| Message ID | 20230822143051.7640-5-twoerner@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/4] ARM: dts: am335x-pocketbeagle: update LED information | expand |
* Trevor Woerner <twoerner@gmail.com> [230822 14:31]: > Add the default MODE setting of a GPIO pin that was missing from the device > tree (i.e. P2.20/gpio2_00). This is to ensure the GPIO pins match the > pocketbeagle wiring expectations. > > Signed-off-by: Trevor Woerner <twoerner@gmail.com> > --- > arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts > index e35d84ca5706..8042917b3b3b 100644 > --- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts > +++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts > @@ -271,6 +271,16 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) > pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; > }; > > + /* P2_20 (ZCZ ball T13) gpio2_00 0x888 */ > + P2_20_gpio: P2-20-gpio-pins { > + pinctrl-single,pins = < > + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7) > + >; > + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; > + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; > + }; > + > + > /* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */ > P2_10_gpio: P2-10-gpio-pins { > pinctrl-single,pins = < Thanks applying all four patches into omap-for-v6.7/dt. I left out the extra line break above though. Regards, Tony
diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts index e35d84ca5706..8042917b3b3b 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts @@ -271,6 +271,16 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; }; + /* P2_20 (ZCZ ball T13) gpio2_00 0x888 */ + P2_20_gpio: P2-20-gpio-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */ P2_10_gpio: P2-10-gpio-pins { pinctrl-single,pins = <
Add the default MODE setting of a GPIO pin that was missing from the device tree (i.e. P2.20/gpio2_00). This is to ensure the GPIO pins match the pocketbeagle wiring expectations. Signed-off-by: Trevor Woerner <twoerner@gmail.com> --- arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)