node numbering in decimal format too. > > > > > > Simple human-readable increments/IDs are usually decimal, hex is only for > > > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > > > > > Let's use an improved match suggested by Krzysztof Kozlowski > > > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > > > <u.kleine-koenig@pengutronix.de>. > > > > > > Cc: linux-pwm@vger.kernel.org > > > Cc: Thierry Reding <thierry.reding@gmail.com> > > > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > > > Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > > > Which tree should this merged through? The obvious candidates are pwm, > > dt and omap. > > The dt folks usually queue the binding patches separately. The default is they go thru the subsystem trees, and I mainly pickup what has not after some time (and is standalone binding change). Rob
On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > Let's allow node numbering in decimal format too. > > Simple human-readable increments/IDs are usually decimal, hex is only for > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > Let's use an improved match suggested by Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > <u.kleine-koenig@pengutronix.de>. > > Cc: linux-pwm@vger.kernel.org > Cc: Thierry Reding <thierry.reding@gmail.com> > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > > Changes since v2: > > - Use pattern suggested by Krzysztof and Uwe > > Changes since v1: > > - New patch added to deal with pwm-omap-dmtimer binding > > --- > Documentation/devicetree/bindings/pwm/pwm.yaml | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml > --- a/Documentation/devicetree/bindings/pwm/pwm.yaml > +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml > @@ -13,7 +13,7 @@ select: false > > properties: > $nodename: > - pattern: "^pwm(@.*|-[0-9a-f])*$" > + pattern: "^pwm(@.+|-[0-9a-f]+)?$" So now pwm-10 could be either? I'm fine with decimal, but can we do that everywhere we do this -N naming? > > "#pwm-cells": > description: > -- > 2.38.1 >
* Rob Herring <robh@kernel.org> [221123 02:31]: > On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > > Let's allow node numbering in decimal format too. > > > > Simple human-readable increments/IDs are usually decimal, hex is only for > > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > > > Let's use an improved match suggested by Krzysztof Kozlowski > > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > > <u.kleine-koenig@pengutronix.de>. > > > > Cc: linux-pwm@vger.kernel.org > > Cc: Thierry Reding <thierry.reding@gmail.com> > > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > --- > > > > Changes since v2: > > > > - Use pattern suggested by Krzysztof and Uwe > > > > Changes since v1: > > > > - New patch added to deal with pwm-omap-dmtimer binding > > > > --- > > Documentation/devicetree/bindings/pwm/pwm.yaml | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml > > --- a/Documentation/devicetree/bindings/pwm/pwm.yaml > > +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml > > @@ -13,7 +13,7 @@ select: false > > > > properties: > > $nodename: > > - pattern: "^pwm(@.*|-[0-9a-f])*$" > > + pattern: "^pwm(@.+|-[0-9a-f]+)?$" > > So now pwm-10 could be either? Yes. > I'm fine with decimal, but can we do that everywhere we do this -N > naming? Do you mean the '[0-9a-f]' users that don't use '[0-9af]+'? These can be found with: $ find Documentation/devicetree/bindings/ -name \*.yaml | \ xargs grep pattern: | grep '\[0-9a-f\]' | grep -v '\[0-9a-f\]+' Not sure if some of these need to intentionally limit the node numbering to 15. If you have some other criteria in mind, let me know :) That sounds like a separate patch though. Regards, Tony
On Wed, Nov 23, 2022 at 08:58:54AM +0200, Tony Lindgren wrote: > * Rob Herring <robh@kernel.org> [221123 02:31]: > > On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > > > Let's allow node numbering in decimal format too. > > > > > > Simple human-readable increments/IDs are usually decimal, hex is only for > > > addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. > > > > > > Let's use an improved match suggested by Krzysztof Kozlowski > > > <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König > > > <u.kleine-koenig@pengutronix.de>. > > > > > > Cc: linux-pwm@vger.kernel.org > > > Cc: Thierry Reding <thierry.reding@gmail.com> > > > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > > Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > > --- > > > > > > Changes since v2: > > > > > > - Use pattern suggested by Krzysztof and Uwe > > > > > > Changes since v1: > > > > > > - New patch added to deal with pwm-omap-dmtimer binding > > > > > > --- > > > Documentation/devicetree/bindings/pwm/pwm.yaml | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml > > > --- a/Documentation/devicetree/bindings/pwm/pwm.yaml > > > +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml > > > @@ -13,7 +13,7 @@ select: false > > > > > > properties: > > > $nodename: > > > - pattern: "^pwm(@.