@@ -3,7 +3,7 @@
# Makefile for the kernel serial device drivers.
#
-obj-$(CONFIG_SERIAL_CORE) += serial_core.o
+obj-$(CONFIG_SERIAL_CORE) += serial_core.o serial_port.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
@@ -16,6 +16,7 @@
#include <linux/console.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
@@ -31,6 +32,8 @@
#include <linux/irq.h>
#include <linux/uaccess.h>
+#include "serial_port.h"
+
/*
* Serial port device specific data for serial core.
*
@@ -151,9 +154,31 @@ static void __uart_start(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->uart_port;
+ struct device *port_dev;
+ int err;
+
+ if (!port || uart_tx_stopped(port))
+ return;
- if (port && !uart_tx_stopped(port))
+ port_dev = port->state->port_dev;
+
+ err = pm_runtime_get(port_dev);
+ if (err < 0) {
+ /* Something went wrong, attempt to start TX anyways */
+ port->ops->start_tx(port);
+ pm_runtime_put_noidle(port_dev);
+ return;
+ }
+
+ /*
+ * Start TX if enabled, and kick runtime PM. Otherwise we must
+ * wait for a retry. See also serial_port.c for runtime PM
+ * autosuspend timeout.
+ */
+ if (pm_runtime_active(port_dev))
port->ops->start_tx(port);
+ pm_runtime_mark_last_busy(port_dev);
+ pm_runtime_put_autosuspend(port_dev);
}
static void uart_start(struct tty_struct *tty)
@@ -288,6 +313,37 @@ serial_core_find_controller(struct uart_driver *drv, struct device *dev)
return NULL;
}
+static int serial_core_add_port_device(struct uart_port *port)
+{
+ struct serial_port_platdata pd;
+ struct platform_device *pdev;
+ int ret;
+
+ pdev = platform_device_alloc("serial-port", PLATFORM_DEVID_AUTO);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->dev.parent = port->dev;
+ pd.state = port->state;
+
+ ret = platform_device_add_data(pdev, &pd, sizeof(pd));
+ if (ret)
+ goto err_put;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto err_put;
+
+ port->state->port_dev = &pdev->dev;
+
+ return 0;
+
+err_put:
+ platform_device_put(pdev);
+
+ return ret;
+}
+
/*
* Initialize a serial port device and serial port controller as
* needed. Called from uart_add_one_port() with port_mutex held.
@@ -317,13 +373,21 @@ static int serial_core_register_port(struct uart_port *port,
port->state->controller = controller;
WARN_ON(port->supports_autosuspend != controller->supports_autosuspend);
+ ret = serial_core_add_port_device(port);
+ if (ret)
+ goto err_free;
+
ret = serial_core_pm_runtime_start(port);
if (ret < 0)
- goto err_free;
+ goto err_del;
return 0;
+err_del:
+ platform_device_del(to_platform_device(port->state->port_dev));
+
err_free:
+ port->state->port_dev = NULL;
port->state->controller = NULL;
if (allocated)
kfree(controller);
@@ -339,11 +403,14 @@ static int serial_core_register_port(struct uart_port *port,
static void serial_core_unregister_port(struct uart_port *port)
{
struct serial_controller *controller = to_controller(port);
+ struct device *dev = port->state->port_dev;
/* Check for a registered controller, no struct device early on */
if (!controller)
return;
+ platform_device_del(to_platform_device(dev));
+ port->state->port_dev = NULL;
port->state->controller = NULL;
kref_put(&controller->ref, serial_core_pm_runtime_cleanup);
}
@@ -363,6 +430,10 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
if (uport->type == PORT_UNKNOWN)
return 1;
+ retval = serial_port_get(state);
+ if (retval)
+ return retval;
+
/*
* Make sure the device is in D0 state.
