diff mbox series

[3/8] ARM: dts: am335x-wega: Change node name of sound card, remove underscores.

Message ID 20230214132302.39087-3-s.hemer@phytec.de (mailing list archive)
State New, archived
Headers show
Series [1/8] ARM: dts: am335x-phycore-som: Add alias for TPS65910 RTC | expand

Commit Message

Steffen Hemer Feb. 14, 2023, 1:22 p.m. UTC 
Change node name of sound card to recommended generic and remove also
further underscores in other node names.

Signed-off-by: Steffen Hemer <s.hemer@phytec.de>
---
 arch/arm/boot/dts/am335x-wega.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 6c5d26bbe952..7e9a07b519bd 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -8,7 +8,7 @@  / {
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
-	sound: sound-iface {
+	sound: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "snd-wega";
 		simple-audio-card,format = "i2s";
@@ -50,7 +50,7 @@  vcc3v3: fixedregulator1 {
 
 /* Audio */
 &am33xx_pinmux {
-	mcasp0_pins: pinmux_mcasp0 {
+	mcasp0_pins: pinmux-mcasp0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -91,7 +91,7 @@  &mcasp0 {
 
 /* CAN Busses */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
@@ -107,7 +107,7 @@  &dcan1 {
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: pinmux-ethernet1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
@@ -147,7 +147,7 @@  &mac_sw {
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
+	mmc1_pins: pinmux-mmc1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -177,14 +177,14 @@  &vdig1_reg {
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: pinmux-uart1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)