| Message ID | 20240102-j7200-pcie-s2r-v3-17-5c2e4a3fac1f@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add suspend to ram support for PCIe on J7200 | expand |
On Thu, Feb 15, 2024 at 04:18:02PM +0100, Thomas Richard wrote: > From: Théo Lebrun <theo.lebrun@bootlin.com> > > Add reset GPIO to struct j721e_pcie, so it can be used at suspend and > resume stages. ... > case PCI_MODE_RC: > - gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > - if (IS_ERR(gpiod)) { > - ret = PTR_ERR(gpiod); > + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(pcie->reset_gpio)) { > + ret = PTR_ERR(pcie->reset_gpio); > if (ret != -EPROBE_DEFER) > dev_err(dev, "Failed to get reset GPIO\n"); > goto err_get_sync; > @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev) > * mode is selected while enabling the PHY. So deassert PERST# > * after 100 us. > */ > - if (gpiod) { > + if (pcie->reset_gpio) { > usleep_range(100, 200); > - gpiod_set_value_cansleep(gpiod, 1); > + gpiod_set_value_cansleep(pcie->reset_gpio, 1); > } Instead of all this, just add one line assignment. Moreover, before or after this patch refactor the code to use ret = dev_err_probe(...); pattern that eliminates those deferral probe checks.
On 2/15/24 17:04, Andy Shevchenko wrote: > On Thu, Feb 15, 2024 at 04:18:02PM +0100, Thomas Richard wrote: >> From: Théo Lebrun <theo.lebrun@bootlin.com> >> >> Add reset GPIO to struct j721e_pcie, so it can be used at suspend and >> resume stages. > > ... > >> case PCI_MODE_RC: >> - gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); >> - if (IS_ERR(gpiod)) { >> - ret = PTR_ERR(gpiod); >> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); >> + if (IS_ERR(pcie->reset_gpio)) { >> + ret = PTR_ERR(pcie->reset_gpio); >> if (ret != -EPROBE_DEFER) >> dev_err(dev, "Failed to get reset GPIO\n"); >> goto err_get_sync; >> @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev) >> * mode is selected while enabling the PHY. So deassert PERST# >> * after 100 us. >> */ >> - if (gpiod) { >> + if (pcie->reset_gpio) { >> usleep_range(100, 200); >> - gpiod_set_value_cansleep(gpiod, 1); >> + gpiod_set_value_cansleep(pcie->reset_gpio, 1); >> } > > Instead of all this, just add one line assignment. Moreover, before or after > this patch refactor the code to use ret = dev_err_probe(...); pattern that > eliminates those deferral probe checks. Hi Andy, I'm not sure what you exactly want when you write "just add one line assignment". For the dev_err_probe() it's okay, it will be fixed in the next iteration. Regards,
On Mon, Feb 26, 2024 at 06:05:16PM +0100, Thomas Richard wrote: > On 2/15/24 17:04, Andy Shevchenko wrote: > > On Thu, Feb 15, 2024 at 04:18:02PM +0100, Thomas Richard wrote: > >> From: Théo Lebrun <theo.lebrun@bootlin.com> ... > >> case PCI_MODE_RC: > >> - gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > >> - if (IS_ERR(gpiod)) { > >> - ret = PTR_ERR(gpiod); > >> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > >> + if (IS_ERR(pcie->reset_gpio)) { > >> + ret = PTR_ERR(pcie->reset_gpio); > >> if (ret != -EPROBE_DEFER) > >> dev_err(dev, "Failed to get reset GPIO\n"); > >> goto err_get_sync; > >> @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev) > >> * mode is selected while enabling the PHY. So deassert PERST# > >> * after 100 us. > >> */ > >> - if (gpiod) { > >> + if (pcie->reset_gpio) { > >> usleep_range(100, 200); > >> - gpiod_set_value_cansleep(gpiod, 1); > >> + gpiod_set_value_cansleep(pcie->reset_gpio, 1); > >> } > > > > Instead of all this, just add one line assignment. Moreover, before or after > > this patch refactor the code to use ret = dev_err_probe(...); pattern that > > eliminates those deferral probe checks. > > Hi Andy, > > I'm not sure what you exactly want when you write "just add one line > assignment". pcie->reset_gpio = gpiod; That's it. No additional code changes are needed (WRT the above context, of course you want to have a new structure member).
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 2c87e7728a65..9c588e79f5ac 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -54,6 +54,7 @@ struct j721e_pcie { struct clk *refclk; u32 mode; u32 num_lanes; + struct gpio_desc *reset_gpio; void __iomem *user_cfg_base; void __iomem *intd_cfg_base; u32 linkdown_irq_regfield; @@ -359,7 +360,6 @@ static int j721e_pcie_probe(struct platform_device *pdev) struct j721e_pcie *pcie; struct cdns_pcie_rc *rc = NULL; struct cdns_pcie_ep *ep = NULL; - struct gpio_desc *gpiod; void __iomem *base; struct clk *clk; u32 num_lanes; @@ -468,9 +468,9 @@ static int j721e_pcie_probe(struct platform_device *pdev) switch (mode) { case PCI_MODE_RC: - gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(gpiod)) { - ret = PTR_ERR(gpiod); + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(pcie->reset_gpio)) { + ret = PTR_ERR(pcie->reset_gpio); if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to get reset GPIO\n"); goto err_get_sync; @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev) * mode is selected while enabling the PHY. So deassert PERST# * after 100 us. */ - if (gpiod) { + if (pcie->reset_gpio) { usleep_range(100, 200); - gpiod_set_value_cansleep(gpiod, 1); + gpiod_set_value_cansleep(pcie->reset_gpio, 1); } ret = cdns_pcie_host_setup(rc);