deleted file mode 100644
@@ -1,145 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2006-2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - driver and board
- */
-#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
-#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
-
-#include <linux/cpufreq.h>
-
-struct s3c_cpufreq_info;
-struct s3c_cpufreq_board;
-struct s3c_iotimings;
-
-/**
- * struct s3c_freq - frequency information (mainly for core drivers)
- * @fclk: The FCLK frequency in Hz.
- * @armclk: The ARMCLK frequency in Hz.
- * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
- * @hclk: The HCLK frequency in Hz.
- * @pclk: The PCLK frequency in Hz.
- *
- * This contains the frequency information about the current configuration
- * mainly for the core drivers to ensure we do not end up passing about
- * a large number of parameters.
- *
- * The @hclk_tns field is a useful cache for the parts of the drivers that
- * need to calculate IO timings and suchlike.
- */
-struct s3c_freq {
- unsigned long fclk;
- unsigned long armclk;
- unsigned long hclk_tns; /* in 10ths of ns */
- unsigned long hclk;
- unsigned long pclk;
-};
-
-/**
- * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
- * @freqs: The cpufreq setting information.
- * @old: The old clock settings.
- * @new: The new clock settings.
- * @pll_changing: Set if the PLL is changing.
- *
- * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
- * notification can use this information that is not provided by just
- * having the core frequency alone.
- *
- * The pll_changing flag is used to indicate if the PLL itself is
- * being set during this change. This is important as the clocks
- * will temporarily be set to the XTAL clock during this time, so
- * drivers may want to close down their output during this time.
- *
- * Note, this is not being used by any current drivers and therefore
- * may be removed in the future.
- */
-struct s3c_cpufreq_freqs {
- struct cpufreq_freqs freqs;
- struct s3c_freq old;
- struct s3c_freq new;
-
- unsigned int pll_changing:1;
-};
-
-#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
-
-/**
- * struct s3c_clkdivs - clock divisor information
- * @p_divisor: Divisor from FCLK to PCLK.
- * @h_divisor: Divisor from FCLK to HCLK.
- * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
- * @dvs: Non-zero if using DVS mode for ARMCLK.
- *
- * Divisor settings for the core clocks.
- */
-struct s3c_clkdivs {
- int p_divisor;
- int h_divisor;
- int arm_divisor;
- unsigned char dvs;
-};
-
-#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
-
-/**
- * struct s3c_pllval - PLL value entry.
- * @freq: The frequency for this entry in Hz.
- * @pll_reg: The PLL register setting for this PLL value.
- */
-struct s3c_pllval {
- unsigned long freq;
- unsigned long pll_reg;
-};
-
-/**
- * struct s3c_cpufreq_board - per-board cpu frequency informatin
- * @refresh: The SDRAM refresh period in nanoseconds.
- * @auto_io: Set if the IO timing settings should be generated from the
- * initialisation time hardware registers.
- * @need_io: Set if the board has external IO on any of the chipselect
- * lines that will require the hardware timing registers to be
- * updated on a clock change.
- * @max: The maxium frequency limits for the system. Any field that
- * is left at zero will use the CPU's settings.
- *
- * This contains the board specific settings that affect how the CPU
- * drivers chose settings. These include the memory refresh and IO
- * timing information.
- *
- * Registration depends on the driver being used, the ARMCLK only
- * implementation does not currently need this but the older style
- * driver requires this to be available.
- */
-struct s3c_cpufreq_board {
- unsigned int refresh;
- unsigned int auto_io:1; /* automatically init io timings. */
- unsigned int need_io:1; /* set if needs io timing support. */
-
- /* any non-zero field in here is taken as an upper limit. */
- struct s3c_freq max; /* frequency limits */
-};
-
-/* Things depending on frequency scaling. */
-#ifdef CONFIG_ARM_S3C_CPUFREQ
-#define __init_or_cpufreq
-#else
-#define __init_or_cpufreq __init
-#endif
-
-/* Board functions */
-
-#ifdef CONFIG_ARM_S3C_CPUFREQ
-extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
-#else
-
-static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
- return 0;
-}
-#endif /* CONFIG_ARM_S3C_CPUFREQ */
-
-#endif
The s3c-cpu-freq header was previously included by: ./arch/arm/mach-s3c/mach-bast.c ./arch/arm/mach-s3c/mach-osiris-dvs.c ./arch/arm/mach-s3c/mach-osiris.c ./include/linux/soc/samsung/s3c-cpufreq-core.h Commit a4946a153cb9 ("ARM: s3c: remove all s3c24xx support") removes the files in ./arch/arm/mach-s3c/; commit daf0ee583fc7 ("cpufreq: remove s3c24xx drivers") removes the file s3c-cpufreq-core.h. Remove this obsolete header file. This issue was identified, as s3c-cpu-freq.h referred to the removed config ARM_S3C_CPUFREQ. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> --- include/linux/soc/samsung/s3c-cpu-freq.h | 145 ----------------------- 1 file changed, 145 deletions(-) delete mode 100644 include/linux/soc/samsung/s3c-cpu-freq.h