*|-[0-9a-f])*$" > > > + pattern: "^pwm(@.+|-[0-9a-f]+)?$" > > > > So now pwm-10 could be either? > > Yes. > > > I'm fine with decimal, but can we do that everywhere we do this -N > > naming? > > Do you mean the '[0-9a-f]' users that don't use '[0-9af]+'? No, I mean for all cases of <nodename>-N, can be we consistent. Either we use hex or we use decimal. > > These can be found with: > > $ find Documentation/devicetree/bindings/ -name \*.yaml | \ > xargs grep pattern: | grep '\[0-9a-f\]' | grep -v '\[0-9a-f\]+' Not quite. It's just cases of '-N': $ find Documentation/devicetree/bindings/ -name \*.yaml | xargs grep pattern: | grep '\-\[0-9a-f\]' | grep -v '\[0-9a-f\]+' Documentation/devicetree/bindings/phy/intel,combo-phy.yaml: pattern: "combophy(@.*|-[0-9a-f])*$" Documentation/devicetree/bindings/pwm/pwm.yaml: pattern: "^pwm(@.*|-[0-9a-f])*$" Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml: pattern: "^timestamp(@.*|-[0-9a-f])?$" Documentation/devicetree/bindings/watchdog/watchdog.yaml: pattern: "^watchdog(@.*|-[0-9a-f])?$" Documentation/devicetree/bindings/spi/spi-controller.yaml: pattern: "^spi(@.*|-[0-9a-f])*$" Documentation/devicetree/bindings/rtc/rtc.yaml: pattern: "^rtc(@.*|-[0-9a-f])*$" And there's probably some more in dtschema. > > Not sure if some of these need to intentionally limit the node numbering > to 15. No, I think it was all just cases of 15 should be enough for anyone. > > If you have some other criteria in mind, let me know :) If the numbering is hex, then it is as you have it. (Though we can't enforce that. If it is decimal, then the regex should be ([0-9]|[1-9][0-9]+). Rob
Hi Rob, * Rob Herring <robh@kernel.org> [221127 18:22]: > On Wed, Nov 23, 2022 at 08:58:54AM +0200, Tony Lindgren wrote: > > * Rob Herring <robh@kernel.org> [221123 02:31]: > > > On Tue, Nov 22, 2022 at 02:32:24PM +0200, Tony Lindgren wrote: > > > > --- a/Documentation/devicetree/bindings/pwm/pwm.yaml > > > > +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml > > > > @@ -13,7 +13,7 @@ select: false > > > > > > > > properties: > > > > $nodename: > > > > - pattern: "^pwm(@.*|-[0-9a-f])*$" > > > > + pattern: "^pwm(@.+|-[0-9a-f]+)?$" > > > > > > So now pwm-10 could be either? > > > > Yes. > > > > > I'm fine with decimal, but can we do that everywhere we do this -N > > > naming? > > > > Do you mean the '[0-9a-f]' users that don't use '[0-9af]+'? > > No, I mean for all cases of <nodename>-N, can be we consistent. Either > we use hex or we use decimal. > > > > > These can be found with: > > > > $ find Documentation/devicetree/bindings/ -name \*.yaml | \ > > xargs grep pattern: | grep '\[0-9a-f\]' | grep -v '\[0-9a-f\]+' > > Not quite. It's just cases of '-N': > > $ find Documentation/devicetree/bindings/ -name \*.yaml | xargs grep pattern: | grep '\-\[0-9a-f\]' | grep -v '\[0-9a-f\]+' > Documentation/devicetree/bindings/phy/intel,combo-phy.yaml: pattern: "combophy(@.*|-[0-9a-f])*$" > Documentation/devicetree/bindings/pwm/pwm.yaml: pattern: "^pwm(@.*|-[0-9a-f])*$" > Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml: pattern: "^timestamp(@.*|-[0-9a-f])?$" > Documentation/devicetree/bindings/watchdog/watchdog.yaml: pattern: "^watchdog(@.*|-[0-9a-f])?$" > Documentation/devicetree/bindings/spi/spi-controller.yaml: pattern: "^spi(@.*|-[0-9a-f])*$" > Documentation/devicetree/bindings/rtc/rtc.yaml: pattern: "^rtc(@.*|-[0-9a-f])*$" > > > And there's probably some more in dtschema. Looking at this again, not exactly sure still what you want.. Can you please post some initial patch maybe, verbal patches are a bit tricky :) Regards, Tony
diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml --- a/Documentation/devicetree/bindings/pwm/pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -13,7 +13,7 @@ select: false properties: $nodename: - pattern: "^pwm(@.*|-[0-9a-f])*$" + pattern: "^pwm(@.+|-[0-9a-f]+)?$" "#pwm-cells": description:
Let's allow node numbering in decimal format too. Simple human-readable increments/IDs are usually decimal, hex is only for addresses as noted by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>. Let's use an improved match suggested by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> and improved a bit by Uwe Kleine-König <u.kleine-koenig@pengutronix.de>. Cc: linux-pwm@vger.kernel.org Cc: Thierry Reding <thierry.reding@gmail.com> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> --- Changes since v2: - Use pattern suggested by Krzysztof and Uwe Changes since v1: - New patch added to deal with pwm-omap-dmtimer binding --- Documentation/devicetree/bindings/pwm/pwm.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)