*/
@@ -2030,6 +2101,8 @@ static void uart_port_shutdown(struct tty_port *port)
/* Ensure that the IRQ handler isn't running on another CPU. */
synchronize_irq(uport->irq);
}
+
+ serial_port_put(state);
}
static int uart_carrier_raised(struct tty_port *port)
new file mode 100644
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * Serial port driver to provide port specific services for serial_core
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/serial_core.h>
+
+#include "serial_port.h"
+
+#define SERIAL_PORT_AUTOSUSPEND_DELAY_MS 500
+
+struct serial_port_data {
+ struct uart_state *state;
+};
+
+int serial_port_get(struct uart_state *state)
+{
+ if (!state)
+ return -ENODEV;
+
+ /* Prevent uart_port from unloading */
+ if (!state->port_dev || !state->port_dev->driver ||
+ !try_module_get(state->port_dev->driver->owner))
+ return -ENODEV;
+
+ return 0;
+}
+EXPORT_SYMBOL(serial_port_get);
+
+void serial_port_put(struct uart_state *state)
+{
+ if (!state || !state->port_dev || !state->port_dev->driver)
+ return;
+
+ module_put(state->port_dev->driver->owner);
+}
+EXPORT_SYMBOL(serial_port_put);
+
+/* Only considers TX for now. Caller must take care of locking */
+static int __serial_port_busy(struct uart_port *port)
+{
+ return (!uart_tx_stopped(port) &&
+ uart_circ_chars_pending(&port->state->xmit));
+}
+
+static int serial_port_runtime_resume(struct device *dev)
+{
+ struct serial_port_data *ddata = dev_get_drvdata(dev);
+ struct uart_port *port = ddata->state->uart_port;
+ unsigned long flags;
+
+ /* Flush any pending TX for the port */
+ spin_lock_irqsave(&port->lock, flags);
+ if (__serial_port_busy(port))
+ port->ops->start_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops serial_port_pm = {
+ SET_RUNTIME_PM_OPS(NULL, serial_port_runtime_resume, NULL)
+};
+
+static int serial_port_probe(struct platform_device *pdev)
+{
+ struct serial_port_platdata *pd = dev_get_platdata(&pdev->dev);
+ struct serial_port_data *ddata;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->state = pd->state;
+ platform_set_drvdata(pdev, ddata);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ SERIAL_PORT_AUTOSUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(&pdev->dev);
+
+ return 0;
+}
+
+static int serial_port_remove(struct platform_device *pdev)
+{
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver serial_port_driver = {
+ .driver = {
+ .name = "serial-port",
+ .pm = &serial_port_pm,
+ },
+ .probe = serial_port_probe,
+ .remove = serial_port_remove,
+};
+
+module_platform_driver(serial_port_driver);
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("Serial controller port driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/**
+ * struct serial_port_platdata - Serial port platform data
+ * @state: serial port state
+ *
+ * Used by serial_core and serial_port only. Allocated on uart_add_one_port(),
+ * and freed on uart_remove_one_port(). Note that the life cycle for uart_state
+ * is different from serial_port_device.
+ */
+struct serial_port_platdata {
+ struct uart_state *state;
+};
+
+extern int serial_port_get(struct uart_state *state);
+extern void serial_port_put(struct uart_state *state);
@@ -614,6 +614,7 @@ struct uart_state {
struct tty_port port;
struct serial_controller *controller;
+ struct device *port_dev;
enum uart_pm_state pm_state;
struct circ_buf xmit;
With PM runtime enabled for the serial port controllers, we can now flush pending TX for the port on runtime PM resume as suggested by Johan Hovold <johan@kernel.org>. To flush the pending TX, let's set up each port as a proper device as suggested by Greg Kroah-Hartman <gregkh@linuxfoundation.org>. We set up each port as a child device for the serial port controller device. We use platform device for this and pass the port information in platform_data. Let's just do mimimal changes needed for now, more port specific code can be then moved from serial_core.c to serial_port.c as needed. Suggested-by: Johan Hovold <johan@kernel.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/tty/serial/Makefile | 2 +- drivers/tty/serial/serial_core.c | 77 ++++++++++++++++++++- drivers/tty/serial/serial_port.c | 111 +++++++++++++++++++++++++++++++ drivers/tty/serial/serial_port.h | 16 +++++ include/linux/serial_core.h | 1 + 5 files changed, 204 insertions(+), 3 deletions(-) create mode 100644 drivers/tty/serial/serial_port.c create mode 100644 drivers/tty/serial/serial_port.h