[V2,1/2] arm:dts: am3517-evm: Fix LED3/4 pinmux

Commit Message

Adam Ford Sept. 8, 2023, 8:48 p.m. UTC

The pinmux for LED3 and LED4 are incorrectly attached to the
omap3_pmx_core when they should be connected to the omap3_pmx_wkup
pin mux.  This was likely masked by the fact that the bootloader
used to do all the pinmuxing.

Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton")
Signed-off-by: Adam Ford <[e-mail]>
---

V2:  Use current device tree naming convention for led-pins

This likely will require a separate patch to apply to previous file location.

Patch

diff --git a/arch/arm/boot/dts/ti/omap/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
index af9df15274be..866f68c5b504 100644
--- a/arch/arm/boot/dts/ti/omap/am3517-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
@@ -271,13 +271,6 @@  OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
 		>;
 	};
 
-	leds_pins: leds-pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
-			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
-		>;
-	};
-
 	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -355,3 +348,12 @@  OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
 		>;
 	};
 };
+
+&omap3_pmx_wkup {
+	leds_pins: leds-pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+};