From patchwork Sat Nov 25 09:42:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tony Lindgren X-Patchwork-Id: 13468436 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=atomide.com header.i=@atomide.com header.b="kX2LRU5U" Received: from mail5.25mail.st (mail5.25mail.st [74.50.62.9]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 41F1010C1; Sat, 25 Nov 2023 01:43:38 -0800 (PST) Received: from localhost (91-158-86-216.elisa-laajakaista.fi [91.158.86.216]) by mail5.25mail.st (Postfix) with ESMTPSA id E343960BB9; Sat, 25 Nov 2023 09:43:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=atomide.com; s=25mailst; t=1700905417; bh=It1pV+Gd7fMa9E/eHgnxkdQGRg1oLH4sK1tgrOH2Nt4=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=kX2LRU5UkUPBfsdftMag14Bj7q0aLh+t9bkg49xKfaWVoZqlXpXEFjYvSpbCdQOsW LijVc9PscsTuUldVNz9YgeNlQAj1BM7xh27qBHJaY5fF6KAI5SiHzximZBUgdCWd8w fYI4A6ld7yDDlcT94MTLyi9W3UA6uGqYI6nBrBcjbPesbhcBNYglt3HS0KZJnd3E7v PivITpQTQeKopGyySiwqn5Lj+lw/Pkj0Dddp9Ss1ZYjBmWzjVaXT36UfWi9Pr8j02O 9VGz63kl2gpDTp8JEDv4tVkdnrkc8ILGbZ18IB/Dcpl6R9wvuXhIrXAy6MygA2ufo0 mhQGe/EGg7GJA== From: Tony Lindgren To: linux-omap@vger.kernel.org Cc: =?utf-8?q?Beno=C3=AEt_Cousson?= , Carl Philipp Klemm , Ivaylo Dimitrov , Merlijn Wajer , Pavel Machek , Sebastian Reichel , devicetree@vger.kernel.org Subject: [PATCH 2/4] ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894 Date: Sat, 25 Nov 2023 11:42:46 +0200 Message-ID: <20231125094248.43537-2-tony@atomide.com> X-Mailer: git-send-email 2.42.1 In-Reply-To: <20231125094248.43537-1-tony@atomide.com> References: <20231125094248.43537-1-tony@atomide.com> Precedence: bulk X-Mailing-List: linux-omap@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The LCD regulator and backlight are specific only to droid bionic xt875 and droid4 xt894. On droid razr xt910 and xt912, the LCD regulator and backlight are different. The LCD and backlight are also different on the the mz609 tablets. Let's add a common motorola-mapphone-xt8xx.dtsi to make it easy to add support for xt910 and xt912 and the mz609 to mz617 tablets. While at it, let's also move aliases to the board specific dts files where they belong. And let's move the omap4-droid4-xt894.dts compatible to the top. Signed-off-by: Tony Lindgren --- .../dts/ti/omap/motorola-mapphone-common.dtsi | 79 ------------------- .../dts/ti/omap/motorola-mapphone-xt8xx.dtsi | 75 ++++++++++++++++++ .../dts/ti/omap/omap4-droid-bionic-xt875.dts | 11 ++- .../boot/dts/ti/omap/omap4-droid4-xt894.dts | 19 +++-- 4 files changed, 98 insertions(+), 86 deletions(-) create mode 100644 arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi --- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi @@ -6,15 +6,6 @@ #include "motorola-cpcap-mapphone.dtsi" / { - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &lcd0; - display1 = &hdmi0; - }; - /* * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, * then 1023 - 1024 seems to contain mbm. @@ -92,17 +83,6 @@ hsusb2_phy: usb-phy@2 { #phy-cells = <0>; }; - /* LCD regulator from sw5 source */ - lcd_regulator: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "lcd"; - regulator-min-microvolt = <5050000>; - regulator-max-microvolt = <5050000>; - gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ - enable-active-high; - vin-supply = <&sw5>; - }; - /* This is probably coming straight from the battery.. */ wl12xx_vmmc: regulator-wl12xx { compatible = "regulator-fixed"; @@ -160,14 +140,6 @@ vibrator { pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; - - backlight: backlight { - compatible = "led-backlight"; - - leds = <&backlight_led>; - brightness-levels = <31 63 95 127 159 191 223 255>; - default-brightness-level = <6>; - }; }; &cpu_thermal { @@ -197,57 +169,6 @@ &dss { status = "okay"; }; -&dsi1 { - status = "okay"; - vdd-supply = <&vcsi>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: panel@0 { - compatible = "motorola,droid4-panel", "panel-dsi-cm"; - reg = <0>; - label = "lcd0"; - vddi-supply = <&lcd_regulator>; - reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ - - backlight = <&backlight>; - - width-mm = <50>; - height-mm = <89>; - rotation = <90>; - - panel-timing { - clock-frequency = <0>; /* Calculated by dsi */ - - hback-porch = <2>; - hactive = <540>; - hfront-porch = <0>; - hsync-len = <2>; - - vback-porch = <1>; - vactive = <960>; - vfront-porch = <0>; - vsync-len = <1>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - &hdmi { status = "okay"; pinctrl-0 = <&dss_hdmi_pins>; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi new file mode 100644 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: panel@0 { + compatible = "motorola,droid4-panel", "panel-dsi-cm"; + reg = <0>; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + backlight = <&backlight>; + + width-mm = <50>; + height-mm = <89>; + rotation = <90>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts --- a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts @@ -1,11 +1,20 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { model = "Motorola Droid Bionic XT875"; compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; }; &keypad { diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts --- a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts @@ -1,9 +1,21 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { + model = "Motorola Droid 4 XT894"; + compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + gpio_keys { compatible = "gpio-keys"; @@ -33,11 +45,6 @@ slider { }; }; -/ { - model = "Motorola Droid 4 XT894"; - compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; -}; - &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>;