@@ -26,7 +26,7 @@ backlight: backlight {
extcon_usbc_det: usbc-det {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+ id-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbc_det>;
};
@@ -29,7 +29,7 @@ chosen {
extcon_usbc_det: usbc-det {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+ id-gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbc_det>;
};
@@ -168,8 +168,8 @@ blue3-led {
};
&extcon_usb2 {
- id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
@@ -197,7 +197,7 @@ brcmf_pwrseq: brcmf_pwrseq {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
ti,enable-id-detection;
- id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
};
@@ -169,8 +169,8 @@ blue3-led {
};
&extcon_usb2 {
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
@@ -15,12 +15,12 @@ chosen {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
sound0: sound0 {
@@ -293,11 +293,11 @@ &hdmi {
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&ipu2 {
@@ -96,12 +96,12 @@ evm_3v3_sd: fixedregulator-sd {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
hdmi0: connector {
@@ -533,11 +533,11 @@ &pcie1_ep {
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&m_can0 {
Use id-gpios and vbus-gpios instead. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Changes in v3: * Rebased to next-20230721 * Split from bindings patch arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi | 2 +- arch/arm/boot/dts/ti/omap/am571x-idk.dts | 4 ++-- arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts | 2 +- arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi | 4 ++-- arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi | 4 ++-- arch/arm/boot/dts/ti/omap/dra71-evm.dts | 4 ++-- arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi | 4 ++-- arch/arm/boot/dts/ti/omap/dra76-evm.dts | 4 ++-- 9 files changed, 15 insertions(+), 15 deletions(-)