| Message ID | 20240308073501.3699-1-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: OMAP2+: prm33xx.c: Fix kerneldoc warnings | expand |
Hi Tony! On Fri, 2024-03-08 at 09:35 +0200, Tony Lindgren wrote: > Commit 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD") > added a new kerneldoc warning as the function name changed: > > warning: expecting prototype for am33xx_prm_global_warm_sw_reset(). > Prototype was for am33xx_prm_global_sw_reset() instead > > Turns out prm33xx.c produces a few other kerneldoc warnings so let's > fix them all. > > Fixes: 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD") > Cc: Alexander Sverdlin <alexander.sverdlin@siemens.com> > Cc: Matthias Michel <matthias.michel@siemens.com> > Cc: Randy Dunlap <rdunlap@infradead.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> My bad! Thanks for fixing this! Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> > --- > arch/arm/mach-omap2/prm33xx.c | 22 +++++++++++----------- > 1 file changed, 11 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c > --- a/arch/arm/mach-omap2/prm33xx.c > +++ b/arch/arm/mach-omap2/prm33xx.c > @@ -48,8 +48,7 @@ static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) > * @part: PRM partition, ignored for AM33xx > * @inst: CM instance register offset (*_INST macro) > * @rstctrl_offs: RM_RSTCTRL register address offset for this module > - * > - * Returns 1 if the (sub)module hardreset line is currently asserted, > + * @return: 1 if the (sub)module hardreset line is currently asserted, > * 0 if the (sub)module hardreset line is not currently asserted, or > * -EINVAL upon parameter error. > */ > @@ -70,14 +69,14 @@ static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst, > * @shift: register bit shift corresponding to the reset line to assert > * @part: CM partition, ignored for AM33xx > * @inst: CM instance register offset (*_INST macro) > - * @rstctrl_reg: RM_RSTCTRL register address for this module > + * @rstctrl_offs: RM_RSTCTRL register address offset for this module > + * @return: Returns 0 upon success or -EINVAL upon an argument error > * > * Some IPs like dsp, ipu or iva contain processors that require an HW > * reset line to be asserted / deasserted in order to fully enable the > * IP. These modules may have multiple hard-reset lines that reset > * different 'submodules' inside the IP block. This function will > - * place the submodule into reset. Returns 0 upon success or -EINVAL > - * upon an argument error. > + * place the submodule into reset. > */ > static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst, > u16 rstctrl_offs) > @@ -96,17 +95,18 @@ static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst, > * @st_shift: reset status register bit shift corresponding to the reset line > * @part: PRM partition, not used for AM33xx > * @inst: CM instance register offset (*_INST macro) > - * @rstctrl_reg: RM_RSTCTRL register address for this module > - * @rstst_reg: RM_RSTST register address for this module > + * @rstctrl_offs: RM_RSTCTRL register address offset for this module > + * @rstst_offs: RM_RSTST register address offset for this module > + * @return: Returns 0 upon success or -EINVAL upon an argument error, > + * -EEXIST if the submodule was already out of reset, or -EBUSY if the > + * submodule did not exit reset promptly > * > * Some IPs like dsp, ipu or iva contain processors that require an HW > * reset line to be asserted / deasserted in order to fully enable the > * IP. These modules may have multiple hard-reset lines that reset > * different 'submodules' inside the IP block. This function will > * take the submodule out of reset and wait until the PRCM indicates > - * that the reset has completed before returning. Returns 0 upon success or > - * -EINVAL upon an argument error, -EEXIST if the submodule was already out > - * of reset, or -EBUSY if the submodule did not exit reset promptly. > + * that the reset has completed before returning. > */ > static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, > s16 inst, u16 rstctrl_offs, > @@ -315,7 +315,7 @@ static int am33xx_check_vcvp(void) > } > > /** > - * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset > + * am33xx_prm_global_sw_reset - reboot the device via warm reset > * > * Immediately reboots the device through warm reset. > */
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -48,8 +48,7 @@ static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) * @part: PRM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) * @rstctrl_offs: RM_RSTCTRL register address offset for this module - * - * Returns 1 if the (sub)module hardreset line is currently asserted, + * @return: 1 if the (sub)module hardreset line is currently asserted, * 0 if the (sub)module hardreset line is not currently asserted, or * -EINVAL upon parameter error. */ @@ -70,14 +69,14 @@ static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst, * @shift: register bit shift corresponding to the reset line to assert * @part: CM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) - * @rstctrl_reg: RM_RSTCTRL register address for this module + * @rstctrl_offs: RM_RSTCTRL register address offset for this module + * @return: Returns 0 upon success or -EINVAL upon an argument error * * Some IPs like dsp, ipu or iva contain processors that require an HW * reset line to be asserted / deasserted in order to fully enable the * IP. These modules may have multiple hard-reset lines that reset * different 'submodules' inside the IP block. This function will - * place the submodule into reset. Returns 0 upon success or -EINVAL - * upon an argument error. + * place the submodule into reset. */ static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst, u16 rstctrl_offs) @@ -96,17 +95,18 @@ static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst, * @st_shift: reset status register bit shift corresponding to the reset line * @part: PRM partition, not used for AM33xx * @inst: CM instance register offset (*_INST macro) - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @rstst_reg: RM_RSTST register address for this module + * @rstctrl_offs: RM_RSTCTRL register address offset for this module + * @rstst_offs: RM_RSTST register address offset for this module + * @return: Returns 0 upon success or -EINVAL upon an argument error, + * -EEXIST if the submodule was already out of reset, or -EBUSY if the + * submodule did not exit reset promptly * * Some IPs like dsp, ipu or iva contain processors that require an HW * reset line to be asserted / deasserted in order to fully enable the * IP. These modules may have multiple hard-reset lines that reset * different 'submodules' inside the IP block. This function will * take the submodule out of reset and wait until the PRCM indicates - * that the reset has completed before returning. Returns 0 upon success or - * -EINVAL upon an argument error, -EEXIST if the submodule was already out - * of reset, or -EBUSY if the submodule did not exit reset promptly. + * that the reset has completed before returning. */ static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst, u16 rstctrl_offs, @@ -315,7 +315,7 @@ static int am33xx_check_vcvp(void) } /** - * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset + * am33xx_prm_global_sw_reset - reboot the device via warm reset * * Immediately reboots the device through warm reset. */
Commit 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD") added a new kerneldoc warning as the function name changed: warning: expecting prototype for am33xx_prm_global_warm_sw_reset(). Prototype was for am33xx_prm_global_sw_reset() instead Turns out prm33xx.c produces a few other kerneldoc warnings so let's fix them all. Fixes: 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD") Cc: Alexander Sverdlin <alexander.sverdlin@siemens.com> Cc: Matthias Michel <matthias.michel@siemens.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/prm33xx.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)